Full-size SBC FSB-B75H FSB-B75H ® Intel CoreTM i7/i5/i3 LGA 1155 Processor Full-size CPU Card With DDR3, 2 Gigabit Ethernet USB 3.0, SATA 6.0Gb/s FSB-B75H Manual Rev.A 3rd Ed.
Full-size SBC FSB-B75H Copyright Notice This document is copyrighted, 2014. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Full-size SBC FSB-B75H Acknowledgments All other products’ name or trademarks are properties of their respective owners. AMI is a trademark of American Megatrends Inc. Intel , Core™ are trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corp. PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation. ® ® ® All other product names or trademarks are properties of their respective owners.
Full-size SBC FSB-B75H Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 Serial Port Cable with one DB-9 connector 1 Cable with serial port and LPT port 1 USB Cable 4 SATA Cables 1 DVD-ROM for manual (in PDF format) and Drivers 1 FSB-B75H If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Full-size SBC FSB-B75H Contents Chapter 1 General Information 1.1 Introduction ................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................... 2-2 2.2 Location of Connectors and Jumpers ....................... 2-3 2.
Full-size SBC FSB-B75H Chapter 4 Driver Installation 4.1 Installation ................................................................. 4-3 Appendix A Programming The Watchdog Timer A.1 Programming .........................................................A-2 A.2 W83627DHG Watchdog Timer Initial Program ......A-6 Appendix B I/O Information B.1 I/O Address Map ....................................................B-2 st B.2 1 MB Memory Address Map ................................B-4 B.3 IRQ Mapping Chart .
Full-size SBC FSB-B75H Chapter 1 General Information Chapter 1 General Information 1-1
Full-size SBC FSB-B75H 1.1 Introduction AAEON, a leading Industrial PC manufacturer, announces the debut of a high performance full-size Single Board Computer, the FSB-B75H. AAEON has developed this full-size SBC based on the latest Intel® B75 chipset and the Intel® 3rd generation Core™i7/i5/i3 LGA 1155 processor, to fulfill the increasing demands of multi-core processing. In a PICMG 1.
Full-size SBC FSB-B75H 1.2 Features Intel® 3rd Generation CoreTM i7/i5/i3 LGA 1155 Processor Intel® B75 Chipset Dual-Channel DDR3 1333/1600 DIMM Socket x 2 (Up to 16 GB) Intel® B75 Integrated Intel® HD Graphics Gigabit Ethernet x 2 SATA 6.0 Gb/s x 1, SATA 3.0 Gb/s x 2 (Backplane x 2), CFast™ x 1, Floppy Disk Drive x 1 USB3.0 x 4, USB2.0 x 4, COM x 2, LPT x 1 Compliance with PICMG 1.3 ATX 2.
Full-size SBC FSB-B75H 1.3 Specification System Form Factor PICMG 1.
Full-size SBC FSB-B75H non-condensing Display Chipset Intel® B75 Graphic Engine Integrated Intel® HD Graphics Resolution Up to 2048x1536 @ 75Hz for CRT Output Interface DVI x 1 on bracket, VGA (optional) Storage SATA 6.0 Gb/s x 1, SATA 3.0 Gb/s x 2 I/O (Backplane x 2), CFast™ x 1 Serial Port COM x 2 (box headers) COM1: RS-232 COM2: RS-232/422/485 PS/2 Port Keyboard/Mouse x 1 (4x2 pin header) USB USB3.0 x 4 (Internal 10x2 pin header x 2) USB2.
Full-size SBC FSB-B75H Chapter 2 Quick Installation Guide Chapter 2 Quick Installation Guide 2 - 1
Full-size SBC FSB-B75H 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
Full-size SBC FSB-B75H 2.
Full-size SBC 2.
Full-size SBC FSB-B75H 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: Jumpers Label Function JP2 Auto Power Button JP3 Clear CMOS 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
Full-size SBC FSB-B75H DIO1 Digital I/O Pin Header FDD1 Floppy Pin Header LPT1 Parallel Port Pin Header USB1 USB 3.0 Pin Header USB2 USB Pin Header USB4 USB Connector USB5 USB 3.
