Mini-ITX EMB-6908T EMB-6908T AMD Athlon TM 64/ Athlon 64 x2 (AM2 Socket) Processor, Mini-ITX ® Intel 82573L, Dual Gigabit Ethernet PCI-E［x1］x 2 (optional)/ PCI/ Mini PCI/ HD 5.1CH Audio EMB-6908T Manual Rev.A 1st Ed.
Mini-ITX EMB-6908T Copyright Notice This document is copyrighted, 2009. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Mini-ITX EMB-6908T Acknowledgments All other products’ name or trademarks are properties of their respective owners. CompactFlash™ is a trademark of the Compact Flash Association. AMD, the AMD Arrow logo and combinations thereof are trademarks of Advanced Micro Devices, Inc. Microsoft Windows® is a registered trademark of Microsoft Corp. Please be notified that all other products’ name or trademarks not be mentioned above are properties of their respective owners.
Mini-ITX EMB-6908T Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 1701400453 IDE Cable 1 1709070500 Serial ATA Cable 1 1702150150 Serial ATA Power Cable 1 9657666600 Jumper Cap 1 M206908T00 I/O Shield, DVI + VGA Type 1 Quick Installation Guide 1 Utility DVD 1 EMB-6908T If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Mini-ITX EMB-6908T Contents Chapter 1 General Information 1.1 Introduction ................................................................... 1-2 1.2 Features........................................................................ 1-3 1.3 Specifications................................................................ 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ...................................................... 2-2 2.2 Location of Connectors and Jumpers .........................
Mini-ITX EMB-6908T 2.18 1st USB Connector/ 10/100/1000Base-TX Ethernet Connector (1) (CN7) ......................................................... 2-14 2.19 Audio Speak Out Connector (CN9) .......................... 2-15 2.20 Internal Keyboard Connector (CN10) ....................... 2-15 2.21 CD-IN Connector (CN11) ........................................ 2-15 2.22 LVDS-LCD Connector (CN12).................................. 2-15 2.23 LCD Inverter Connector (CN13) ............................... 2-16 2.
Mini-ITX EMB-6908T 2.42 Fan2 Connector (CN35) ........................................... 2-23 2.43 LPT Port Connector (CN36) ..................................... 2-23 2.44 Digital I/O Connector (CN37, CN38)......................... 2-24 Chapter 3 Award BIOS Setup 3.1 System Test and Initialization. ...................................... 3-2 3.2 Award BIOS Setup........................................................ 3-3 Chapter 4 Driver Installation 4.1 Installation................................
Mini-ITX EMB-6908T Chapter 1 General Information Chapter 1 General Information 1- 1
Mini-ITX EMB-6908T 1.1 Introduction The EMB-6908T adopts the latest AMD Athlon (AM2 Socket) processor and AMD M690T+ SB600 chipset for a lower power consumption and higher performance solution. EMB-6908T utilizes two DDRII 240-pin DIMM system memory that supports ECC dual-channel DDRII 533/667 up to 4GB.
Mini-ITX EMB-6908T 1.2 Features AMD Athlon 64/ Athlon 64 x2 (AM2 Socket) Processors AMD 690E + SB600 ECC Dual-channel DDRII 533/667 Memory, Up To 4GB Gigabit Ethernet x 2 CRT, Up to 24-bit Dual-channel LVDS LCD, DVI HD 5.1CH Audio EIDE x 1, SATA x 4 COM x 6, USB2.0 x 10, 16-bit Digital I/O PCI x 1, Mini PCI x 1, PCI-E [x1] x 2 in PCI-E [x4] Slot (Through Riser Card) TPM 1.
Mini-ITX EMB-6908T 1.
Mini-ITX (Typical) EMB-6908T 1GB; 3.19A @ +12V, 2.78A @ +5V Board Size 6.7”(L) x 6.7”(W) (170 mm x 170 mm) Gross Weight 1.32lb (0.
