Mini-ITX EMB-9458T EMB-9458T ® Intel Core TM 2 Duo/CoreTM Duo/ Celeron® M Processor, Mini-ITX Intel ® 82573L Ethernet TPM 1.2 AC 97 Audio & Mini PCI EMB-9458T Manual Rev.A 3rd Ed.
Mini-ITX EMB-9458T Copyright Notice This document is copyrighted, 2012. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Mini-ITX EMB-9458T Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™ is a trademark of the Compact Flash Association. Intel®, CoreTM 2 Duo/ CoreTM Duo and Celeron® M are trademarks of Intel® Corporation. Microsoft Windows® is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc.
Mini-ITX EMB-9458T Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 1701400453 IDE Cable 1 9657666600 Jumper Cap 1 1709070500 Serial ATA Cable 1 1702150150 Serial ATA Power Cable 1 Quick Installation Guide 1 Utility CD 1 EMB-9458T If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Mini-ITX EMB-9458T Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................. 2-2 2.2 Location of Connectors and Jumpers ...................... 2-3 2.
Mini-ITX EMB-9458T 2.17 Internal Mouse Connector (CN10) ........................ 2-14 2.18 LVDS-LCD Connector (CN11) ............................ 2-14 2.19 SDVO Connector (CN12)...................................... 2-15 2.20 System Fan Connector (CN13) ........................... 2-16 2.21 RTC Battery Connector (CN14) ............................ 2-16 2.22 RS-232 TTL/GPS Connector (CN15).................... 2-16 2.23 ATX Power Connector (CN16).............................. 2-16 2.
Mini-ITX Appendix A EMB-9458T Programming The Watchdog Timer A.1 Programming .........................................................A-2 A.2 IT 8712 Watchdog Timer Initial Program ...............A-6 Appendix B I/O Information B.1 I/O Address Map ....................................................B-2 B.2 Memory Address Map............................................B-3 B.3 IRQ Mapping Chart ................................................B-4 B.4 DMA Channel Assignments.……………………… .
Mini-ITX EMB-9458T Chapter 1 General Information Chapter 1 General Information 1- 1
Mini-ITX EMB-9458T 1.1 Introduction The EMB-9458T adopts the latest Intel® Core™ 2 Duo / Core™ Duo/ Celeron® M processor and Intel® 945GME+ICH7M chipset for better power-management capabilities and enhanced performance. The system memory of EMB-9458T features two 240-pin DIMM and DDRII 400/533/667 up to 4GB.
Mini-ITX EMB-9458T 1.2 Features ® • Intel Core™ 2 Duo / Core™ Duo/ Celeron M Processor • DDRII 400/533/667 DIMM Memory Up to 4GB • 18/24-bit Dual-channel LVDS TFT LCD, DVI, LVDS, TV-out, SDVO x 1 for 2nd 18/24-bit Dual-channel DVI/ LVDS • Intel 82573L Gigabit Ethernet • CompactFlash™ Type II Slot, Two SATA (Optional RAID 0 & RAID 1) • Two PCI-E［x1］Slots (Optional), One PCI, and One Mini PCI Socket • Six COM Ports (RS-232 x 4, RS-232 TTL only/ GPS x 1, RS-232/422/485 x 1), Eight USB 2.
Mini-ITX EMB-9458T 1.
Mini-ITX EMB-9458T +12V) or AT (+5V, +12V) Power Consumption T7400 2.16GHz, DDRII 667 (Typical) 2 GB：2.24A@+12V, 3.6A@ +5V Board Size 6.7”(L) x 6.
Mini-ITX DVI EMB-9458T Yes, 2nd DVI through an optional SDVO card (TF-PER-V03B-A10) TPM Optional Storage EIDE x 1 (UDMA100), SATA II x I/O 2, Type II CompactFlash x 1 Serial Port RS-232 x 4, RS-232 TTL only/ GPS x1, RS-232/422/485 x 1 IrDA One IrDA Tx/Rx header Audio MIC-In, Line-In, Line-out, CD-in, Stereo amplifier included USB USB 2.
