Full-size SBC FSB-G41H FSB-G41H ® Intel CoreTM 2 Duo/ Core 2 Quad LGA775 Processor Full-size CPU Card With Two DDR3 1066/800 DIMM Gigabit Ethernet, IDE, SATA 3.0Gb/s FSB-G41H Manual Rev. A 2nd Ed. Aug.
Full-size CPU Card FSB-G41H Copyright Notice This document is copyrighted, 2012. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Full-size CPU Card FSB-G41H Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™ is a trademark of the Compact Flash Association. Intel®, Core™ 2 Duo, Core™ 2 Quad, Pentium®, and Celeron® are trademarks of Intel® Corporation. Microsoft Windows is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc.
Full-size CPU Card FSB-G41H Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1709070800 SATA Cable 1701340704 FDD Flat Cable 1701400453 ATA-100 Cable 1700060192 Keyboard and Mouse Cable 1701260307 LPT and COM Flat Cable with bracket 1701100305 COM Flat Cable with bracket 1709100201 USB Cable w/ Bracket CD-ROM for manual (in PDF format) and drivers FSB-G41H CPU Card If any of these items should be
Full-size CPU Card FSB-G41H Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Feature ...................................................................... 1-3 1.3 Specification .............................................................. 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................... 2-2 2.2 Location of Connectors and Jumpers ....................... 2-3 2.
Full-size CPU Card Chapter 3 FSB-G41H Award BIOS Setup 3.1 System Test and Initialization. .................................. 3-2 3.2 Award BIOS Setup .................................................... 3-3 Chapter 4 Driver Installation 4.1 Installation ................................................................. 4-3 Appendix A Programming The Watchdog Timer A.1 Programming .........................................................A-2 A.2 ITE8718 Watchdog Timer Initial Program..............
Full-size SBC FSB-G41H Chapter 1 General Information Chapter 1 General Information 1-1
Full-size SBC FSB-G41H 1.1 Introduction AAEON announces a new full-size form factor Single Board Computer (SBC) with PICMG 1.3 - FSB-G41H, which is based on the use of Intel® CoreTM 2 Duo / CoreTM 2 Quad / Pentium® D/ Celeron® processor. FSB-G41H utilizes Intel® LGA 775 CPU with high CPU core frequencies with the Front Side Bus (FSB) running at 800/1066/1333 MHz. FSB-G41H supports DDR3 800/1066 system memory up to 4GB.
Full-size SBC FSB-G41H 1.2 Features z Intel® Core™ 2 Duo/ Core™ 2 Quad/ Pentium® D/ Celeron® LGA 775 Processor, FSB 800/1066/1333 MHz z Intel® G41+ ICH7R z 240-Pin Dual-Channel DDR3 800/1066 DIMM Slot x 2 (Up To 4GB) z 10/100/1000Base-TX Ethernet x 2 z Intel® G41 Integrated GMA X4500 Graphic Engine z HDAC Daughter Board z Onboard SATA 3.0Gb/s x 4 Support RAID 0/1/5/10, IDE x 1, Floppy x 1, CompactFlash™ Type 2 x 1 z COM x 2, USB2.
Full-size SBC FSB-G41H 1.3 Specification System z Form Factor PICMG 1.
Full-size SBC FSB-G41H z Gross Weight 1.2 lb (0.5kg) z MTBF (Hours) 60,000 VGA Controller Intel G41 integrated GMA X4500 Display z Graphic Engine z Resolution 2048x1536 @ 75 Hz for CRT I/O: ITE IT8718F z Storage IDE slot x 1, SATA 3.0Gb/s x 4 with RAID 0,1,5 and 10, CompactFlash™ Type 2 x 1, Standard Floppy Disk x 1 z Serial Port COM port x 2:(Internal Pin Header x 2) COM 1: RS-232 COM 2: RS-232/422/485 z Parallel Port Supports SPP/EPP/ECP mode z Universal Serial USB2.
