EPIC Board EPIC-QM57 EPIC-QM57 ® Intel Core™ i5/i7 Processor Supports DDR3 800/1066 Memory 24-bit Dual-channel LVDS LCD 6 USB 2.0 / 4 COMs / 2 SATA CompactFlash™/ 8-bit Digital I/O EPIC-QM57 Manual Rev. A 5th Ed.
EPIC Board EPIC-QM57 Copyright Notice This document is copyrighted, 2014. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
EPIC Board EPIC-QM57 Acknowledgments All other products’ name or trademarks are properties of their respective owners. z Award is a trademark of Award Software International, Inc. z CompactFlash™ is a trademark of the Compact Flash Association. z Intel®, Core™ i5/i7 are trademarks of Intel® Corporation. z Microsoft Windows is a registered trademark of Microsoft Corp. z ITE is a trademark of Integrated Technology Express, Inc.
EPIC Board EPIC-QM57 Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 9657666600 • Product DVD • EPIC-QM57 Jumper Cap If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
EPIC Board EPIC-QM57 Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................... 2-2 2.2 Location of Connectors and Jumpers ....................... 2-3 2.
EPIC Board EPIC-QM57 2.18 Audio Connector (CN8)........................................... 2-14 2.19 Touch Panel Connector (CN9)................................ 2-15 2.20 RS-232 Serial Port 1 Connector (CN11) ................. 2-15 2.21 Display Port Connector (CN12)............................... 2-15 2.22 UIM Connector (CN13) ........................................... 2-16 2.23 PCI-104 Connector (CN14) ………………………….2-16 2.24 USB Connector (CN17)........................................... 2-18 2.
EPIC Board EPIC-QM57 Appendix A Programming The Watchdog Timer A.1 Programming .........................................................A-2 A.2 ITE8781 Watchdog Timer Initial Program…………A-6 Appendix B I/O Information B.1 I/O Address Map ....................................................B-2 B.2 1st MB Memory Address Map ................................B-4 B.3 IRQ Mapping Chart ................................................B-5 B.4 DMA Channel Assignments...................................
EPIC Board EPIC-QM57 Chapter 1 General Information Chapter 1 General Information 1- 1
EPIC Board EPIC-QM57 1.1 Introduction AAEON announces a brand new EPIC Board EPIC-QM57, designed to fit in diverse applications that demand for fitting in different space limitations and high performance. EPIC-QM57 accommodates onboard Intel® Core™ i5/i7 (Socket-988) Processor and features one socket for a 204-pin DDR3 800/1066 SODIMM for up to 4GB of system memory. Moreover, EPIC-QM57 adopts Intel® QM57 chipset to achieve an excellent performance.
EPIC Board EPIC-QM57 1.2 Features z Intel® Core™ i5/i7 Processor z Intel® QM57 z SODIMM DDR3 800/1066 Memory, up to 4GB, 8GB optional z Gigabit Ethernet x 2 z Up To 24-bit Dual-channel LVDS LCD z 2CH HD Audio z SATA2 x 2, Type 2 CompactFlash™ x 1 z USB2.
EPIC Board EPIC-QM57 1.
EPIC Board EPIC-QM57 (Typical) z Board Size 4.5" x 6.5" (115mm x 165mm) z Gross Weight 1.1 lb (0.
EPIC Board z Audio Chapter 1 General Information 1- 6 EPIC-QM57 Line-in, Line-out, Mic-in & CD-in
EPIC Board EPIC-QM57 Chapter 2 Quick Installation Guide Chapter 2 Quick Installation Guide 2-1
EPIC Board EPIC-QM57 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
EPIC Board EPIC-QM57 2.
EPIC Board Solder Side Chapter 2 Quick Installation Guide 2-4 EPIC-QM57
EPIC Board EPIC-QM57 2.
