Owner manual

ETX CPU Module ETX-LN
Appendix C AHCI Setting C-2
C.1 Setting AHCI
OS installation to SETUP AHCI Mode
Step 1: Copy below files from “Driver CD -> STEP5 -
AHCI\WinXP_32” or “Driver CD -> STEP5 - AHCI\WinXP_64” to
diskette.
Step 2: Connect the USB Floppy drive to the board and insert the
diskette from previous step.
Step 3: Configure SATA Controller to AHCI mode in BIOS SETUP
Menu: Advanced -> IDE Configuration -> Configure SATA As ->
AHCI Mode