Full-size SBC FSB-G41H Chapter 2 Quick Installation Guide Chapter 2 Quick Installation Guide 2 - 1
Full-size SBC FSB-G41H 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
Full-size SBC FSB-G41H 2.
Full-size SBC 2.
Full-size SBC FSB-G41H Chapter 2 Quick Installation Guide 2 - 5
Full-size SBC FSB-G41H 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
Full-size SBC FSB-G41H 2.
Full-size SBC FSB-G41H 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
Full-size SBC FSB-G41H 2.7 Clear CMOS (CMOS1) CMOS1 Function 1-2 Clear 2-3 Normal (default) 2.8 CompactFlash Voltage Selection (JP1) JP1 Function 1-2 +3.3V 2-3 +5V (default) 2.9 Front Panel Connector (FP1) Pin Signal Pin Signal 1 Power On Button (+) 2 Reset Switch (+) 3 Power On Button (-) 4 Reset Switch (-) 5 IDE LED (+) 6 Power LED (+) 7 IDE LED (-) 8 Power LED (-) 2.
Full-size SBC FSB-G41H The pin definitions are illustrated below: Pin Signal Pin Signal 1 Digital- IN/OUT(Bit 7) 2 Digital- IN/OUT (Bit 6) 3 Digital- IN/OUT (Bit 5) 4 Digital- IN/OUT (Bit 4) 5 Digital- IN/OUT (Bit 3) 6 Digital- IN/OUT (Bit 2) 7 Digital- IN/OUT (Bit 1) 8 Digital- IN/OUT (Bit 0) 9 +5V 10 GND The pin definitions and registers mapping are illustrated below: Address: 801H 4 in / 4 out Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 GPI 27 (MSB) GPI 26 GPI 25
Full-size SBC 5 IRRX 6 N.C FSB-G41H 2.13 Audio Pin Header (CN3) Pin Signal Pin Signal 1 -HDA_RST 2 HDA_SYNC 3 HDA_SDIN2 4 HDA_SDOUT 5 GND 6 HDA_BITCLK 7 GND 8 +5V 9 N.C 10 +3.3V 2.14 Internal Keyboard Connector (CN5) Pin Signal 1 KBCLK 2 KBDAT 3 N.C 4 GND 5 +5V 2.15 RS-232 Serial Port Connector (COM1) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.
Full-size SBC FSB-G41H 2.16 RS-232/422/485 Serial Port Connector (COM2) Pin Signal Pin Signal 1 DCD(422TXD-/485DATA-) 2 RXD(422RXD+) 3 TXD(422TXD+/485DATA+) 4 DTR(422RXD-) 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.C 2.
Full-size SBC FSB-G41H Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2 - 13
Full-size SBC FSB-G41H Chapter 3 Award BIOS Setup Chapter 3 Award BIOS Setup 3-1
Full-size SBC 3.1 FSB-G41H System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors.
Full-size SBC 3.2 FSB-G41H Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press immediately. This will allow you to enter Setup. Standard CMOS Features Use this menu for basic system configuration. (Date, time, IDE, etc.
Full-size SBC FSB-G41H Frequency/Voltage Control Use this menu to specify your settings for auto detect DIMM/PCI clock and spread spectrum. Load Fail-Safe Defaults Use this menu to load the BIOS default values for the minimal/stable performance for your system to operate. Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal performance system operations.