Mini-ITX EMB-6908T 1600 @ 60Hz with pixel clock 268MHz LCD Interface Up to 24-bit dual-channel LVDS Side Port 1 x 16-bit memory interface, supports up to 128MB DDRII 800 memory (TF-EMB-6908T-A12-01 only) I/O Storage EIDE x 1 (one device), SATA x 4 Serial Port RS-232 x 5, RS-232/422/485 x 1 Parallel Port SPP/ EPP/ ECP mode USB USB2.0 x 10 PS/2 Port Keyboard x 1, Mouse x 1 Digital I/O Supports 16-bit (Programmable) IrDA One IrDA Tx/Rx header Audio 5.
Mini-ITX EMB-6908T Chapter 2 Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters and further installation instructions, please refer to the user manual CD-ROM that came with the product. Part No.
Mini-ITX EMB-6908T 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
Mini-ITX EMB-6908T 2.
Mini-ITX EMB-6908T Locating Connectors and Jumpers (Solder Side) Chapter 2 Quick Installation Guide 2 - 4
Mini-ITX EMB-6908T 2.
Mini-ITX Solder Side Chapter 2 Quick Installation Guide 2 - 6 EMB-6908T
Mini-ITX EMB-6908T 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
Mini-ITX EMB-6908T 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each of the board's connectors: Connectors Label Function CN1 CRT / DVI Connector CN2 COM1 RS-232 & COM2 RS-232/422/485 Serial Port Connector CN3 Audio Connector CN4 PS/2 Keyboard / Mouse Connector CN5 Audio 5.
Mini-ITX EMB-6908T CN18 DDRII DIMM Slot CN19 DDRII DIMM Slot CN20 4th Serial ATA Connector CN21 2nd Serial ATA Connector CN22 External RTC Connector CN23 ATX Power Connector CN25 1st Serial ATA Connector CN26 PCI-Express Slot CN27 5th USB Connector CN28 4th USB Connector CN29 2nd USB Connector CN30 COM6 RS-232 Serial Port Connector CN31 COM5 RS-232 Serial Port Connector CN32 COM3 RS-232 Serial Port Connector CN33 COM4 RS-232 Serial Port Connector CN34 IrDA Connector CN35 F
Mini-ITX EMB-6908T 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
Mini-ITX EMB-6908T 2.7 COM2 Ring/+5V/+12V Selection (JP2) JP2 Function 1-2 +12V 3-4 +5V 5-6 Ring (Default) 2.8 LVDS-LCD Voltage Selection (JP3) JP3 Function 1-3 +5V 3-5 +3.3V (Default) 2.9 LCD INVERTER Voltage Selection (JP3) JP3 Function 2-4 +5V(Default) 4-6 +12V 2.10 Simulate AT Selection (JP4) JP4 Function 1-2 AT 2.11 Clear CMOS (JP5) JP5 Function 1-2 Protected (Default) 2-3 Clear 2.
Mini-ITX EMB-6908T 7 DVI_DDC_DATA 8 CRT_VSYNC 9 DVI_TD1# 10 DVI_TD1 11 GND 12 DVI_TD3# 13 DVI_TD3 14 +5V 15 GND 16 HPDET# 17 DVI_TD0# 18 DVI_TD0 19 GND 20 DVI_TD5# 21 DVI_TD5 22 GND 23 DVI_TDC 24 DVI_TDC# 25 GND 26 GND 27 GND 28 GND 29 _DDC_SCLK 30 NC 31 +5V 32 HSYNC 33 GREEN 34 GND 35 NC 36 GND 37 CRT_PLUG# 38 VSYNC 39 BLUE 40 GND 41 DDC_SDATA 42 RED 43 GND 2.
Mini-ITX EMB-6908T 15 DSR2 16 RTS2 17 CTS2 18 RI2/+5V/+12V 2.14 Audio Connector Line-IN/Line-OUT/Mic-IN (CN3) Pin Signal Pin Signal A1 LINEIN_L A2 GND A3 LINE_JD A4 LINEIN_R B1 LINEOUT_L B2 GND B3 FRONT_JD B4 LINEOUT_R C1 MIC_L C2 GND C3 MIC_JD C4 MIC_R 2.15 PS/2 Keyboard / Mouse Connector (CN4) Pin Signal Pin Signal 1 KDAT 2 NC 3 GND 4 +KB_VCC 5 KCLK 6 NC 7 MDAT 8 NC 9 GND 10 +KB_VCC 11 MCLK 12 NC 2.16 Audio 5.
