Mini-ITX EMB-9658T EMB-9658T ® Intel CoreTM 2 Duo/ Celeron® M Processor, Mini-ITX Intel ® 82573L, 82566MM Ethernet TPM 1.2 VIA VT1708B Audio & Mini PCI EMB-9658T Manual Rev.A 3rd Ed.
Mini-ITX EMB-9658T Copyright Notice This document is copyrighted, 2012. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Mini-ITX EMB-9658T Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™ is a trademark of the Compact Flash Association. Intel®, CoreTM 2 Duo and Celeron® M are trademarks of Intel® Corporation. Microsoft Windows® is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc.
Mini-ITX EMB-9658T Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 1709070500 SATA Cable 1 1702151200 Onboard SATA Power Cable 1 M206908T00 Metal I/O Bracket 1 Product CD for manual (in PDF format) and drivers 1 EMB-9658T If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Mini-ITX EMB-9658T Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................. 2-2 2.2 Location of Connectors and Jumpers ...................... 2-3 2.
Mini-ITX EMB-9658T 2.18 USB Connector/10/100/1000 Base-Tx Ethernet Connector(1) (CN5)....................................................... 2-14 2.19 USB Connector/10/100/1000 Base-Tx Ethernet Connector(2) (CN6)....................................................... 2-15 2.20 LCD Inverter Connector (CN8) .......................... 2-15 2.21 CD-IN Connector (CN9) ........................................ 2-16 2.22 Internal Keyboard Connector (CN10).................... 2-16 2.
Mini-ITX EMB-9658T 2.41 CompactFlash™ Connector (CN31) ..................... 2-23 2.42 ATX Power Connector(CN32)............................... 2-24 2.43 SATA Power Connector (CN33) ........................... 2-24 Chapter 3 Award BIOS Setup 3.1 System Test and Initialization. .................................. 3-2 3.2 Award BIOS Setup .................................................... 3-3 Chapter 4 Driver Installation 4.1 Installation……………………………………………..
Mini-ITX EMB-9658T Chapter 1 General Information Chapter 1 General Information 1- 1
Mini-ITX EMB-9658T 1.1 Introduction ® The EMB-9658T adopts the latest Intel Core™ 2 Duo/ ® ® Celeron M (Socket-P based) processors and Intel GME965 +ICH8M chipset for better power-management capabilities and enhanced performance. The system memory of EMB-9658T features two 200-pin DIMM and DDR2 533/667 up to 4GB. The LCD interface is 18/ 24-bit dual-channel LVDS share memory up to 384 MB with DVMT 4.0.
Mini-ITX EMB-9658T 1.2 Features ® ® Intel Core™ 2 Duo/ Celeron M (Socket-P Based) Processors ® Intel GME965 + ICH8M (-E Optional for RAID) DDR2 533/667 Memory, Max. 4GB Gigabit Ethernet x 2, with one 82566MM support iAMT 2.5 18/24 bit Dual-Channel LVDS, DVI/CRT, SDVO Connector for 2nd 18/24 bit Dual-Channel LVDS/DVI HD 5.1CH Audio SATA 3.0 Gb/s x 2, EIDE x 1, CompactFlash™ USB2.
Mini-ITX EMB-9658T 1.3 Specifications System Form Factor Mini-ITX Processor Intel Core™ 2 Duo/ ® ® Celeron M (Socket-P based) Processors System Memory 200-pin DDR2 SODIMM x 2, Max. 4GB (DDR2 533/667) Chipset ® Intel GME965 + ICH8M(-E optional for RAID) I/O Chipset ITE8712 Ethernet Intel 82566MM/82573L for ® 10/100/1000Base-TX, RJ-45 x 2 BIOS Award Plug & Play SPI BIOS – 2MB ROM Wake on LAN Yes Watchdog Timer ITE.
Mini-ITX EMB-9658T Battery Lithium battery Power Requirement ATX Board Size 6.7" (L) x 6.7" (W) (170mm x 170mm) Gross Weight 1.1lb (0.5kg) Operating Temp. 32°F ~ 140°F (0°C ~ 60°C) Storage Temp. -40°F ~ 176°F (-40°C ~ 80°C) Operating Humidity 0% ~ 90% relative humidity, non-condensing Display: Supports LCD/CRT, LCD/DVI, CRT/DVI, Dual Simultaneous/ Dual View Displays ® Chipset Intel GME965 integrated Memory Shared system memory up to 384 MB/DVMT4.
