Embedded Controller CES-CV101 CES-CV101 Embedded Controller Intel® Atom™ D2550 1.86GHz Processor 3 GbE LAN, 4 USB2.0, 6 COM 1 Mini Card st CES-CV101 Manual 1 Ed.
Embedded Controller CES-CV101 Copyright Notice T This document is copyrighted, 2014. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Embedded Controller CES-CV101 Acknowledgments All other products’ name or trademarks are properties of their respective owners. AMI is a trademark of American Megatrends, Inc. CompactFlash is a trademark of the Compact Flash Association. Microsoft Windows is a registered trademark of Microsoft Corp. Intel , Atom™ are trademarks of Intel Corporation. PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation.
Embedded Controller CES-CV101 Packing List Before you begin operating your PC, please make sure that the following materials are enclosed: 1 CES-CV101 Embedded Controller 2 Wallmount Brackets 1 Screw Package 1 DVD-ROM for manual (in PDF format) and drivers 1 Phoenix Power Connector If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Embedded Controller CES-CV101 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 4. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a firm surface during installation.
Embedded Controller CES-CV101 d. The equipment does not work well, or you cannot get it to work according to the user’s manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage. 15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR ABOVE 70°C (158°F). IT MAY DAMAGE THE EQUIPMENT.
Embedded Controller CES-CV101 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Boxer/ Industrial System 有毒有害物质或元素 部件名称 铅 汞 镉 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 硬盘 × ○ ○ ○ ○ ○ 电源 × ○ ○ ○ ○ ○ 印刷电路板 六价铬 多溴联苯 多溴二苯醚 及其电子组件 外部信号 连接器及线材 外壳 中央处理器 与内存 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注： 一、此产品所标示之环保使用期限，系指在一般正常使用状况下。 二、
Embedded Controller CES-CV101 C Chapter 1 General Information 1.1 Introduction ................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Hardware Installation 2.1 Dimension and I/O of CES-CV101 ............................ 2-2 2.2 Location of Connectors and Jumpers of the Main Board ..................................
Embedded Controller CES-CV101 2.17 RJ45 Ethernet/Dual USB (CN6) .............................. 2-15 2.18 Dual RJ-45 Ethernet (CN7) ................................... 2-16 2.19 LVDS Port Inverter / Backlight Connector (Optional) (CN8) ............................................................................... 2-17 2.20 CFast Slot (CN16) ................................................... 2-17 2.21 USB Pin Header (Port6) (USB1) ............................. 2-18 2.22 DUAL USB (CN19 ....................
Embedded Controller CES-CV101 Appendix A Programming The Watchdog Timer A.1 Watchdog Timer Registers ..................................A-2 A.2 Watchdog Sample Program .................................A-4 Appendix B I/O Information B.1 I/O Address Map ..................................................B-2 st B.2 1 MB Memory Address Map ...............................B-4 B.3 IRQ Mapping Chart ..............................................B-5 B.4 DMA Channel Assignments .................................
Embedded Controller CES-CV101 Chapter 1 General Information Chapter 1 General Information 1- 1
Embedded Controller CES-CV101 1.1 Introduction AAEON introduces the newest product in the Boxer series, ® CES-CV101, which utilizes the Intel processor and Intel ® Atom™ D2550 1.86 GHz NM10 chipset: this embedded controller expands its graphics performance greatly with the Atom™ processors.
Embedded Controller CES-CV101 1.2 Features Fanless Design Supports Intel Atom D2550 1.86GHz Processor Onboard DDR3 800/1066MHz 2GB RAM VGA & DVI output support 18/24-bit single channel LVDS (depending on selected CPU) Onboard Realtek RTL8111E Gigabit Ethernet x 2 SATA interface x 1, CFast x 1 (Default) co-lay with CFD connector Mini Card x 1 RS-232 x 4, RS-232/422/485 x 2 with isolated/ Auto flow control/ full-function USB2.