Mini-ITX EMB-9458T Chapter 2 Quick Installation Guide Chapter 2 Quick Installation Guide 2 - 1
Mini-ITX EMB-9458T 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
Mini-ITX EMB-9458T 2.
Mini-ITX Solder Side Chapter 2 Quick Installation Guide 2 - 4 EMB-9458T
Mini-ITX EMB-9458T 2.
Mini-ITX Solder Side Chapter 2 Quick Installation Guide 2 - 6 EMB-9458T
Mini-ITX EMB-9458T 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
Mini-ITX EMB-9458T 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each of the board's connectors: Label Function CN1 VGA Display Connector CN2 COM1 RS-232 & COM2 RS-232/422/485 CN3 CN4 CN5 Audio 5.
Mini-ITX EMB-9458T CN21 USB Connector CN22 Digital I/O Connector CN23 COM4 RS-232 Serial Port Connector CN24 COM3 RS-232 Serial Port Connector CN25 COM6 RS-232 Serial Port Connector CN26 IrDA Connector CN27 CPU FAN Connector CN28 Front Panel Connector CN29 CompactFlash Slot CN30 Audio Speaker Output KBMS1 PS2 Keyboard / Mouse Connector DVI1 DVI Connector AUDIO1 Audio Connector MPCI1 Mini PCI Slot PCI1 PCI Slot SATA1 Primary Serial ATA Connector SATA2 Secondary Serial ATA C
Mini-ITX EMB-9458T 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
Mini-ITX EMB-9458T 2.7 COM2 Ring/+5V/+12V Selection (JP2) JP2 Function 1-2 +12V 3-4 +5V 5-6 Ring (Default) 2.8 LCD INVERTER Voltage Selection (JP3) JP3 Function 1-2 +5V(Default) 2-3 +12V 2.9 LCD Voltage Selection (JP4) JP4 Function 1-2 +5V 2-3 +3.3V (Default) 2.10 Clear CMOS (JP5) JP5 Function 1-2 Protected (Default) 2-3 Clear 2.
Mini-ITX EMB-9458T 2.12 COM1 RS-232 & COM2 RS-232/422/485 Connector (CN2) COM1 Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.C. COM2 Pin Signal Pin Signal 1 DCD (422TXD-/485DATA-) 2 RXD (422RXD+) 3 TXD (422TXD+/485DATA+) 4 DTR (422RXD-) 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.C. 2.13 Audio 5.
Mini-ITX EMB-9458T 5 Surr-OUT-R 6 GND 7 Surr-OUT-L 8 GND 9 LFE-OUT 10 GND 11 CNE-OUT 12 GND 13 SPDIF-OUT 14 SPDIF-IN 2.14 LCD Inverter Connector (CN7) Pin Signal 1 VCC of LCD inverter (+5V/+12V) 2 Adjust backlight 3 GND 4 GND 5 ENBKL 2.15 CD-IN Connector (CN8) Pin Signal 1 CD_IN_L 2 CD_GND 3 CD_GND 4 CD_IN_R 2.16 Internal Keyboard Connector (CN9) Pin Signal 1 KB_CLK 2 KB_DATA 3 N.C.
Mini-ITX EMB-9458T 2.17 Internal Mouse Connector (CN10) Pin Signal 1 MS_CLK 2 MS_DATA 3 GND 4 +5V 2.18 LVDS-LCD Connector (CN11) Pin Signal Pin Signal 1 ENBKL 2 N.C. 3 PPVCC 4 GND 5 LVDS1_TXCLK- 6 LVDS1_TXCLK+ 7 PPVCC 8 GND 9 LVDS1_TX0- 10 LVDS1_TX0+ 11 LVDS1_TX1- 12 LVDS1_TX1+ 13 LVDS1_TX2- 14 LVDS1_TX2+ 15 N.C. 16 N.C. 17 I2C_DATA 18 I2C_CLK 19 LVDS2_TX0- 20 LVDS2_TX0+ 21 LVDS2_TX1- 22 LVDS2_TX1+ 23 LVDS2_TX2- 24 LVDS2_TX2+ 25 N.C. 26 N.C.