Full-size SBC FSB-B75H 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
Full-size SBC FSB-B75H 2.7 Auto Power Button (JP2) JP2 Function 1-2 Power ON by Button (default) 2-3 Auto Power ON 2.8 Clear CMOS (JP3) JP3 Function 1-2 Protected (default) 2-3 Clear 2.9 Front Panel Connector (FP1) Pin Signal Pin Signal 1 Power On Button (+) 2 Reset Switch (+) 3 Power On Button (-) 4 Reset Switch (-) 5 HDD LED (+) 6 Power LED (+) 7 HDD LED (-) 8 Power LED (-) 2.
Full-size SBC FSB-B75H 2.11 Digital I/O Pin Header (DIO1) Pin Signal Pin Signal 1 DIO_30 2 DIO_31 3 DIO_32 4 DIO_33 5 DIO_34 6 DIO_35 7 DIO_36 8 DIO_37 9 +5V 10 GND 2.12 USB3.
Full-size SBC FSB-B75H Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2 - 10
Full-size SBC FSB-B75H Chapter 3 AMI BIOS Setup Chapter 3 AMI BIOS Setup 3-1
Full-size SBC FSB-B75H 3.1 System Test and Iinitialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors. System configuration verification These routines check the current system configuration stored in the CMOS memory and BIOS NVRAM.
Full-size SBC FSB-B75H 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM and BIOS NVRAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press or immediately. This will allow you to enter Setup. Main Set the date, use tab to switch between date elements.
Full-size SBC Setup Menu Setup submenu: Main Chapter 3 AMI BIOS Setup 3-4 FSB-B75H
Full-size SBC FSB-B75H Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-5
Full-size SBC FSB-B75H ACPI Settings Options Summary : ACPI Sleep S1 Only (CPU Stop State Clock) S3 Only (Suspend to Default RAM) Select ACPI sleep state the system will enter when the SUSPEND button is pressed.
Full-size SBC FSB-B75H CPU Configuration Options Summary : Hyper-Threading Disabled Enabled Default Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.
Full-size SBC FSB-B75H When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology SATA Configuration (IDE) Chapter 3 AMI BIOS Setup 3-8
Full-size SBC FSB-B75H SATA Configuration (AHCI) Options summary : SATA Controller(s) Enabled Default Disabled Enable or disable SATA device. SATA Mode Selection IDE Default AHCI Determines how SATA controller(s) operate.
Full-size SBC FSB-B75H USB Configuration Options summary : Legacy USB Support Enabled Default Disabled Auto Enable Legacy USB support. Auto option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. USB3.0 Support Enabled Default Disabled Enable/Disable USB3.0 (XHCI) Controller support.
Full-size SBC FSB-B75H W83627DHG Super IO Configuration Options Summary : Floppy Disk Set Parameters of Floppy Disk Controller Controller (FDC) Configuration Serial Port 1 Set Parameters of Serial Port 1 (COMA) Configuration Serial Port 2 Set Parameters of Serial Port 2 (COMB) Configuration Chapter 3 AMI BIOS Setup 3-11
Full-size SBC FSB-B75H Parallel Port Set Parameters of Parallel Port Configuration (LPT/LPTE) Restore AC Power Always OFF Loss Always ON Last State Default Select AC power state when power is re-applied after a power failure.
Full-size SBC FSB-B75H Options Summary : Floppy Disk Controller Disabled Enabled Default Enable or Disable Floppy Disk Controller Serial Port 1 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default Chapter 3 AMI BIOS Setup 3-13
Full-size SBC FSB-B75H IO=3F8h; IRQ=4 IO=2F8h; IRQ=3 Select an optimal setting for Super IO device.
Full-size SBC Change Settings Auto FSB-B75H Default IO=2F8h; IRQ=3 IO=3F8h; IRQ=4 Select an optimal setting for Super IO device.
Full-size SBC FSB-B75H Options Summary : Parallel Port Disabled Enabled Default Enable or Disable Parallel Port (LPT/LPTE) Change Settings Auto Default IO=378h; IRQ=5 IO=378h; IRQ=5,6,7,10,11,12 IO=278h; IRQ=5,6,7,10,11,12 IO=3BCh; IRQ=5,6,7,10,11,12 Select an optimal setting for Super IO device. Device Mode STD Printer Mode SPP Mode EPP-1.9 and SPP Mode EPP-1.7 and SPP Mode ECP Mode ECP and EPP 1.9 Mode ECP and EPP 1.
Full-size SBC FSB-B75H Change the Printer Port mode.