EPIC Board Solder Side Chapter 2 Quick Installation Guide 2-6 EPIC-QM57
EPIC Board EPIC-QM57 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
EPIC Board EPIC-QM57 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
EPIC Board EPIC-QM57 CN25 RS-232 Serial Port 4 Connector CN26 RS-232 Serial Port 3 Connector CN27 External SMBUS and PS_ON# Connector CN28 Fan Connector CN29, CN30 10/100/1000Base-TX Ethernet Connector CN34 RS-232/422/485 Serial Port 2 Connector CN35 DVI-I Connector CN36 CompactFlash™ Slot Chapter 2 Quick Installation Guide 2-9
EPIC Board EPIC-QM57 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
EPIC Board EPIC-QM57 2.7 PCI-104 I/O Voltage Selection(JP2) JP2 Function 1-2 +5V 2-3 +3.3V (Default) 2.8 LCD Function Selection (JP3) LCD Inverter/Backlight Voltage Selection (JP3-1) JP3-1 Function 1-3 +5V (Default) 3-5 +12V LVDS LCD Voltage Selection (JP3-2) JP3-2 Function 2-4 +5V 4-6 +3.3V (Default) 2.
EPIC Board EPIC-QM57 Clear CMOS (JP4-1) JP4-1 Function 1-3 Protected (Default) 3-5 Clear Clear ME ROM (JP4-2) JP4-2 Function 2-4 Protected (Default) 4-6 Clear 2.10 Touch Panel 4/5/8-wire Mode Selection (JP5) JP5 Function 1-2 (Open) 5 Wire 1-2 (Close) 4 & 8 Wire (Default) 2.11 COM2 RI/+5V/+12V Selection (JP6) JP6 Function 1-2 +12V 3-4 RI 5-6 +5V (Default) 2.12 AT/ATX Power Mode Selection (SW1) SW1 Function 1(ON), 2(OFF) ATX Power 1(OFF), 2(ON) AT Power (Default) 2.
EPIC Board EPIC-QM57 3 External Buzzer (+) 4 External Buzzer (-) 5 IDE LED (+) 6 IDE LED (-) 7 Power LED (+) 8 Power LED (-) 9 Reset Switch (+) 10 Reset Switch (-) 2.14 LCD Inverter/Backlight Connector (CN2) Pin Signal 1 +5V/+12V 2 Brightness Control 3 GND 4 GND 5 Backlight Enable Note: The max.rating of Pin 1 is 0.5A @ 12V 2.15 Dual Channel LVDS LCD Connector (CN3) Pin Signal Pin Signal 1 ENBKL 2 N.
EPIC Board EPIC-QM57 25 LVDS2_TX3- 26 LVDS2_TX3+ 27 PPVCC 28 GND 29 LVDS2_TXCLK- 30 LVDS2_TXCLK+ Note: For VLCD (pin 3, 7, 27), the max. rating of each pin is 0.5A @ 5V 2.16 +12V DC Power Input Connector (CN5) Pin Signal 1 GND 2 GND 3 +12V 4 +12V Note: Standard type is a 2 pin power connector. Note: Optional support DC 12V power connector (4 pin connector). 2.17 +5V/+12V Power Output Connector (CN7) Pin Signal 1 +12V 2 GND 3 GND 4 +5V Note: The max.
EPIC Board EPIC-QM57 5 LINE_IN_L 6 CD_IN_L 7 LINE_IN_R 8 CD_GND 9 LINE_IN_GND 10 CD_IN_R 11 LINE_OUT_L 12 LINE_OUT_R 13 LINE_OUT_GND 14 LINE_OUT_GND 2.
EPIC Board EPIC-QM57 Pin Signal Pin Signal 1 Lane0 (P) 2 GND 3 Lane0(N) 4 Lane1 (P) 5 GND 6 Lane1 (N) 7 Lane2 (P) 8 GND 9 Lane2 (N) 10 Lane3 (P) 11 GND 12 Lane3 (N) 13 Config1 (GND) 14 Config2 (GND) 15 AUX CH (P) 16 GND 17 AUX CH (N) 18 Hot Plug 19 Return PWR (GND) 20 DP_PWR 2.22 UIM Connector (CN13) Pin Signal 1 UIM_PWR 2 UIM_RST 3 UIM_CLK 4 GND 5 UIM_VPP 6 UIM_DAT 2.
