Manual

Rugged Expandable
AGP-3175
Touch Panel PC
Chapter 2 Hardware Installation 2-15
2.21 Panel Mount Kit Installation
Some screw sets will come with the product for user to mount the
AGP-3175 on the wall. See the steps below along with the
illustration.
Step 1
: Bore the screw into the screw nut.
Step 2
: Locate the screw set into the hole around the monitor as
the right illustration and pull it back to lock the screw set
on the hole.
Step 3
: Turn the screw around to make it tight until it is closed to
the wall.
Step 4
: Lock the monitor to the wall with the screw set and finish
the installation