Full-size SBC FSB-B75H Smart Fan Mode Configuration Options Summary : SYS Smart Fan Manual Mode Default Mode Thermal Cruise Mode Fan Speed Cruise Mode SYS Smart Fan Mode Select SYSFAN PWM/DC 0~255 Default : 255 Voltage Output Input expect PWM Output Value(Range:0 – 255) Chapter 3 AMI BIOS Setup 3-18
Full-size SBC FSB-B75H CPU Smart Fan 0 Manual Mode Default Mode Thermal Cruise Mode Fan Speed Cruise Mode SMART FAN III Mode CPU Smart Fan 0 Mode Select CPUFAN0 PWM/DC 0~255 Default : 255 Voltage Output Input expect PWM Output Value(Range: 0 – 255) It’s also the Fan Output initial value in Smart Fan III Mode FAN Step down Time Time Default : 10 FAN Step down time value, unit is 0.
Full-size SBC Dynamic Digital IO( Default Disabled) Chapter 3 AMI BIOS Setup 3-20 FSB-B75H
Full-size SBC FSB-B75H Dynamic Digital IO(Enabled) Options Summary : Dynamic Digital IO Dynamic Digital IO Configuration Configuration Chapter 3 AMI BIOS Setup 3-21
Full-size SBC FSB-B75H Dynamic Digital IO Configuration Options Summary : DIO0 Direction Input Default Output Set Digital IO as Input or Output DIO1 Direction Input Default Output Set Digital IO as Input or Output DIO2 Direction Input Output Set Digital IO as Input or Output Chapter 3 AMI BIOS Setup 3-22 Default
Full-size SBC DIO3 Direction Input FSB-B75H Default Output Set Digital IO as Input or Output DIO4 Direction Input Output Default Set Digital IO as Input or Output DIO5 Direction Input Output Default Set Digital IO as Input or Output DIO6 Direction Input Output Default Set Digital IO as Input or Output DIO7 Direction Input Output Default Set Digital IO as Input or Output Output Level Hi Default Low Set Digital IO Output as Hi or Low Chapter 3 AMI BIOS Setup 3-23
Full-size SBC FSB-B75H S5 RTC Wake Settings Options Summary : Wake system with Disabled Fixed Time Enabled Default Enable or disable System wake on alarm event. When enabled, System will wake on the hr::min::sec specified Wake system with Disabled Dynamic Time Enabled Default Enable or disable System wake on alarm event.
Full-size SBC FSB-B75H Setup submenu: Chipset Options Summary : System Agent (SA) System Agent (SA) Parameters Configuration PCH-IO Configuration PCH Parameters Chapter 3 AMI BIOS Setup 3-25
Full-size SBC FSB-B75H System Agent (SA) Configuration Options Summary : Graphics Configure PEGO B0:D1:F0 Fen1-Gen3 Configuration Chapter 3 AMI BIOS Setup 3-26
Full-size SBC FSB-B75H Graphics Configuration Options Summary : Primary Display Auto Default IGFX PEG PCI Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx.
Full-size SBC FSB-B75H Disabled Enabled Keep IGD enabled based on the setup options.
Full-size SBC FSB-B75H 480M 512M 1024M Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. DVMT Total Gfx Mem 128M 256M MAX Default Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device. Primary IGFX Boot VBIOS Display Default Default CRT DVI Select the Video Device which will be activated during POST. This has no effect if external graphics present. Secondary boot display selection will appear based on your selection.
Full-size SBC FSB-B75H PCH-IO Configuration Options Summary : Power Mode ATX Type Default AT Type Select power supply mode. PCI Express PCI Express Configuration settings Configuration PCH Azalia PCH Azalia Configuration settings.
Full-size SBC FSB-B75H En/Disable Onboard LAN 1 (RTL8111E) Onboard LAN 2 Disabled Enabled Default En/Disable Onboard LAN 2 (RTL8111E) RI# Wake Disabled Enabled Default For En/Disable Ring In wake up function. Attention please, when this function is enabled, some devices which connect to Serial Port may cause the system auto wake up from sleep mode. PCIE PORTS 0-3 Four x1 Ports Default Configuration One x4 Port To configure PCI-E Port 0-3 of PCH as four x1 slots or one x4 slot. Step: 1.
Full-size SBC FSB-B75H PCI Express Configuration Options Summary : PCI Express Root Disabled Port 1 Enabled Default Control the PCI Express Root Port. PCIe Speed Auto Gen 1 Gen 2 Select PCI Express port speed.