Embedded Controller CES-CV101 1.3 Specifications System ® CPU Intel AtomTM D2550 1.86 GHz Processor Memory DDR3 800/1066 SODIMM x 1, Max. 2GB Storage 2.5” HDD Bay x 1 (SATA interface) Front I/O Power ON/OFF switch x 1 System ON LED x 1 HDD active LED x 1 LAN LED (Link + Active) x 3 USB 2.
Embedded Controller Power Supply CES-CV101 AT/ ATX power function DC Input 12~24V, with 2-pin Phoenix connector OS Support Windows® XP Pro 32bit, Windows® XP Embedded 32 bit, Windows® 7 32 bit, Linux Fedora Mechanical and Environmental Construction Aluminum Alloy Chassis Color Dark Gray Mounting Wallmount Dimension 7.76”(W) x 5.63”(H) x 2.11”(D) (197 mm x 143 mm x 53.5 mm) Gross Weight 5.5 lb (2.5 kg) Net Weight 3.3 lb (1.
Embedded Controller CES-CV101 Chapter 2 Hardware Installation Chapter 2 Hardware Installation 2-1
Embedded Controller 2.
Embedded Controller CES-CV101 2.
Embedded Controller Solder Side Chapter 2 Hardware Installation 2 - 4 CES-CV101
Embedded Controller CES-CV101 2.3 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
Embedded Controller CES-CV101 2.4 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
Embedded Controller CES-CV101 2.5 LVDS Operating VDD Selection (JP1) 1 2 3 1 2 3 +5V +3.3V (Default) JP1 Function 1-2 +5V 2-3 +3.3V (Default) 2.6 LVDS Backlight Inverter VCC Selection (JP2) 1 2 3 1 2 3 +12V +5V (Default) JP2 Function 1-2 +12V 2-3 +5V (Default) 2.
Embedded Controller CES-CV101 2.8 COM1 RS-422 RX Termination (JP4) 1 2 3 1 2 3 No Termination Termination With 120 ohm JP4 Function 1-2 No Termination 2-3 Termination with 120 ohm 2.9 COM1 RS-422 TX Termination/ RS485 Termination (JP5) 1 2 3 1 2 3 No Termination Termination With 120 ohm JP5 Function 1-2 No Termination 2-3 Termination with 120 ohm 2.
Embedded Controller CES-CV101 2.11 Clear CMOS Jumper (JP9) 1 2 3 1 2 3 Normal (Default) Clear CMOS JP9 Function 1-2 Normal (Default) 2-3 Clear CMOS 2.
Embedded Controller CES-CV101 5 GND GND 6 RED_GND_RTN GND 7 GREEN_GND_RTN GND 8 BLUE_GND_RTN GND 9 +5V PWR 10 GND GND 11 NC 12 DDC_DATA I/O 13 HSYNC OUT 14 VSYNC OUT 15 DDC_CLK I/O +5V Pin Pin Name Signal Type Signal Level 1 TMDS_DAT2+ DIFF 2 TMDS_DAT2- DIFF 3 GND GND 4 VGA_DDC_CLK I/O 5 VGA_DDC _DATA I/O 6 DVI_DDC_CLK I/O +5V 7 DVI_DDC_DATA I/O +5V 8 VSYNC OUT 9 TMDS_DAT1- DIFF 10 TMDS_DAT1+ DIFF +5V +5V DVI Chapter 2 Hardware Instal
Embedded Controller CES-CV101 11 GND GND 12 TMDS_DAT3- DIFF 13 TMDS_DAT3+ DIFF 14 +5V PWR 15 GND GND 16 HPLG_DETECT IN 17 TMDS_DAT0- DIFF 18 TMDS_DAT0+ DIFF 19 GND GND 20 NC 21 NC 22 GND GND 23 TMDS_CLK+ DIFF 24 TMDS_CLK- DIFF C1 RED OUT C2 GREEN OUT C3 BLUE OUT C4 HSYNC OUT C5 GND_ANALOG GND +5V 2.