EPIC Board EPIC-QM57 2.24 PCI-Express Mini Card Connector (CN19) Pin Signal Pin Signal 51 Reserved 52 +3.3Vaux 49 Reserved 50 GND 47 Reserved 48 +1.5V 45 Reserved 46 LED_WPAN# 43 GND 44 LED_WLAN# 41 +3.3Vaux 42 LED_WWAN# 39 +3.3Vaux 40 GND 37 GND 38 USB_D+ 35 GND 36 USB_D- 33 PETp0 34 GND 31 PETn0 32 SMB_DATA 29 GND 30 SMB_CLK 27 GND 28 +1.5V 25 PERp0 26 GND 23 PERn0 24 +3.
EPIC Board 1 WAKE# Chapter 2 Quick Installation Guide 2-18 EPIC-QM57 2 3.
EPIC Board EPIC-QM57 2.25 LPT Port Connector (CN20) Pin Signal Pin Signal 1 #STROBE 2 #AFD 3 DATA0 4 #ERROR 5 DATA1 6 #INIT 7 DATA2 8 #SLIN 9 DATA3 10 GND 11 DATA4 12 GND 13 DATA5 14 GND 15 DATA6 16 GND 17 DATA7 18 GND 19 #ACK 20 GND 21 BUSY 22 GND 23 PE 24 GND 25 SELECT 26 N.C 2.26 Digital I/O Connector (CN21) Pin Signal Pin Signal 1 IN1 2 IN2 3 IN3 4 IN4 5 OUT1 6 OUT2 7 OUT3 8 OUT4 9 +5V 10 GND Note: The max.
EPIC Board EPIC-QM57 Mapping Table: BIOS Connector IT8781 GPIO Address Setting Definition Setting Port 8 @A44h CN16 Pin 8 GPIO Set 5 / Bit 2 U50 Pin 9 (GPIO 52) Port 7 @A44h CN16 Pin 7 GPIO Set 5 / Bit 1 U50 Pin 10 (GPIO 51) Port 6 @A42h CN16 Pin 6 GPIO Set 3 / Bit 7 U50 Pin 11 (GPIO 37) Port 5 @A42h CN16 Pin 5 GPIO Set 3 / Bit 6 U50 Pin 12 (GPIO 36) Port 4 @A40h CN16 Pin 4 GPIO Set 1 / Bit 4 U50 Pin 31 (GPIO 14) Port 3 @A40h CN16 Pin 3 GPIO Set 1 / Bit 3 U50 Pin 32 (GPIO 13) Port
EPIC Board EPIC-QM57 2.29 External SMBUS and PS_ON# Connector (CN27) Pin Signal 1 SMB_DATA 2 GND 3 SMB_CLK 4 GND 5 PS_ON# 6 +5VA 2.30 FAN Connector (CN28) Pin Signal 1 GND 2 +12V(Default) or +5V 3 Speed Sense 2.31 RS-232/422/485 Serial Port 2 Connector (CN34) Pin Signal Pin Signal 1 DCD2(422TXD-/485DATA-) 2 DSR2 3 RXD2(422RXD+) 4 RTS2 5 TXD2(422TXD+/485DATA+) 6 CTS2 7 DTR2(422RXD-) 8 RI2 / +5V /+12V 9 GND 10 2.
EPIC Board EPIC-QM57 7 SM_DAT 8 CRT_VSYNC 9 DVI_TX1- 10 DVI_TX1+ 11 GND 12 N.C 13 N.C 14 +5V 15 GND 16 HPDET 17 DVI_TX0- 18 DVI_TX0+ 19 GND 20 N.C 21 N.C 22 GND 23 DVI_TXCLK+ 24 DVI_TXCLK- 25 GND 27 N.
EPIC Board EPIC-QM57 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2-23
EPIC Board EPIC-QM57 Chapter 3 Award BIOS Setup Chapter 3 Award BIOS Setup 3-1
EPIC Board 3.1 EPIC-QM57 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors.