Mini-ITX 13 Note: SPDIF-OUT EMB-6908T 14 SPDIF-IN For supporting Audio 7.1 CH, you have to plug CN5& CN3 synchronized. 2.
Mini-ITX EMB-6908T 21 USBD0+ 22 GND 23 +5V 24 USBD1- 25 USBD1+ 26 GND 2.19 Audio Speak Out Connector (CN9) Pin Signal Pin Signal 1 SPK_R+ 2 SPK_R- 3 SPK_L+ 4 SPK_L- 2.20 Internal Keyboard Connector (CN10) Pin Signal 1 KB_CLK 2 KB_DATA 3 NC 4 GND 5 +5V 2.21 CD-IN Connector (CN11) Pin Signal 1 CD_IN_L 2 CD_GND 3 CD_GND 4 CD_IN_R 2.
Mini-ITX EMB-6908T 9 LVDS1_TX0- 10 LVDS1_TX0+ 11 LVDS1_TX1- 12 LVDS1_TX1+ 13 LVDS1_TX2- 14 LVDS1_TX2+ 15 LVDS1_TX3- 16 LVDS1_TX3+ 17 I2C_DATA 18 I2C_CLK 19 LVDS2_TX0- 20 LVDS2_TX0+ 21 LVDS2_TX1- 22 LVDS2_TX1+ 23 LVDS2_TX2- 24 LVDS2_TX2+ 25 LVDS2_TX3- 26 LVDS2_TX3+ 27 PPVCC 28 GND 29 LVDS2_TXCLK- 30 LVDS2_TXCLK+ 2.23 LCD Inverter Connector (CN13) Pin Signal 1 +5V/+12V 2 Adjust backlight 3 GND 4 GND 5 ENBKL 2.
Mini-ITX EMB-6908T 3 IDE LED (-) 4 IDE LED (+) 5 External Buzzer (-) 6 External Buzzer (+) 7 Power LED (-) 8 Power LED (+) 9 Reset Switch (-) 10 Reset Switch (+) 2.26 Fan1 Connector (CN16) Pin Signal 1 GND 2 +12V 3 Speed Sense 4 Speed Control 2.27 3rd Serial ATA Connector (CN17) Pin Signal 1 GND 2 SATA_TX2+ 3 SATA_TX2- 4 GND 5 SATA_RX2- 6 SATA_RX2+ 7 GND 8 GND 9 GND 2.
Mini-ITX 4 GND 5 SATA_RX3- 6 SATA_RX3+ 7 GND 8 GND 9 GND EMB-6908T 2.29 2nd Serial ATA Connector (CN21) Pin Signal 1 GND 2 SATA_TX1+ 3 SATA_TX1- 4 GND 5 SATA_RX1- 6 SATA_RX1+ 7 GND 8 GND 9 GND 2.30 External RTC Connector (CN22) Pin Signal 1 +RTCBAT 2 GND 2.31 ATX Power Connector (CN23) Pin Signal 1 +3.3V 11 +3.3V 2 +3.
Mini-ITX EMB-6908T 5 GND 15 GND 6 +5V 16 GND 7 GND 17 GND 8 POWER OK 18 -5V 9 +5VSB 19 +5V 10 +12V 20 +5V 2.32 1st Serial ATA Connector (CN25) Pin Signal 1 GND 2 SATA_TX0+ 3 SATA_TX0- 4 GND 5 SATA_RX0- 6 SATA_RX0+ 7 GND 8 GND 9 GND 2.33 PCI-Express Connector (CN26) Pin Signal Pin Signal A1 GND B1 +12V A2 +12V B2 +12V A3 +12V B3 +12V A4 GND B4 GND A5 NC B5 SMCLK A6 NC B6 SMDAT A7 NC B7 GND A8 NC B8 +3.
Mini-ITX EMB-6908T A9 +3.3V B9 NC A10 +3.3V B10 +3.3V A11 PERST# B11 +3.