Embedded Controller CES-CV101 Pin Pin Name Signal Type Signal Level 1 Power In PWR +12V~+24V 2 GND GND 2.
Embedded Controller CES-CV101 3 RS422_RX+ IN 4 RS422_RX- IN 5 GND GND Pin Pin Name Signal Type 1 RS485_D- I/O 2 RS485_D+ I/O GND GND RS-485 Signal Level 3 4 5 2.
Embedded Controller CES-CV101 6 DSR IN 7 RTS OUT 8 CTS IN 9 RI IN 2.
Embedded Controller CES-CV101 2.
Embedded Controller CES-CV101 USB4 Pin Pin Name Signal Type Signal Level 1 +5VSB PWR ±5V 2 USB3_D- DIFF 3 USB3_D+ DIFF 4 GND GND ±5V 2.
Embedded Controller 8 MDI3- CES-CV101 DIFF 2.19 LVDS Port Inverter / Backlight Connector (Optional) (CN8) 1 BLK_PWR 2 BKL_CONTROL 3 GND 4 GND 5 BKL_ENABLE Pin Pin Name Signal Type Signal Level 1 BKL_PWR PWR +5V / +12V 2 BKL_CONTROL OUT 3 GND GND 4 GND GND 5 BKL_ENABLE OUT +5V Signal Level 2.
Embedded Controller CES-CV101 PC2 GND GND PC3 NC PC4 NC PC5 NC PC6 NC PC7 GND PC8 NC PC9 NC PC10 NC PC11 NC PC12 NC PC13 +3.3V PWR +3.3V PC14 +3.3V PWR +3.3V PC15 GND GND PC16 GND GND PC17 NC GND 2.
Embedded Controller CES-CV101 Pin Pin Name Signal Type Signal Level 1 +5V PWR +5V 2 USB5_D- DIFF 3 USB5_D+ DIFF 4 GND GND 5 GND GND 2.
Embedded Controller CES-CV101 2.23 COM Port 5/6 (D-SUB 9) (CN20) Pin Pin Name Signal Type 1 DCD IN 2 RX IN 3 TX OUT 4 DTR OUT 5 GND GND 6 DSR IN 7 RTS OUT 8 CTS IN 9 RI IN 2.
Embedded Controller CES-CV101 Pin Pin Name Signal Type Signal Level 1 +5V PWR +5V 2 USB4_D- DIFF 3 USB4_D+ DIFF 4 GND GND 5 GND GND 2.25 18/24-bit LVDS Output(Optional) (LVDS1) PIN 2 PIN 30 PIN 1 PIN 29 Pin Pin Name Signal Type 1 BKL_ENABLE OUT 2 BKL_CONTROL OUT 3 LCD_PWR PWR 4 GND GND 5 LVDS_A_CLK- DIFF 6 LVDS_A_CLK+ DIFF Signal Level +3.
Embedded Controller CES-CV101 7 LCD_PWR PWR 8 GND GND 9 LVDS_DA0- DIFF 10 LVDS_DA0+ DIFF 11 LVDS_DA1- DIFF 12 LVDS_DA1+ DIFF 13 LVDS_DA2- DIFF 14 LVDS_DA2+ DIFF 15 LVDS_DA3- DIFF 16 LVDS_DA3+ DIFF 17 DDC_DATA I/O +3.3V 18 DDC_CLK I/O +3.
Embedded Controller CES-CV101 2.26 SATA Port (SATA1) Pin 1 Pin 7 Pin Pin Name Signal Type 1 GND GND 2 SATA_TX+ DIFF 3 SATA_TX- DIFF 4 GND GND 5 SATA_RX- DIFF 6 SATA_RX+ DIFF 7 GND GND Signal Level 2.