Mini-ITX EMB-9658T I/O Storage EIDE x 1 (shared signals with CompactFlash™) SATA 3.0 Gb/s x 2 Serial Port RS-232 x 4, RS-232/422/485 x 1, TTL x 1 Parallel Port SPP/ EPP/ ECP mode USB USB2.0 x 8 PS/2 Port Keyboard x 1, Mouse x 1 Digital I/O Support 8-bit (Programmable) IrDA One IrDA Tx/Rx header Audio HD 5.
Mini-ITX EMB-9658T Chapter 2 Quick Installation Guide Chapter 2 Quick Installation Guide 2 - 1
Mini-ITX EMB-9658T 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
Mini-ITX EMB-9658T 2.
Mini-ITX EMB-9658T Locating Connectors and Jumpers (Solder Side) Chapter 2 Quick Installation Guide 2 - 4
Mini-ITX EMB-9658T 2.
Mini-ITX Solder Side Chapter 2 Quick Installation Guide 2 - 6 EMB-9658T
Mini-ITX EMB-9658T 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
Mini-ITX EMB-9658T 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each of the board's connectors: Label Function CN1 DVI Connector /VGA Display Connector CN2 Audio Speaker Output CN3 COM1 RS-232 & COM2 RS-232/422/485 CN4 Audio 5.
Mini-ITX EMB-9658T CN23 USB Connector CN24 Digital I/O Connector CN25 COM4 RS-232 Serial Port Connector CN26 COM3 RS-232 Serial Port Connector CN27 COM6 RS-232 Serial Port Connector CN28 IrDA Connector CN29 CPU FAN Connector CN30 Front Panel Connector CN31 CompactFlash™ Slot CN32 ATX Power Connector CN33 SATA Power connector KBMS1 PS2 Keyboard / Mouse Connector AUDIO1 Audio Connector MPCI1 Mini PCI Slot PCI1 PCI Slot SATA1 Primary Serial ATA Connector SATA2 Secondary Seria
Mini-ITX EMB-9658T 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
Mini-ITX EMB-9658T 2.7 LCD INVERTER Voltage Selection (JP1) JP1 Function 1-2 +5V (Default) 2-3 +12V 2.8 COM2 Ring/+5V/+12V Selection (JP2) JP2 Function 1-2 +12V 3-4 +5V 5-6 Ring (Default) 2.9 LCD Voltage Selection (JP3) JP3 Function 1-2 +5V 2-3 +3.3V (Default) 2.10 Auto Power Button (JP4) JP4 Function 1-2 Auto power button 2-3 Not use auto power button (Default) 2.
Mini-ITX EMB-9658T 2.12 ATX Power Simulate AT Power (JP6) JP6 Function NC ATX or AT standard (Default) 1-2 ATX Power Simulate AT Power 2.13 Connector Pin Assignment 2.14 DVI+CRT Connector (CN1) Pin Signal Pin 1 DVI_TX2- 2 DVI_TX2+ 3 GND 4 N.C 5 N.C 6 SM_CLK 7 SM_DAT 8 VSYNC 9 DVI_TX1- 10 DVI_TX1+ 11 GND 12 N.C 13 N.C 14 +5V 15 GND 16 HPDET 17 DVI_TX0- 18 DVI_TX0+ 19 GND 20 N.C 21 N.
Mini-ITX EMB-9658T 27 N.C 28 N.C C1 RED C2 GREEN C3 BLUE C4 HSYNC C5 GND C6 GND 29 DDCCLK 30 N.C 31 +5V 32 HSYNC 33 GREEN 34 GND 35 N.C 36 GND 37 GND 38 VSYNC 39 BLUE 40 GND 41 DDCDAT 42 RED 43 GND 2.15 Audio Speaker Output (CN2) Pin Signal 1 SPK-R+ 2 SPK-R- 3 SPK-L+ 4 SPK-L- 2.