EPIC Board 3.2 EPIC-QM57 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press immediately. This will allow you to enter Setup. Standard CMOS Features Use this menu for basic system configuration. (Date, time, IDE, etc.
EPIC Board EPIC-QM57 PnP/PCI Configurations This entry appears if your system supports PnP/PCI. PC Health Status Use this menu to set PC Health Status. Frequency/Voltage Control Use this menu to specify your settings for auto detect DIMM/PCI clock and spread spectrum. Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal performance system operations.
EPIC Board EPIC-QM57 Chapter 4 Driver Installation Chapter 4 Driver Installation 4 - 1
EPIC Board EPIC-QM57 The EPIC-QM57 comes with a DVD-ROM that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: Step 1 – Install Chipset Driver Step 2 – Install VGA Driver Step 3 – Install LAN Driver Step 4 – Install ME Driver Step 5 – Install Audio Driver Step 6 – Install Touch Driver Step 7 – Install RAID & AHCI Driver Please read instructions below for further detailed installations.
EPIC Board EPIC-QM57 4.1 Installation: Insert the EPIC-QM57 DVD-ROM into the DVD-ROM Drive. And install the drivers from Step 1 to Step 7 in order. Step 1 – Install Chipset Driver 1. Click on the Step1 - CHIPSET folder and then double click on the infinst_autol(9.1.1.1020).exe 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 2 – Install VGA Driver 1. Click on the Step2 - VGA folder and select the OS folder your system is 2.
EPIC Board EPIC-QM57 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 5 – Install Audio Driver 1. Click on the Step5- AUDIO folder and double click on the SETUP.exe 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 6 – Install Touch Driver 1. Click on the Step6- Touch folder and double click on the Setup.exe 2. Follow the instructions that the window shows 3.
EPIC Board EPIC-QM57 Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
EPIC Board EPIC-QM57 A.1 Programming EPIC-QM57 utilizes ITE 8781 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON attached based program to fit on initial watchdog which you can timer program develop is also customized your application. Configuring Sequence Description After the hardware reset or power-on reset, the ITE 8781 enters the normal mode KBC.
EPIC Board EPIC-QM57 There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited normally. (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
EPIC Board EPIC-QM57 WatchDog Timer Configuration Registers Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
EPIC Board EPIC-QM57 Watch Dog Timer 1, 2, 3 Configuration Register (Index=72h, 82h, 92h Default=001s0000b) Watch Dog Timer 1,2,3 Time-Out Value (LSB) Register (Index=73h,83h,93h, Default=38h) Watch Dog Timer 1,2,3 Time-Out Value (MSB) Register (Index=74h,84h,94h Default=00h) Appendix A Programming the Watchdog Timer A-5
EPIC Board EPIC-QM57 A.2 ITE8781 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ; 10 Sec dec al Watch_Dog_Setting: ;Timer setting mov al, cl mov cl, 73h call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
EPIC Board EPIC-QM57 call Superio_Set_Reg ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh MOV CX,04h Init_1: MOV AL,BYTE PTR CS:[SI] OUT DX,AL INC SI LOOP Init_1 RET Enter_Configuration_Mode ENDP Exit_Configuration_Mode PROC NEAR MOV AX,0202h Appendix A Programming the Watchdog Timer A-7
EPIC Board CALL Write_Configuration_Data RET Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,81h JNE Not_Initial Need_Initial: STC RET Not_Initial: CLC RET Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] Appendix A Programming the Watchdog Timer A-8 EPIC-QM57
EPIC Board EPIC-QM57 OUT DX,AL MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX RET Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL RET Write_Configuration_Data ENDP Superio_Set_Reg proc near push ax MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al ret Superio_Set_Reg endp.
EPIC Board Set_Logic_Device proc EPIC-QM57 near push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax ret Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02Fh END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 . .
EPIC Board EPIC-QM57 Appendix B I/O Information Appendix B I/O Information B-1
EPIC Board B.