Full-size SBC FSB-G41H Setup Menu Press Delete to run Setup Root Setup Menu Chapter 3 Award BIOS Setup 3-5
Full-size SBC Setup menu: Standard CMOS Features Item Content Summary : Chapter 3 Award BIOS Setup 3-6 FSB-G41H
Full-size SBC FSB-G41H Chapter 3 Award BIOS Setup 3-7
Full-size SBC Setup Submenu: Advanced BIOS Features IDE Channel # Master/Slave Item Content Summary : Chapter 3 Award BIOS Setup 3-8 FSB-G41H
Full-size SBC FSB-G41H Setup menu: Advanced BIOS Features Chapter 3 Award BIOS Setup 3-9
Full-size SBC Item Content Summary : Chapter 3 Award BIOS Setup 3-10 FSB-G41H
Full-size SBC FSB-G41H Chapter 3 Award BIOS Setup 3-11
Full-size SBC Setup menu: Advanced BIOS Features CPU Feature Item Content Summary : Chapter 3 Award BIOS Setup 3-12 FSB-G41H
Full-size SBC FSB-G41H Setup menu: Advanced BIOS Features Hard Disk Boot Priority Item Content Summary : Chapter 3 Award BIOS Setup 3-13
Full-size SBC Setup menu: Advanced Chipset Features Item Content Summary : Chapter 3 Award BIOS Setup 3-14 FSB-G41H
Full-size SBC FSB-G41H Setup menu: Advanced Chipset Features PCI Express Root Port Function Chapter 3 Award BIOS Setup 3-15
Full-size SBC Item Content Summary : Setup menu: Integrated Peripherals Item Content Summary : Chapter 3 Award BIOS Setup 3-16 FSB-G41H
Full-size SBC FSB-G41H Setup menu: Integrated Peripherals OnChip IDE Device Item Content Summary : Chapter 3 Award BIOS Setup 3-17
Full-size SBC Chapter 3 Award BIOS Setup 3-18 FSB-G41H
Full-size SBC FSB-G41H Setup menu: Integrated Peripherals Onboard Device Chapter 3 Award BIOS Setup 3-19
Full-size SBC Item Content Summary : Setup menu: Advanced BIOS Features SuperIO Device Chapter 3 Award BIOS Setup 3-20 FSB-G41H
Full-size SBC FSB-G41H Item Content Summary : Chapter 3 Award BIOS Setup 3-21
Full-size SBC Setup menu: Integrated Peripherals Digital I/O Device Item Content Summary : Chapter 3 Award BIOS Setup 3-22 FSB-G41H
Full-size SBC FSB-G41H Setup menu: Integrated Peripherals USB Device Setting Item Content Summary : Chapter 3 Award BIOS Setup 3-23
Full-size SBC Setup menu: Power Management Setup Chapter 3 Award BIOS Setup 3-24 FSB-G41H
Full-size SBC FSB-G41H Item Content summary : Chapter 3 Award BIOS Setup 3-25
Full-size SBC Chapter 3 Award BIOS Setup 3-26 FSB-G41H
Full-size SBC FSB-G41H Setup menu: Power Management Setup PCI Express PM Function Item Content Summary : Chapter 3 Award BIOS Setup 3-27
Full-size SBC Setup menu : PnP/PCI Configurations Item Content summary : Chapter 3 Award BIOS Setup 3-28 FSB-G41H
Full-size SBC FSB-G41H Chapter 3 Award BIOS Setup 3-29
Full-size SBC Chapter 3 Award BIOS Setup 3-30 FSB-G41H
Full-size SBC FSB-G41H Chapter 3 Award BIOS Setup 3-31
Full-size SBC Setup submenu: PC Health Status Chapter 3 Award BIOS Setup 3-32 FSB-G41H
Full-size SBC FSB-G41H Item Content summary : Other Root Options Load Fail-safe Defaults Load Fail-safe Default values for all the setup questions. If you highlight this item and press [Enter], a dialog box asks if you want to install Fail-safe Default settings for all the items in the Setup utility. Press [Y] and then press [Enter] , the Fail-safe Default setting thus will be loaded. Load Optimal Defaults Load optimal Default values for all the setup questions.
Full-size SBC FSB-G41H password. Save & Exit Setup Highlight this item and press [Enter], a dialog box asks if you want to save any changes that you have made in the Setup utility and exit the Setup utility. When the Save to CMOS dialog box appears, press [Y] & [Enter] to save the changes and exit, or press [N] & [Enter] to return to the setup main menu. [F10] key can be used for this operation.