Mini-ITX EMB-9658T 5 GND 6 DSR1 7 RTS1 8 CTS1 9 RI1 10 DCD2(422TXD-/485DATA-) 11 RXD2(422RXD+) 12 TXD2(422TXD+/485DATA+) 13 DTR2(422RXD-) 14 GND 15 DSR2 16 RTS2 17 CTS2 18 RI2/+5V/+12V 2.17 Audio 5.1 Channel / SPDIF Connector (CN4) Pin Signal Pin Signal 1 Front-OUT-R 2 GND 3 Front-OUT-L 4 GND 5 Surr-OUT-R 6 GND 7 Surr-OUT-L 8 GND 9 LFE-OUT 10 GND 11 CNE-OUT 12 GND 13 SPDIF-OUT 14 SPDIF-IN 2.
Mini-ITX EMB-9658T 21 USBD2+ 22 GND 23 +5V 24 USBD3- 25 USBD3+ 26 GND 2.19 USB Connector/10/100/1000 Base-TX Ethernet Connector (2) (CN6) Pin Signal Pin Signal 1 LAN1_TCT 2 LAN1_MDI0+ 3 LAN1_MDI0- 4 LAN1_MDI1+ 5 LAN1_MDI1- 6 LAN1_MDI2+ 7 LAN1_MDI2- 8 LAN1_MDI3+ 9 LAN1_MDI3- 10 LAN1_RCT 11 LAN1_Active- 12 LAN1_Active+ 13 LAN1_S100LED 14 LAN1_S1000LED 19 +5V 20 USBD0- 21 USBD0+ 22 GND 23 +5V 24 USBD1- 25 USBD1+ 26 GND 2.
Mini-ITX EMB-9658T 2.21 CD-IN Connector (CN9) Pin Signal 1 CD_IN_L 2 CD_GND 3 CD_GND 4 CD_IN_R 2.22 Internal Keyboard Connector (CN10) Pin Signal 1 KB_CLK 2 KB_DATA 3 N.C. 4 GND 5 +5V 2.23 Internal Mouse Connector (CN11) Pin Signal 1 MS_CLK 2 MS_DATA 3 GND 4 +5V 2.24 LVDS-LCD Connector (CN12) Pin Signal Pin Signal 1 ENBKL 2 N.
Mini-ITX EMB-9658T 9 LVDS1_TX0- 10 LVDS1_TX0+ 11 LVDS1_TX1- 12 LVDS1_TX1+ 13 LVDS1_TX2- 14 LVDS1_TX2+ 15 NC 16 NC 17 I2C_DATA 18 I2C_CLK 19 LVDS2_TX0- 20 LVDS2_TX0+ 21 LVDS2_TX1- 22 LVDS2_TX1+ 23 LVDS2_TX2- 24 LVDS2_TX2+ 25 NC 26 NC 27 PPVCC 28 GND 29 LVDS2_TXCLK- 30 LVDS2_TXCLK+ 2.
Mini-ITX EMB-9658T 33 GND 34 +12V 35 +3.3V 36 +12V 37 +3.3V 38 GND 39 GND 40 GND 2.26 System Fan Connector (CN14) Pin Signal 1 GND 2 VCC of FAN 3 Speed Sense 4 Speed Control 2.27 RTC Battery Connector (CN16) Pin Signal 1 Battery Power input 2 GND 2.28 GPS Connector (CN17) Pin Signal 1 NC 2 NC 3 GND 4 GPS_LED 5 GPS_TXD 6 GPS_RXD 7 VCC3.3_BAT 8 +3.
Mini-ITX EMB-9658T 2.
Mini-ITX EMB-9658T 2.31 PCI Express Slot (CN21) Pin Signal Pin Signal A1 NC B1 +12V A2 +12V B2 +12V A3 A4 A5 +12V GND NC B3 B4 B5 +12V GND SMBCLK A6 NC B6 SMBDAT A7 NC B7 GND A8 NC B8 +3.3V A9 +3.3V B9 NC A10 +3.3V B10 +3.
Mini-ITX EMB-9658T A28 GND B28 PCIE4_TXN A29 PCIE4_RXP B29 GND A30 PCIE4_RXN B30 PCIE2_CLKN A31 GND B31 NC A32 PCIE2_CLKP B32 GND 2.32 USB Connector (CN22) Pin Signal Pin Signal 1 +5V 2 GND 3 USBD6- 4 GND 5 7 9 USBD6+ GND GND 6 8 10 USBD7+ USBD7+5V 2.33 USB Connector(CN23) Pin Signal Pin Signal 1 +5V 2 GND 3 USBD4- 4 GND 5 7 9 USBD4+ GND GND 6 8 10 USBD5+ USBD5+5V 2.