EPIC Board EPIC-QM57 Appendix B I/O Information B-3
EPIC Board st B.
EPIC Board EPIC-QM57 B.3 IRQ Mapping Chart B.
EPIC Board EPIC-QM57 Appendix C Mating Connector Appendix C Mating Connector C - 1
EPIC Board EPIC-QM57 C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Function Label Mating Connector Available Cable P/N Cable Vendor Model number CN1 Front Panel Molex Connector 1.25W-T0-B CN2 LCD Inverter/Bac Molex klight Connector LVDS Hirose Connector ZHR-5 CN5 Power Input N/A Connector 1702002010 CN7 +5V/+12V Power Output Connector Audio Connector Molex Big 4P Power cable SATA 2.
EPIC Board PS/2 Wafer Keyboard/M ouse Connector COM Port LIAN CN25/26/34 Connector TAY CN23 EPIC-QM57 B6B-PHDSS Keyboard 1700060157 / Mouse Cable 1.
EPIC Board EPIC-QM57 Appendix D RAID & AHCI Settings Appendix D RAID & AHCI Settings D-1
EPIC Board EPIC-QM57 D.
EPIC Board EPIC-QM57 Step 3: The setting procedures “ In BIOS Setup Menu” A: Advanced -> SATA Configuration -> SATA Mode -> RAID Mode Step 4: The setting procedures “In BIOS Setup Menu” B: Advanced -> Launch Storage OpROM -> Enabled Appendix D RAID & AHCI Settings D-3
EPIC Board EPIC-QM57 Step 5: The setting procedures “In BIOS Setup Menu” C: Boot -> Boot Option #1 -> DVD-ROM Type Step 6: The setting procedures “In BIOS Setup Menu” D: Save & Exit -> Save Changes and Exit Appendix D RAID & AHCI Settings D-4
EPIC Board EPIC-QM57 Step 7: Press Ctrl-I to enter MAIN MENU Step 8: Choose “1.
EPIC Board Step 9: RAID Level -> RAID0(Stripe) Step 10: Choose “Create Volume” Appendix D RAID & AHCI Settings D-6 EPIC-QM57
EPIC Board EPIC-QM57 Step 11: Choose “Y” Step 12: Choose “5.
EPIC Board Step 13: Choose “Y” Step 14: Setup OS Appendix D RAID & AHCI Settings D-8 EPIC-QM57
EPIC Board EPIC-QM57 Step 15: Press “F6” Step 16: Choose “S” Appendix D RAID & AHCI Settings D-9
EPIC Board EPIC-QM57 Step 17: Choose “Intel(R) Mobile Express Chipset SATA RAID Controller” Step 18: It will show the model number you select and then press “ENTER” Appendix D RAID & AHCI Settings D-10
EPIC Board EPIC-QM57 Step 19: Setup is starting Windows Appendix D RAID & AHCI Settings D-11
EPIC Board EPIC-QM57 D.
EPIC Board EPIC-QM57 Step 3: The setting procedures “ In BIOS Setup Menu” A: Advanced -> SATA Configuration -> SATA Configuration -> SATA Mode -> AHCI Mode Step 4: The setting procedures “In BIOS Setup Menu” B: Boot -> Boot Option #1 -> DVD-ROM Type Appendix D RAID & AHCI Settings D-13
EPIC Board EPIC-QM57 Step 5: The setting procedures “In BIOS Setup Menu” C: Save & Exit -> Save Changes and Exit Step 6: Setup OS Appendix D RAID & AHCI Settings D-14
EPIC Board EPIC-QM57 Step 7: Press “F6” Step 8: Choose “S” Appendix D RAID & AHCI Settings D-15
EPIC Board EPIC-QM57 Step 9: Choose “Intel(R) 7 Series Chipset Family SATA AHCI Controller” Step 10: It will show the model number you select and then press “ENTER” Appendix D RAID & AHCI Settings D-16
EPIC Board EPIC-QM57 Step 11: Setup is loading files Appendix D RAID & AHCI Settings D-17