Mini-ITX EMB-6908T 7 GND 8 USBD9- 9 GND 10 +5V 2.35 4th USB Connector (CN28) Pin Signal Pin Signal 1 +5V 2 GND 3 USBD6- 4 GND 5 USBD6+ 6 USBD7+ 7 GND 8 USBD7- 9 GND 10 +5V 2.36 2nd USB Connector (CN29) Pin Signal Pin Signal 1 +5V 2 GND 3 USBD2- 4 GND 5 USBD2+ 6 USBD3+ 7 GND 8 USBD3- 9 GND 10 +5V 2.
Mini-ITX EMB-6908T 2.38 COM5 RS-232 Serial Port Connector (CN31) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 NC 2.39 COM3 RS-232 Serial Port Connector (CN32) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 NC 2.40 COM4 RS-232 Serial Port Connector (CN33) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 NC 2.
Mini-ITX 4 GND 5 IRTX 6 NC EMB-6908T 2.42 Fan2 Connector (CN35) Pin Signal 1 GND 2 +12V 3 Speed Sense 4 Speed Control 2.43 LPT Port Connector (CN36) Pin Signal Pin Signal 1 #STROBE 2 #AFD 3 DATA0 4 #ERROR 5 DATA1 6 #INIT 7 DATA2 8 #SLIN 9 DATA3 10 GND 11 DATA4 12 GND 13 DATA5 14 GND 15 DATA6 16 GND 17 DATA7 18 GND 19 #ACK 20 GND 21 BUSY 22 GND 23 PE 24 GND 25 SELECT 26 N.
Mini-ITX EMB-6908T 2.44 Digital I/O Connector (CN37, CN38) This connector offers 4-pair of digital I/O functions and address is set in BIOS. The default address is 2A1H.
Mini-ITX EMB-6908T 4 in / 4 out (CN38) Pin8 Pin7 Pin6 Pin5 Pin4 Pin3 Pin2 Pin1 GPI 20 GPI 21 GPI 22 GPI 23 GPO 24 GPO 25 GPO 26 GPO 27 LSB MSB 8 in (CN38) Pin8 Pin7 Pin6 Pin5 Pin4 Pin3 Pin2 Pin1 GPI 20 GPI 21 GPI 22 GPI 23 GPI 24 GPI 25 GPI 26 GPI 27 LSB MSB 8 out (CN38) Pin8 Pin7 Pin6 Pin5 Pin4 Pin3 Pin2 Pin1 GPO 20 GPO 21 GPO 22 GPO 23 GPO 24 GPO 25 GPO 26 GPO 27 LSB MSB Chapter 2 Quick Installation Guide 2 - 25
Mini-ITX EMB-6908T Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2 - 26
Mini-ITX EMB-6908T Chapter 3 Award BIOS Setup Chapter 3 Award BIOS Setup 3-1
Mini-ITX 3.1 EMB-6908T System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors.
Mini-ITX 3.2 EMB-6908T Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press immediately. This will allow you to enter Setup. Standard CMOS Features Use this menu for basic system configuration. (Date, time, IDE, etc.
Mini-ITX EMB-6908T PC Health Status This menu allows you to set the shutdown temperature for your system. Frequency/Voltage Control Use this menu to specify your settings for auto detect DIMM/PCI clock and spread spectrum. Load Fail-Safe Defaults Use this menu to load the BIOS default values for the minimal/stable performance for your system to operate. Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal performance system operations.
Mini-ITX EMB-6908T Chapter 4 Driver Installation .
Mini-ITX EMB-6908T The EMB-6908T comes with an AutoRun CD-ROM that contains all drivers and utilities that can help you to install the driver automatically. Insert the driver CD, the driver CD-title will auto start and show the installation guide. If not, please follow the sequence below to install the drivers.
Mini-ITX 4.1 EMB-6908T Installation: Insert the EMB-6908T CD-ROM into the CD-ROM drive. And install the drivers from Step 1 to Step 5 in order. Step 1 – Install Chipset Driver 1. Click on the Step 1 – Chipset Driver folder and select the OS folder your system is Note: If your system is Windows XP, please select WIN XP 32-Bit or WIN XP 64-Bit folder located in WinXP folder. After entering the WIN XP 32-Bit or WIN XP 64-Bit folder, click on the folder of Step 1-Microsoft .NET Framework 2.