Mini-ITX EMB-9658T 2.35 COM4 RS-232 Serial Port Connector (CN25) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.C. 2.36 COM3 RS-232 Serial Port Connector (CN26) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.C. 2.37 COM6 RS-232 Serial Port Connector (CN27) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.C. 2.
Mini-ITX 3 IRRX 4 GND 5 IRTX 6 N.C. EMB-9658T 2.39 CPU Fan Connector (CN29) Pin Signal 1 GND 2 VCC of FAN 3 Speed Sense 4 Speed Control 2.40 Front Panel Connector (CN30) Pin Signal Pin Signal 1 Power On Button (-) 2 Power On Button (+) 3 IDE LED (-) 4 IDE LED (+) 5 External Buzzer (-) 6 External Buzzer (+) 7 Power LED (-) 8 Power LED (+) 9 Reset Switch (-) 10 Reset Switch (+) 2.
Mini-ITX EMB-9658T 8 N/C 33 GND 9 GND 34 IOR# 10 N/C 35 IOW# 11 N/C 36 VCC 12 N/C 37 IRQ14 13 VCC 38 VCC 14 N/C 39 MASTER 15 N/C 40 N/C 16 N/C 41 RESET# 17 N/C 42 IORDY 18 A2 43 DMAREQ 19 A1 44 DAMACK 20 A0 45 ACTIVE# 21 D0 46 PDIAG# 22 D1 47 D8 23 D2 48 D9O 24 N/C 49 D10 25 GND 50 GND 2.42 ATX Power Connector (CN32) Pin Signal 1 GND 2 GND 3 +12V 4 +12V 2.
Mini-ITX 2 GND 3 GND 4 +5V EMB-9658T Chapter 2 Quick Installation Guide 2 - 25
Mini-ITX EMB-9658T Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2 - 26
Mini-ITX EMB-9658T Chapter 3 Award BIOS Setup Chapter 3 Award BIOS Setup 3-1
Mini-ITX 3.1 EMB-9658T System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors.
Mini-ITX 3.2 EMB-9658T Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press immediately. This will allow you to enter Setup. Standard CMOS Features Use this menu for basic system configuration. (Date, time, IDE, etc.
Mini-ITX EMB-9658T Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system performance. Integrated Peripherals Use this menu to specify your settings for integrated peripherals. (Primary slave, secondary slave, keyboard, mouse etc.) Power Management Setup Use this menu to specify your settings for power management. (HDD power down, power on by ring, KB wake up, etc.) PnP/PCI Configurations This entry appears if your system supports PnP/PCI.
Mini-ITX EMB-9658T Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal performance system operations. While AWARD has designated the custom BIOS to maximize performance, the factory has the right to change these defaults to meet their needs. Set Supervisor/User Password Use this menu to set Supervisor/User Passwords. Save and Exit Setup Save CMOS value changes to CMOS and exit setup.
Mini-ITX EMB-9658T Chapter 4 Driver Installation Chapter 4 Driver Installation 4-1
Mini-ITX EMB-9658T The EMB-9658T comes with an AutoRun CD-ROM that contains all drivers and utilities that can help you to install the driver automatically. Insert the driver CD, the driver CD-title will auto start and show the installation guide. If not, please follow the sequence below to install the drivers.
Mini-ITX EMB-9658T 4.1 Installation: Insert the EMB-9658T CD-ROM into the CD-ROM drive. And install the drivers from Step 1 to Step 5 in order. Step 1 – Install chip Driver 1. Click on the Step 1-chip folder and then double click on the infinst_autol.exe 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 2 – Install vga Driver 1. Click on the Step 2-vga folder and choose the folder your system is 2. Double click on .
Mini-ITX EMB-9658T Step 4 – Install Audio Driver 1. Click on the Step 4- Audio Driver folder and select the OS you are currently using, then double click on the SETUP.exe 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 5 – Install TPM DRIVER 1. Click on the Step 5-TPM DRIVER folder and then double click on the setup.exe 2. Follow the instructions that the windows shows 3.
Mini-ITX EMB-9658T Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Mini-ITX EMB-9658T A.1 Programming EMB-9658T utilizes ITE 8712 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description After the hardware reset or power-on reset, the ITE 8712 enters the normal mode with all logical devices disabled except KBC.