Embedded Controller CES-CV101 2.28 Digital IO Header (4in /4out) (DIO1) 1 3 5 7 9 2 4 6 8 10 Pin Pin Name 1 DIO0 2 DIO1 3 DIO2 4 DIO3 5 DIO4 6 DIO5 7 DIO6 8 DIO7 9 +3.3V 10 GND Signal Type Signal Level Signal Level 2.29 Mini PCIe Slot (MINICARD) Pin Pin Name Signal Type 1 PCIE_WAKE# IN 2 +3.3VSB PWR 3 NC 4 GND Chapter 2 Hardware Installation 2 - 24 GND +3.
Embedded Controller CES-CV101 5 NC 6 +1.5V PWR 7 PCIE_CLK_REQ# IN 8 UIM_PWR PWR 9 GND GND 10 UIM_DATA I/O 11 PCIE_REF_CLK- DIFF 12 UIM_CLK IN 13 PCIE_REF_CLK+ DIFF 14 UIM_RST IN 15 GND GND 16 UIM_VPP PWR 17 NC 18 GND 19 NC 20 W_DISABLE# OUT 21 GND GND 22 PCIE_RST# OUT 23 PCIE_RX- DIFF 24 +3.3VSB PWR 25 PCIE_RX+ DIFF 26 GND GND 27 GND GND 28 +1.5V PWR +1.5V GND +3.3V +3.3V +3.3V +1.
Embedded Controller CES-CV101 29 GND GND 30 SMB_CLK I/O 31 PCIE_TX- DIFF 32 SMB_DATA I/O 33 PCIE_TX+ DIFF 34 GND GND 35 GND GND 36 USB_D- DIFF 37 GND GND 38 USB_D+ DIFF 39 +3.3VSB PWR 40 GND GND 41 +3.3VSB PWR 42 NC 43 GND 44 NC 45 NC 46 NC 47 NC 48 +1.5V 49 NC 50 GND 51 NC 52 +3.3VSB Chapter 2 Hardware Installation 2 - 26 +3.3V +3.3V +3.3V +3.3V GND PWR +1.5V GND PWR +3.
Embedded Controller CES-CV101 2.30 CMOS Battery Connector (BAT1A1) Pin Pin Name Signal Type Signal Level 1 3.3VSB PWR +3.3V 2 GND GND 2.31 List of Buttons and Indicators Connectors on board access link to external devices such as hard disk drives, a keyboard.
Embedded Controller CES-CV101 2.
Embedded Controller CES-CV101 Step 3: Unfasten the four screws of the HDD bracket, and disconnect the SATA and power cables Step 4: Take out the HDD vertically to separate the HDD and the bottom case of the Box PC Chapter 2 Hardware Installation 2 - 29
Embedded Controller CES-CV101 Step 5: Unfasten the four screws on the back of the HDD bracket.
Embedded Controller CES-CV101 2.
Embedded Controller Step 3: Fasten the brackets with the screws. Step 4: Fasten the brackets with the screws. We suggest using this screw.
Embedded Controller CES-CV101 Chapter 3 AMI BIOS Setup Chapter 3 Award BIOS Setup 3-1
Embedded Controller 3.1 CES-CV101 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors. System configuration verification These routines check the current system configuration against the values stored in the CMOS memory.
Embedded Controller 3.2 CES-CV101 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press or immediately. This will allow you to enter Setup. Main Set the date, use tab to switch between date elements.
Embedded Controller CES-CV101 Setup Menu Setup submenu: Main Options summary: (default setting) System Date Day MM:DD:YYYY Change the month, year and century. The ‘Day’ is changed automatically. System Time HH : MM : SS Change the clock of the system.
Embedded Controller CES-CV101 Setup submenu: Advanced Options summary: (default setting) ACPI Settings System ACPI Parameters CPU Configuration CPU Configuration Parameters IDE Configuration IDE Device Options Settings USB Configuration USB Configuration Parameters Chapter 3 Award BIOS Setup 3-5
Embedded Controller F81866 Super IO Configuration Port Configuration Super IO Configuration Parameters F81866 H/W Monitor Monitor hardware status IRQ Configuration Configure IRQs for ISA or PCI devices.