Full-size SBC FSB-B75H Control the PCI Express Root Port. PCIe Speed Auto Gen 1 Gen 2 Select PCI Express port speed. PCI Express Root Disabled Port 3 Enabled Default Control the PCI Express Root Port. PCIe Speed Auto Gen 1 Gen 2 Select PCI Express port speed. PCI Express Root Disabled Port 4 Enabled Default Control the PCI Express Root Port. PCIe Speed Auto Gen 1 Gen 2 Select PCI Express port speed.
Full-size SBC FSB-B75H PCH Azalia Configuration Options Summary : Azalia Disabled Enabled Auto Default Control Detection of the Azalia device. Disabled = Azalia will be unconditionally disabled Enabled = Azalia will be unconditionally Enabled Auto = Azalia will be enabled if present, disabled otherwise.
Full-size SBC FSB-B75H Setup submenu: Boot Boot Option Priorities Options Summary : Boot Option #X Your device Your device Sets the system boot order Chapter 3 AMI BIOS Setup 3-35
Full-size SBC FSB-B75H Setup submenu: Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility. If you highlight these items and press Enter, a dialog box appears which lets you enter a password. letters or numbers. password.
Full-size SBC FSB-B75H Setup utility. Removing the Password Highlight this item and type in the current password. At the next dialog box press Enter to disable password protection.
Full-size SBC FSB-B75H Chapter 4 Driver Installation Chapter 4 Driver Installation 4-1
Full-size SBC FSB-B75H The FSB-B75H comes with a DVD-ROM that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: Step 1 – Install Chipset Driver Step 2 – Install VGA Driver Step 3 – Install LAN Driver Step 4 – Install Audio Driver Step 5 – Install USB3.
Full-size SBC FSB-B75H 4.1 Installation: Insert the FSB-B75H DVD-ROM into the DVD-ROM Drive. And install the drivers from Step 1 to Step 7 in order. Step 1 – Install Chipset Driver 1. Click on the Step 1-Chipset folder and double click on the infinst_autol_9.3.0.1021.exe file 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 2 – Install VGA Driver 1. Click on the Step 2-VGA folder and select the OS folder your system is 2.
Full-size SBC FSB-B75H Step 4 – Install Audio Driver 1. Click on the Step 4-Audio folder and select the OS folder your system is 2. Double click on the .exe file located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 5 – Install USB3.0 Driver 1. Click on the Step 5-USB3.0 folder and double click on the Setup.exe file 2. Follow the instructions that the window shows 3.
Full-size SBC FSB-B75H Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Full-size SBC FSB-B75H A.1 Programming FSB-B75H utilizes W83627DHG chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application.
Full-size SBC FSB-B75H (3) Exit the W83627DHG config Mode. Undesired result may occur if the config Mode is not exited normally. (1) Enter the W83627DHG config Mode To enter the W83627DHG config Mode, two special I/O write operations are to be performed during Wait for Key state. To ensure the initial state of the key-check logic, it is necessary to perform two write operations to the Special Address port (2EH).
Full-size SBC FSB-B75H 1 R/W 0: GPIO5 is inactive. 1: GPIO5 is active. 0 R/W 0: WDTO# and PLED are inactive. 1: WDTO# and PLED are inactive. CR F5h. (WDTO# and KBC P20 Control Mode Register; Default 00h) BIT READ/WRITE 7~5 Reserved. 4 R/W 3 R/W 2 R/W 1 R/W 0 DESCRIPTION 1000 time faster in WDTO# count mode. 0: Disable. 1: Enable. (If bit-3 is Second Mode, the count mode is 1/1000 Sec.) (If bit-3 is Minute Mode, the count mode is 1/1000 Min.) Select WDTO# count mode. 0: Second Mode.
Full-size SBC FSB-B75H 01h: Time-out occurs after 1 second/minute 02h: Time-out occurs after 2 second/minutes 03h: Time-out occurs after 3 second/minutes ………………………………………………….. FFh: Time-out occurs after 255 second/minutes CR F7h. (WDTO# Control & Status Register; Default 00h) BIT READ/WRITE 7 R/W 6 R/W 5 Write “1” Only 4 R/W Write“0”Clear 3~0 R/W DESCRIPTION Mouse interrupt reset watch-dog timer enable 0: Watchdog timer is not affected by mouse interrupt.