Mini-ITX EMB-9458T 2.19 SDVO Connector (CN12) Pin Signal Pin Signal 1 SDVO_SPC 2 SDVO_RST# 3 SDVO_SPD 4 SMBCLK 5 N.C. 6 SMBDATA 7 GND 8 GND 9 SDVO_RED# 10 SDVO_FLDSTALL# 11 SDOV_RED 12 SDVO_FLDSTALL 13 GND 14 GND 15 SDVO_BLUE# 16 SDVO_INT# 17 SDVO_BLUE 18 SDVO_INT 19 GND 20 GND 21 SDVO_GREEN# 22 SDVO_CLK# 23 SDVO_GREEN 24 SDVO_CLK 25 GND 26 GND 27 +2.5V 28 +5V 29 +2.5V 30 +5V 31 +2.5V 32 GND 33 GND 34 +12V 35 +3.3V 36 +12V 37 +3.
Mini-ITX EMB-9458T 2.20 System Fan Connector (CN13) Pin Signal 1 GND 2 VCC of FAN 3 Speed Sense 4 Speed Control 2.21 RTC Battery Connector (CN14) Pin Signal 1 Battery Power input 2 GND 2.22 RS-232 TTL/ GPS Connector (CN15) Pin Signal 1 N.C. 2 N.C. 3 GND 4 GPS_LED 5 GPS_TXD 6 GPS_RXD 7 VCC3.3_BAT 8 +3.3V 9 GPS_RST# 10 GND 2.23 ATX Power Connector (CN16) Pin Signal Pin Signal 1 N.C. 11 N.C.
Mini-ITX EMB-9458T 2 N.C. 12 -12V 3 GND 13 GND 4 +5V 14 PS_ON 5 GND 15 GND 6 +5V 16 GND 7 GND 17 GND 8 POWER OK 18 -5V 9 +5VSB 19 +5V 10 +12V 20 +5V 2.24 LPT Port Connector (CN17) Pin Signal Pin Signal 1 STROBE 2 AFD 3 PTD0 4 ERROR 5 PTD1 6 INIT 7 PTD2 8 SLIN 9 PTD3 10 GND 11 PTD4 12 GND 13 PTD5 14 GND 15 PTD6 16 GND 17 PTD7 18 GND 19 ACK 20 GND 21 BUSY 22 GND 23 PE 24 GND 25 SELECT 26 N.C.
Mini-ITX EMB-9458T 2.25 AT Power Connector (CN18) Pin Signal 1 N.C. 2 +5V 3 +12V 4 -12V 5 GND 6 GND 7 GND 8 GND 9 -5V 10 +5V 11 +5V 12 +5V 2.26 PCI-Express Slot (CN19) Pin Signal Pin Signal A1 NC B1 +12V A2 +12V B2 +12V A3 +12V B3 +12V A4 GND B4 GND A5 NC B5 SMBCLK A6 NC B6 SMBDAT A7 NC B7 GND A8 NC B8 +3.3V A9 +3.3V B9 NC A10 +3.3V B10 +3.
