Touch Panel PC AHP-1070 AHP-1070 TI OMAP 600 MHz Processor Fanless Touch Panel PC With 7” 16:9 WVGA TFT LCD Slim Design AHP-1070 Manual 1st Ed.
Touch Panel PC AHP-1070 Copyright Notice This document is copyrighted, 2010. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Touch Panel PC AHP-1070 Acknowledgments All other products’ name or trademarks are properties of their respective owners. • Award is a trademark of Award Software International, Inc. • RTL is a trademark of Realtek Semi-Conductor Co., Ltd. • Microsoft Windows is a registered trademark of Microsoft Corp. • IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation. • ESS is a trademark of ESS Technology, Inc.
Touch Panel PC AHP-1070 Packing List Before you begin operating your PC, please make sure that the following materials are enclosed: • AHP-1070 Fanless Touch Panel PC • Mounting bracket, screws and sponge • CD-ROM for manual (in PDF format) and Windows CE SDK If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Touch Panel PC AHP-1070 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 4. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a firm surface during installation.
Touch Panel PC AHP-1070 d. The equipment does not work well, or you cannot get it to work according to the user’s manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage. 15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE EQUIPMENT. FCC This device complies with Part 15 FCC Rules.
Touch Panel PC AHP-1070 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Panel PC/ Workstation 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 硬盘 × ○ ○ ○ ○ ○ 液晶模块 × ○ ○ ○ ○ ○ 光驱 × ○ ○ ○ ○ ○ 触控模块 × ○ ○ ○ ○ ○ 电源 × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 外壳 中央处理器 与内存 O:表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/
Touch Panel PC AHP-1070 Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Specification .............................................................. 1-3 1.3 Dimension ................................................................. 1-6 Chapter 2 Hardware Installation 2.1 Panelmount Installation ............................................. 2-2 2.2 COM2 RS-232/422/485 Connector (DSUB-9 MALE) 2-3 2.
Touch Panel PC AHP-1070 Chapter 1 General Information Chapter 1 General Information 1- 1
Touch Panel PC AHP-1070 1.1 Introduction The AHP-1070 operator panel is an onboard TI OMAP 600MHz processor computer that is designed to serve as a human machine interface (HMI). It is an ARM Core system with 7” 16:9 WVGA TFT LCD display, onboard Ethernet controller and multi-COM port interfaces. With a built-in 256MB ROM onboard and SD card expansion, the AHP-1070 is as compact and user friendly as a multi-function computer.
Touch Panel PC AHP-1070 1.
Touch Panel PC AHP-1070 Mechanical • Construction Plastic (ASB) front bezel + Aluminum chassis • Front Panel Color Patone 5425C • Mounting Wallmount/ VESA mount/ Desktop • Cutout Size 7.6” x 5.67” (193mm x 144mm) • Dimension 8.9” (W) x 6.1” (H) x 1.77” (D) (225mm x 156mm x 45mm) • Carton Dimension 11.4” (W) x 7.5” (H) x 9.1” (D) (290mm x 190mm x 230mm) • Gross Weight 4.4 lb (2 kg) • Net Weight 1.54 lb (0.
Touch Panel PC • AHP-1070 Power Supply DC 12V • Display Type 7” WVGA, LED backlight • Response Time (sec) 10 • Max. Colors 262K • Luminance 350 cd/m2 (TYP.) • Contrast Ratio 250:1 • Viewing Angle 140o (H) x 120o (V) • Backlight MTBF (hrs) 30,000 LCD Touch screen • Type 4-wire, analog resistive • Resolution 2048x2048 • Light Transmission >80% • Lifetime 10 million activations • OS Support Windows CE. 6.
Touch Panel PC 1.
Touch Panel PC AHP-1070 Chapter 1 General Information 1-7
Touch Panel PC AHP-1070 Chapter 2 Hardware Installation Chapter 2 Quick Installation Guide 2-1
Touch Panel PC AHP-1070 2.1 Panelmount Installation The display panel can be mounted into the wall. You will need the screws along with the mounting brackets, which be packed in the accessory box. Follow the steps below: Before you start to follow the instructions, please place the display panel into the wall. See the following illustration on the left. Step 1: Place the mounting brackets and plug the screw. Step 2: Aim the mounting set at the hole on the monitor.
Touch Panel PC AHP-1070 2.2 COM2 RS-232/422/485 Connector (DSUB-9 MALE) 4 2 5 1 9 6 7 Pin 1 3 Signal 8 Pin DCD (422TXD-/485DATA-) TX (422TXD+/485DATA+) Signal 2 RX (422RXD+) 4 DTR (422RXD-) 5 GND 6 NC 7 RTS 8 CTS 9 NC/+3.3Volt/+5Volt 2.
Touch Panel PC AHP-1070 Chapter 3 Software Installation Guide Chapter 3 Software Installation Guide 3-1
Touch Panel PC AHP-1070 3.1 Introduction AHP-1070 is preloaded with Windows CE 6.0. After applying with power, the system will boot directly to Windows CE. 3.2 Permanent Storage The system comes with an on board NAND Flash for permanent storage. It is mounted under “/NAND Flash” folder. The storage space is around 200MB. User requires to put all permanent data in “/NAND Flash” folder. All other places in the file system are ram image.
Touch Panel PC AHP-1070 GPIO: To control GPIO pins on CN4, a sample application with source code guides user to develop custom applications using GPIO pins. A readme file is provided with the source code. Watchdog: To utilize watchdog timer function on AHP-1070, a sample application with source code guides user to develop custom applications using GPIO pins. A readme file is provided with the source code. 3.6 SDK installation AHP-1070 CD-ROM includes SDK for user to build custom applications.