Full-size SBC FSB-B75H A.2 W83627DHG Watchdog Timer Initial Program LDN Register Bit WDT Timer value 0x07 0xF6 Bit [7-0] WDT Unit 0x07 0xF5 Bit3 Description 00h: Time-out Disable 01h: Time-out occurs after 1 minute only. 02h: Time-out occurs after 2 second/minutes 03h: Time-out occurs after 3 second/minutes ………………………....................................... FFh: Time-out occurs after 255 second/minutes (The deviation is approx 1 second.) Select WDTO# count mode. 0: Second Mode. 1: Minute Mode.
Full-size SBC FSB-B75H ************************************************************************************ // Procedure : AaeonWDTConfig void AaeonWDTConfig (void){ Byte val; //Super I/O Entry Key outportb(SIOIndex,0x87); outportb(SIOIndex,0x87); //Setting WDT Pin.
Full-size SBC FSB-B75H ************************************************************************************ // Procedure : void AaeonWDTEnable (Byte Timer, boolean Unit){ Byte val; //Super I/O Entry Key outportb(SIOIndex,0x87); outportb(SIOIndex,0x87); // Select Logic Device Number Register outportb(SIOIndex,0x07); outportb(SIOData,0x08); // Setting WDT Operation Mode outportb(SIOIndex,0xF5); val = inportb((SIOData); outportb(SIOIndex,0xF5); outportb(SIOData, val | Unit << 3 ); // Setting WDT Counter outp
Full-size SBC FSB-B75H Appendix B I/O Information Appendix B I/O Information B-1
Full-size SBC B.
Full-size SBC FSB-B75H Appendix B I/O Information B-3
Full-size SBC B.
Full-size SBC FSB-B75H B.
Full-size SBC Appendix B I/O Information B-6 FSB-B75H
Full-size SBC FSB-B75H B.
Full-size SBC FSB-B75H Appendix C Mating Connector Appendix C Mating Connector C - 1
Full-size SBC FSB-B75H C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables.
Full-size SBC CPU_FAN FAN Connector SYS_FAN1 FAN Connector DIMM1 DDR3 204PIN SKT DIMM2 DDR3 204PIN SKT FDD1 Floppy Connector DVI1 DVI-I Connector VGA1 VGA Connector LAN1 LAN Connector LAN2 LAN Connector CN5 CFast Connector FSB-B75H Catch Electronics Catch Electronics KORTAK 1190-700-042 N/A 1190-700-042 N/A AR240H-101BA0H N/A KORTAK AR240H-101BA0H N/A Catch Electronics KORTAK 1137-000-34SA NA 9D0290-08SC-0 0H HDLH-B15-CFH N1T-1-R RDA-1A5BAK1 A RDA-1A5BAK1 A N7G24-A0B2R A-10-0HT-DY NA Astro
Full-size SBC FSB-B75H Appendix D AHCI Settings Appendix D AHCI Settings D-1
Full-size SBC FSB-B75H D.1 Setting AHCI OS Installation to Setup AHCI mode Step 1: Copy the files below from the Driver CD: Step 6 AHCI\Driver\winxp_32 or winxp_64 to Disk. Step 2: Connect the USB Floppy Disk with the AHCI files to the board.
Full-size SBC FSB-B75H Step 3: To install “In BIOS Setup Menu”, select Advanced -> SATA Configuration -> SATA Mode Selection -> AHCI Step 4: Next, select Boot -> Boot Option #1 -> DVD ROM Type Appendix D AHCI Settings D-3
Full-size SBC FSB-B75H Step 5: To save, select Save & Exit -> Save Changes and Exit Step 6: Setup OS Appendix D AHCI Settings D-4
Full-size SBC FSB-B75H Step 7: Press “F6” Step 8: Choose “S” Appendix D AHCI Settings D-5
Full-size SBC FSB-B75H Step 9: Mobile Choose “Intel(R) 7 Series Chipset Family SATA AHCI Controller” Desktop Choose “Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller” Appendix D AHCI Settings D-6
Full-size SBC FSB-B75H Step 10: Select “ENTER” to choose the model number Mobile Desktop Appendix D AHCI Settings D-7
Full-size SBC Step 11: Setup is loading files Appendix D AHCI Settings D-8 FSB-B75H