Mini-ITX EMB-6908T Step 3 –Install ATI HDMI Audio Device 1. Click on the Step 3 – ATI HDMI Audio Device folder and double click on the HDMI_R168.exe file 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 4 –Install Audio Driver 1. Click on the Step 4 –Audio Driver folder and select the OS folder your system is 2. Double click on the SETUP.exe located in each OS folder 3. Follow the instructions that the window shows 4.
Mini-ITX EMB-6908T Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Mini-ITX EMB-6908T A.1 Programming EMB-6908T utilizes ITE 8712 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description After the hardware reset or power-on reset, the ITE 8712 enters the normal mode with all logical devices disabled except KBC.
Mini-ITX EMB-6908T There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited normally. (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
Mini-ITX EMB-6908T WatchDog Timer Configuration Registers Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
Mini-ITX EMB-6908T WatchDog Timer Control Register (Index=71h, Default=00h) WatchDog Timer Configuration Register (Index=72h, Default=00h) WatchDog Timer Time-out Value Register (Index=73h, Default=00h) Appendix A Programming the Watchdog Timer A-5
Mini-ITX EMB-6908T A.2 IT8712 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ; 10 Sec dec al Watch_Dog_Setting: ;Timer setting mov al, cl mov cl, 73h call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
Mini-ITX EMB-6908T ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh MOV CX,04h Init_1: MOV AL,BYTE PTR CS:[SI] OUT DX,AL INC SI LOOP Init_1 RET Enter_Configuration_Mode ENDP Exit_Configuration_Mode PROC NEAR MOV AX,0202h CALL Write_Configuration_Data Appendix A Programming the Watchdog Timer A-7
Mini-ITX EMB-6908T RET Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial Need_Initial: STC RET Not_Initial: CLC RET Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL Appendix A Programming the Watchdog Timer A-8
Mini-ITX EMB-6908T MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX RET Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL RET Write_Configuration_Data ENDP Superio_Set_Reg proc near push ax MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al ret Superio_Set_Reg endp.
Mini-ITX EMB-6908T push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax ret Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02Fh END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 . .
Mini-ITX EMB-6908T Appendix B I/O Information Appendix B I/O Information B-1
Mini-ITX B.
Mini-ITX EMB-6908T Appendix B I/O Information B-3
Mini-ITX B.
Mini-ITX EMB-6908T B.3 IRQ Mapping Chart B.
Mini-ITX EMB-6908T Appendix C Mating Connecotor Appendix C Mating Connector C - 1
Mini-ITX EMB-6908T C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Function Label CN5 Mating Connector Vendor Audio 5.
Mini-ITX CN16 Fan1 Connector Catch CN17 3rd Serial ATA Connector Catch CN20 4th Serial ATA Connector Catch CN21 2nd Serial ATA Connector Catch CN22 External RTC Connector Molex CN23 ATX Power Connector Catch CN25 1st Serial ATA Connector Catch CN27 5th USB Connector Catch CN28 4th USB Connector Catch CN29 2nd USB Connector Catch CN30 COM6 RS-232 Catch EMB-6908T 2.54mm Pitch 3 pins (Catch 1190-700-03S or compatible) 1.27mm Pitch 7 pins (Catch H16A30 00-00 or compatible) 1.
Mini-ITX CN31 CN32 CN33 CN34 Serial Port Connector COM5 RS-232 Serial Port Connector COM3 RS-232 Serial Port Connector COM4 RS-232 Serial Port Connector IrDA Connector Catch Catch Catch HOBASE CN35 Fan2 Connector Catch CN36 LPT Port Connector HR CN37 Digital I/O Connector (1) Catch CN38 Digital I/O Connector (2) Catch IDE1 IDE Connector Catch Appendix C Mating Connector C - 4 EMB-6908T H754-2x5 or compatible) 2.00mm Pitch 10 pins ( Catch H754-2x5 or compatible) 2.