Embedded Controller CES-CV101 Options summary: (default setting) Enabled Enable Hibernation Disabled Enabled or disabled hibernate (OS/S4 Sleep State). Suspend Disabled ACPI Sleep State S1 only(CPU Stop Clock) S3 only(Suspend to RAM) Select the ACPI state used for System Suspend Enabled Wake on Ring Disabled Enabled or disabled wake on ring function. RTC Wake Settings Enable system to wake from S5 using RTC alarm.
Embedded Controller CES-CV101 RTC Wake Settings Options summary: (default setting) Wake system with Fixed Disabled Time Enabled Enable or disable System wake on alarm event. Wake up time is setting by following settings.
Embedded Controller Wake up minute 0-59 Wake up second 0-59 Wake system with Disabled Dynamic Time Enabled CES-CV101 Enable or disable System wake on alarm event. Wake up time is current time + Increase minutes.
Embedded Controller CPU Configuration Options summary: (default setting) Hyper-Threading Disabled Enabled En/Disable CPU Hyper-Threading function Execute Disable Bit Disabled Enabled En/Disable XD bit for supporting OS Limit CPUID Maximum Disabled Enabled Disabled for Windows XP Chapter 3 AMI BIOS Setup 3-10 CES-CV101
Embedded Controller CES-CV101 CPU Power Management Configure CPU PPM parameters CPU Power Management Options summary: (default setting) EIST Disabled Enabled En/Disable Intel SpeedStep CPU C State Report Disabled Enabled Chapter 3 Award BIOS Setup 3-11
Embedded Controller CES-CV101 Report C State support for ACPI OS IDE Configuration Options summary: (default setting) SATA Controller(s) Disabled Enabled En/Disable SATA controller Configure SATA as IDE AHCI Configure SATA controller operating as IDE/AHCI mode.
Embedded Controller CES-CV101 USB Configuration Options summary: (default setting) Legacy USB Support Enabled Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS. AUTO option disables legacy support if no USB devices are connected.
Embedded Controller CES-CV101 Forced FDD Hard Disk CD-ROM If Auto. USB devices less than 530MB will be emulated as Floppy and remaining as Floppy and remaining as hard drive. Forced FDD option can be used to force a HDD formatted drive to boot as FDD(Ex.
Embedded Controller CES-CV101 Set Parameters of Serial Port 1/2/3/4/5/6 Power Failure Configure system state after power failure. Serial Port 1/2/3/4/5/6 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port.
Embedded Controller CES-CV101 IO=3F8h; IRQ=3,4,5,7,10,11,12; IO=2F8h; IRQ=3,4,5,7,10,11,12; IO=3E8h; IRQ=3,4,5,7,10,11,12; IO=2E8h; IRQ=3,4,5,7,10,11,12; Change Settings Auto (COM2) IO=2F8h; IRQ=3; IO=3F8h; IRQ=3,4,5,7,10,11,12; IO=2F8h; IRQ=3,4,5,7,10,11,12; IO=3E8h; IRQ=3,4,5,7,10,11,12; IO=2E8h; IRQ=3,4,5,7,10,11,12; Change Settings Auto (COM3) IO=3E8h; IRQ=7; IO=3E8h; IRQ=3,4,5,7,10,11,12; IO=2E8h; IRQ=3,4,5,7,10,11,12; IO=2D0h; IRQ=3,4,5,7,10,11,12; IO=2C0h; IRQ=3,4,5,7,10,11,12; Change Setti
Embedded Controller CES-CV101 IO=3E8h; IRQ=3,4,5,7,10,11,12; IO=2E8h; IRQ=3,4,5,7,10,11,12; IO=2D0h; IRQ=3,4,5,7,10,11,12; IO=2C0h; IRQ=3,4,5,7,10,11,12; Change Settings Auto (COM6) IO=2C0h; IRQ=10; IO=3E8h; IRQ=3,4,5,7,10,11,12; IO=2E8h; IRQ=3,4,5,7,10,11,12; IO=2D0h; IRQ=3,4,5,7,10,11,12; IO=2C0h; IRQ=3,4,5,7,10,11,12; Select a resource setting for Super IO device. Port Mode RS232 RS422 RS485 Configure COM operated as RS232, RS422 or RS485. Only COM1 and COM2 support this function.