Mini-ITX EMB-9658T There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited normally. (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
Mini-ITX EMB-9658T WatchDog Timer Configuration Registers Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
Mini-ITX EMB-9658T WatchDog Timer Configuration Register (Index=72h, Default=00h) WatchDog Timer Time-out Value Register (Index=73h, Default=00h) Appendix A Programming the Watchdog Timer A-5
Mini-ITX EMB-9658T A.2 IT8712 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ; 10 Sec dec al Watch_Dog_Setting: ;Timer setting mov al, cl mov cl, 73h call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
Mini-ITX EMB-9658T ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh MOV CX,04h Init_1: MOV AL,BYTE PTR CS:[SI] OUT DX,AL INC SI LOOP Init_1 RET Enter_Configuration_Mode ENDP Exit_Configuration_Mode PROC NEAR MOV AX,0202h CALL Write_Configuration_Data Appendix A Programming the Watchdog Timer A-7
Mini-ITX EMB-9658T RET Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial Need_Initial: STC RET Not_Initial: CLC RET Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL Appendix A Programming the Watchdog Timer A-8
Mini-ITX EMB-9658T MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX RET Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL RET Write_Configuration_Data ENDP Superio_Set_Reg proc near push ax MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al ret Superio_Set_Reg endp.
Mini-ITX EMB-9658T push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax ret Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02Fh END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 . .
Mini-ITX EMB-9658T Appendix B I/O Information Appendix B I/O Information B-1
Mini-ITX B.
Mini-ITX EMB-9658T Appendix B I/O Information B-3
Mini-ITX B.
Mini-ITX EMB-9658T B.
Mini-ITX B.
Mini-ITX EMB-9658T Appendix C Mating Connecotor Appendix C Mating Connector C - 1
Mini-ITX EMB-9658T C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Mating Connector Function Label Vendor Model no Available Cable P/N Cable CN2 Speaker Output Catch 2.5mm Pitch 4 pins (Catch 1191-700-04S or compatible) NA NA CN4 Audio 5.1 Channel/ SPDIF Catch Audio Cable 1700140164 CN8 LCD Inverter Catch 2.00mm Pitch 14 pins (Catch 1147-000-14S or compatible) 2.0mm Pitch 5pins(Catch.
Mini-ITX EMB-9658T CN12 LVDS LCD E-CALL 1.25mm Pitch 30 Pins(E-call.011 0-01-553-300 or compatible) NA NA CN13 SDVO Catch 1.0mm Pitch 40 pins(Catch.120 4-710-40SM or compatible) CN14 Fan Catch 2.54mm Pitch 3 pins (Catch 1190-700-042 or compatible) 1.25mm Pitch 2 pins (Catch.1201-70 0-02S or compatible) NA NA CN16 RTC Battery Catch NA NA CN17 GPS Catch 1.0mm Pitch 10 pins (Catch 1204-700-10S MR or compatible) NA NA CN18 ATX Power Socket Catch 3.
Mini-ITX EMB-9658T CN23 USB Port Catch 2.00mm Pitch 10 pins (Catch.1147-00 0-10MSP or compatible) USB Cable 1709100201 CN24 Digital I/O Catch 2.00mm Pitch 10 pins(Catch.114 7-000-10MSP or compatible) NA NA CN25 RS-232 Serial Port Catch 2.00mm Pitch 10 pins (Catch.1147-00 0-10MP or compatible) Serial Port Cable 1701100206 CN26 RS-232 Serial Port Catch 2.00mm Pitch 10 pins(Catch.114 7-000-10MP or compatible) Serial Port Cable 1701100206 CN27 RS-232 Serial Port Catch 2.
Mini-ITX EMB-9658T CN30 Front Panel JIH VEI 2.54mm Pitch 10 pins (JIH VEI.21N2256410S10B-01G-6/ 3 or compatible) NA NA CN32 ATX Power Socket Catch NA NA CN33 SATA Power connector HOBASE 3.5mm Pitch 4Pins (Catch 1121-700-04S or compatible) 2.5mm Pitch 4Pins HOBASE P201-04 or compatible) NA NA IDE1 EIDE Connector Astron 2.54mm Pitch 40pins (Astron.