Mini-ITX EMB-9458T A11 PCIE_RESET# B11 PCIE_WAKE# A12 GND B12 NC A13 PCIE1_CLKP B13 GND A14 PCIE1_CLKN B14 PCIE1_TXP A15 GND B15 PCIE1_TXN A16 PCIE1_RXP B16 GND A17 PCIE1_RXN B17 NC A18 GND B18 GND A19 NC B19 PCIE2_TXP A20 GND B20 PCIE2_TXN A21 PCIE2_RXP B21 GND A22 PCIE2_RXN B22 GND A23 GND B23 PCIE3_TXP A24 GND B24 PCIE3_TXN A25 PCIE3_RXP B25 GND A26 PCIE3_RXN B26 GND A27 GND B27 PCIE4_TXP A28 GND B28 PCIE4_TXN A29 PCIE4_RXP B29
Mini-ITX EMB-9458T 3 USBD1- 4 GND 5 USBD1+ 6 USBD2+ 7 GND 8 USBD2- 9 GND 10 +5V 2.28 Digital I/O Connector (CN22) This connector offers 4-pair of digital I/O functions and address is 2A1H.
Mini-ITX EMB-9458T 8 out Pin1 GPO 27 MSB Pin2 GPO 26 Pin3 GPO 25 Pin4 GPO 24 Pin5 GPO 23 Pin6 GPO 22 Pin7 GPO 21 Pin8 GPO 20 LSB 2.29 COM4 RS-232 Serial Port Connector (CN23) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.C. 2.30 COM3 RS-232 Serial Port Connector (CN24) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.C. 2.
Mini-ITX EMB-9458T 7 RTS 8 CTS 9 RI 10 N.C. 2.32 IrDA Connector (CN26) Pin Signal 1 +5V 2 N.C. 3 IRRX 4 GND 5 IRTX 6 N.C. 2.33 CPU FAN Connector (CN27) Pin Signal 1 GND 2 VCC of FAN 3 Speed Sense 4 Speed Control 2.
Mini-ITX EMB-9458T 2.
Mini-ITX EMB-9458T Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2 - 24
Mini-ITX EMB-9458T Chapter 3 Award BIOS Setup Chapter 3 Award BIOS Setup 3-1
Mini-ITX 3.1 EMB-9458T System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors.
Mini-ITX 3.2 EMB-9458T Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press immediately. This will allow you to enter Setup. Standard CMOS Features Use this menu for basic system configuration. (Date, time, IDE, etc.
Mini-ITX EMB-9458T Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system performance. Integrated Peripherals Use this menu to specify your settings for integrated peripherals. (Primary slave, secondary slave, keyboard, mouse etc.) Power Management Setup Use this menu to specify your settings for power management. (HDD power down, power on by ring, KB wake up, etc.) PnP/PCI Configurations This entry appears if your system supports PnP/PCI.
Mini-ITX EMB-9458T Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal performance system operations. While AWARD has designated the custom BIOS to maximize performance, the factory has the right to change these defaults to meet their needs. Set Supervisor/User Password Use this menu to set Supervisor/User Passwords. Save and Exit Setup Save CMOS value changes to CMOS and exit setup.
Mini-ITX EMB-9458T LVDS (24-bit) has the following limitation. In Microsoft windows dual independent display mode (extended desktop), LVDS channel used as secondary(extended) screen cannot full screen at resolution of 1366x768 and 1600x1200. Other resolutions are ok. 5. You can refer to the “ AAEON BIOS Item Description.pdf” file in the CD for the meaning of each setting in this chapter.
Mini-ITX EMB-9458T Chapter 4 Driver Installation Chapter 4 Driver Installation 4-1
Mini-ITX EMB-9458T The EMB-9458T comes with an AutoRun CD-ROM that contains all drivers and utilities that can help you to install the driver automatically. Insert the driver CD, the driver CD-title will auto start and show the installation guide. If not, please follow the sequence below to install the drivers.
Mini-ITX EMB-9458T 4.1 Installation: Insert the EMB-9458T CD-ROM into the CD-ROM drive. And install the drivers from Step 1 to Step 4 in order. Step 1 – Install INF Driver 1. Click on the Step 1-inf folder and then double click on the setup.exe 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 2 – Install VGA Driver 1. Click on the Step 2-vga folder and choose the folder your system is 2. Double click on .
Mini-ITX EMB-9458T Step 4 – Install Audio Driver 1. Click on the Step 4- AC97 folder and choose the folder your system is 2. Double click on .exe file located in each OS folder 3. Follow the instructions that the window shows 4.