Embedded Controller Digital IO Port Configuration Options summary: (default setting) DIO Port1/2/3/4 Input Output Set DIO Port1/2/3/4 as Input or Output DIO Port5/6/7/8 Input Output Set GPIO3/GPIO4 as Input or Output Output Level Hi Low Set GPIO Level when used as Output Chapter 3 AMI BIOS Setup 3-18 CES-CV101
Embedded Controller CES-CV101 H/W Monitor Chapter 3 Award BIOS Setup 3-19
Embedded Controller IRQ Configuration Options summary: (default setting) IRQ 3/4/5/7/10/11/15 For PCI Reserved IRQ 14 For PCI Reserved Select IRQ usage Chapter 3 AMI BIOS Setup 3-20 CES-CV101
Embedded Controller CES-CV101 Setup submenu: Chipset Options summary: (default setting) Host Bridge Host Bridge Parameters South Bridge South Bridge Parameters Chapter 3 Award BIOS Setup 3-21
Embedded Controller Host Bridge Options summary: (default setting) Fixed Graphics Memory 128MB Size 256MB Configure Fixed Graphics Memory Size IGFX - Boot Type Auto Detect CRT DVI Select Primary boot display device Chapter 3 AMI BIOS Setup 3-22 CES-CV101
Embedded Controller CES-CV101 South Bridge Options summary: (default setting) Onboard Devices Onboard devices parameters configurations High Precision Timer Enabled Disabled Enable or Disable the High Precision Event Timer Power Mode ATX Type AT Type Select the power type used on the system SLP_S4 Assertion Width 1-2 Seconds Chapter 3 Award BIOS Setup 3-23
Embedded Controller CES-CV101 2-3 Seconds 3-4 Seconds 4-5 Seconds Select a minimum assertion width of the SLP_S4# signal Onboard Devices Options summary: (default setting) Azalia Controller Disabled HD Audio Enable or disabled Azalia controller LAN1/2/3 Controller Chapter 3 AMI BIOS Setup 3-24 Disabled
Embedded Controller CES-CV101 Enabled Enable or disable Realtek R8111E PCIE Lan Device SMBus Controller Disabled Enabled Enable or Disable OnChip SMBus Controller Setup submenu: Boot Options summary: (default setting) Quiet Boot Disabled Enabled En/Disable showing boot logo.
Embedded Controller Launch LAN1/2/3 PXE Disabled OpROM Enabled CES-CV101 En/Disable PXE boot for RTL8111E LAN Boot Option #X/ XXXX Drive BBS Priorities The order of boot priorities.
Embedded Controller CES-CV101 Setup submenu: Security Options summary: (default setting) Administrator Password/ Not set User Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility. Install the Password: Press Enter on this item, a dialog box appears which lets you enter a password. You can enter no more than six letters or numbers.
Embedded Controller Setup submenu: Exit Options summary: (default setting) Save Changes and Reset Reset the system after saving the changes Discard Changes and Reset Reset system setup without saving any changes Restore Defaults Restore/Load Default values for all the setup options.
Embedded Controller CES-CV101 Chapter 4 Driver Installation 0B Chapter 4 Driver Installation 4 - 1
Embedded Controller CES-CV101 The CES-CV101 comes with a DVD-ROM that contains all drivers and utilities that meet your needs.
Embedded Controller CES-CV101 4.1 Installation: Insert the CES-CV101 DVD-ROM into the DVD-ROM drive, and then install the drivers from Step 1 to Step 6 in order. Step 1 – Install Chipset Driver 1. Click on the STEP1-CHIPSET folder and select the OS folder according to your operating system. 2. Double click on the infinst_autol.exe file located in each OS folder 3. Follow the instructions that the window shows 4.
Embedded Controller CES-CV101 automatically 2. Install IEMGD Double click on the IEMGDInstall.
Embedded Controller CES-CV101 If you want to update driver, please uninstall driver first. Uninstall IEMGD 1. Double click on the IEMGDInstall.exe 2. Follow the instructions that the window shows 3.
Embedded Controller CES-CV101 Step 3 – Install SATA Driver (optional, for SATA in AHCI mode only) 1. Click on the STEP3-SATA folder and select the OS folder according to your operating system. 2. Double click on the Setup.exe file located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Note: AHCI mode is not supported by native Windows XP installation process.
Embedded Controller CES-CV101 4. The system will help you install the driver automatically Step 6 – Serial Port Driver (Optional) Please refer to readme.txt in the STEP6 - Serial Port Driver (Optional) folder.
Embedded Controller CES-CV101 Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Embedded Controller CES-CV101 A.1 Watchdog Timer Registers I/O Base Address Table 1 : Watch dog relative IO address Default Note Value I/O Base address for Watchdog operation. 0xA10 This address is assigned by SIO LDN7, register 0x60-0x61.
Embedded Controller Status Timer Counter 0x06 CES-CV101 Write a 1 to clear timeout status Time of watchdog timer (0~255) Appendix A Programming the Watchdog Timer A-3
Embedded Controller CES-CV101 A.
Embedded Controller CES-CV101 AaeonWDTEnable(); } ******************************************************************************* ******************************************************************************* // Procedure : AaeonWDTEnable VOID AaeonWDTEnable (){ WDTEnableDisable(1); } // Procedure : AaeonWDTConfig VOID AaeonWDTConfig (byte Counter, BOOLEAN Unit){ // Disable WDT counting WDTEnableDisable(0); // Clear Watchdog Timeout Status WDTClearTimeoutStatus(); // WDT relative parameter setting WDTPar
Embedded Controller CES-CV101 WDTSetBit(TimerReg, PSWidthBit, PSWidthVal); // Watchdog WDTRST# Enable WDTSetBit(DevReg, WDTRstBit, WDTRstVal); } VOID WDTClearTimeoutStatus(){ WDTSetBit(TimerReg, StatusBit, 1); } ******************************************************************************* ******************************************************************************* VOID WDTWriteByte(byte Register, byte Value){ IOWriteByte(WDTAddr+Register, Value); } byte WDTReadByte(byte Register){ return IOReadByte(W
Embedded Controller CES-CV101 Appendix B I/O Information Appendix B I/O Information B-1
Embedded Controller B.
Embedded Controller CES-CV101 Appendix B I/O Information B - 3
Embedded Controller st B.
Embedded Controller CES-CV101 B.3 IRQ Mapping Chart B.
Embedded Controller CES-CV101 Appendix C AHCI Setting Appendix C AHCI Setting C-1
Embedded Controller CES-CV101 C.1 Setting AHCI OS installation to SETUP AHCI Mode Step 1: Copy below files from “Driver CD -> STEP3-SATA \WinXP_32\F6 Install Floppy for Windows” and to diskette. Step 2: Connect the USB Floppy drive to the board and insert the diskette from previous step.
Embedded Controller CES-CV101 Step 4: Configure DVD/CD-ROM drive as the first boot device.
Embedded Controller CES-CV101 Step 6 – Boot to DVD/CD-ROM device to install OS Step 7 – Press “F6” to install AHCI driver Step 8 – Press “S” to install AHCI driver Step 9 – Choose “Intel(R) NM10 Express Chipset” Step 10 – Windows Setup will display the controller name you selected in previous step and continue to install OS when ”ENTER” pressed.