Mini-ITX EMB-9458T Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Mini-ITX EMB-9458T A.1 Programming EMB-9458T utilizes ITE 8712 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description After the hardware reset or power-on reset, the ITE 8712 enters the normal mode with all logical devices disabled except KBC.
Mini-ITX EMB-9458T There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited normally. (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
Mini-ITX EMB-9458T WatchDog Timer Configuration Registers Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
Mini-ITX EMB-9458T WatchDog Timer Configuration Register (Index=72h, Default=00h) WatchDog Timer Time-out Value Register (Index=73h, Default=00h) Appendix A Programming the Watchdog Timer A-5
Mini-ITX EMB-9458T A.2 IT8712 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ; 10 Sec dec al Watch_Dog_Setting: ;Timer setting mov al, cl mov cl, 73h call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
Mini-ITX EMB-9458T ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh MOV CX,04h Init_1: MOV AL,BYTE PTR CS:[SI] OUT DX,AL INC SI LOOP Init_1 RET Enter_Configuration_Mode ENDP Exit_Configuration_Mode PROC NEAR MOV AX,0202h CALL Write_Configuration_Data Appendix A Programming the Watchdog Timer A-7
Mini-ITX EMB-9458T RET Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial Need_Initial: STC RET Not_Initial: CLC RET Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL Appendix A Programming the Watchdog Timer A-8
Mini-ITX EMB-9458T MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX RET Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL RET Write_Configuration_Data ENDP Superio_Set_Reg proc near push ax MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al ret Superio_Set_Reg endp.
Mini-ITX EMB-9458T push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax ret Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02Fh END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 . .
Mini-ITX EMB-9458T Appendix B I/O Information Appendix B I/O Information B-1
Mini-ITX EMB-9458T B.
Mini-ITX EMB-9458T B.
Mini-ITX EMB-9458T B.3 IRQ Mapping Chart B.
Mini-ITX EMB-9458T Appendix C Mating Connecotor Appendix C Mating Connector C - 1
Mini-ITX EMB-9458T C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Mating Connector Function Label Vendor Model no Available Cable P/N Cable 2.00mm Pitch 14 pins (Catch H709-2 or compatible) 2.00mm Pitch 8 pins (Catch H754-2x4 or compatible) 2.0mm Pitch 5 pins (HO-BASE 2002-H-5 or compatible) Audio Cable 1700140164 TV-Out Cable 1700080180 NA NA HOBASE 2.
Mini-ITX CN12 SDVO WELLLIN CN13 Fan Catch CN14 RTC Battery Molex CN15 GPS Catch CN16 ATX Power Socket Catch CN17 Parallel Port HR CN20 USB Port Catch CN21 USB Port Catch CN22 Digital I/O Catch CN23 RS-232 Serial Port Catch CN24 RS-232 Serial Port Catch EMB-9458T 1.0mm Pitch 40 pins(WELL-LIN WL1010H-2*20 P or compatible) 2.54mm Pitch 3 pins (Catch 1190-700-03S or compatible) 1.25mm Pitch 2 pins (Molex 51021-0200 or compatible) 1.0mm Pitch 10 pins (Catch HS-10P-1.
Mini-ITX CN25 RS-232 Serial Port Catch CN26 IrDA HOBASE CN27 Fan Catch CN28 Front Panel HOBASE CN30 Speaker Output IDE1 EIDE Connector EMB-9458T H754-2x5 or compatible) 2.00mm Pitch 10 pins ( Catch H754-2x5 or compatible) 2.0mm Pitch 6 pins (HO-BASE 2000-1H-6 or compatible) Serial Port Cable 1701100206 NA NA 2.54mm Pitch 3 pins (Catch 1190-700-03S or compatible) 2.54mm Pitch 10 pins (HO-BASE 2541-2H-2X5 or compatible) NA NA NA NA HOBASE 2.