Full-size SBC FSB-G41H Chapter 4 Driver Installation Chapter 4 Driver Installation 4-1
Full-size SBC FSB-G41H The FSB-G41H comes with a CD-ROM that contains all drivers your need. Follow the sequence below to install the drivers: Step 1 – Install INF Driver Step 2 – Install VGA Driver Step 3 – Install LAN Driver Step 4 – Install RAID Driver Please read following instructions for detailed installations.
Full-size SBC FSB-G41H 4.1 Installation: Insert the FSB-G41H CD-ROM into the CD-ROM Drive. And install the drivers from Step 1 to Step 4 in order. Step 1 – Install INF Driver 1. Click on the step1 -- INF folder and then double click on the Setup.exe 2. Follow the instructions that the window shows 3. The system will help you to install the driver automatically Step 2 – Install VGA Driver 1. Click on the step2 -- VGA folder and select the OS your system is 2. Double click on .
Full-size SBC FSB-G41H The following details the installation of the drivers while installing Windows XP/ 2000. 1. When you start installing Windows XP and older operating systems, you may encounter a message stating, “Setup could not determine the type of one or more mass storage devices installed in your system”. If this is the case, then you are already in the right place and are ready to supply the driver. If this is not the case, then press F6 when prompted at the beginning of Windows setup. 2.
Full-size SBC FSB-G41H 2. When prompted, insert the floppy disk or media (Floppy, CD/DVD or USB) you created in step 3 and press Enter. 3. You should be shown a list of available SCSI Adapters. This list should include “Intel(R) ICH8R/ICH9R/ICH10R/DO SATA RAID Controller” when the system is in RAID mode and “Intel(R) ICH10D/DO SATA AHCI Controller” when the system is in AHCI mode. 4. Select the appropriate Intel RAID controller and press ENTER. 5.
Full-size SBC FSB-G41H Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Full-size SBC FSB-G41H A.1 Programming FSB-G41H utilizes ITE 8718 chipset as its watchdog timer controller. ( K version ) Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description After the hardware reset or power-on reset, the ITE 8718 enters the normal mode with all logical devices disabled except KBC.
Full-size SBC FSB-G41H (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state. To ensure the initial state of the key-check logic, it is necessary to perform four write opera-tions to the Special Address port (2EH). Two different enter keys are provided to select configuration ports (2Eh/2Fh) of the next step.
Full-size SBC Bit 7-2 1 0 FSB-G41H Description Reserved Returns to the Wait for Key state. This bit is used when the configuration sequence is completed. Resets all logical devices and restores configuration registers to their power-on states. WatchDog Timer Control Register (Index=71h, Default=00h) Bit 7 6 5 4 3-2 1 0 Description WDT is reset upon a CIR interrupt WDT is reset upon a KBC (Mouse) interrupt WDT is reset upon a KBC (Keyboard) interrupt Reserved Reserved Force Time-out.
Full-size SBC FSB-G41H Default=00h) Bit 7-0 Description WDT Time-out value 7-0 WatchDog Timer Time-out Value (MSB) Register (Index=74h, Default=00h) Bit 7-0 Description WDT Time-out value 15-8 A.2 ITE8718 Watchdog Timer Initial Program .MODEL SMALL .
Full-size SBC FSB-G41H call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
Full-size SBC FSB-G41H OUT DX,AL INC SI LOOP Init_1 RET Enter_Configuration_Mode ENDP Exit_Configuration_Mode PROC NEAR MOV AX,0202h CALL Write_Configuration_Data RET Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial Need_Initial: Appendix A Programming the Watchdog Timer A-7
Full-size SBC FSB-G41H STC RET Not_Initial: CLC RET Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX RET Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL RET Write_Configuration_Data ENDP Superio_Set_Reg proc near push ax Appendix A Programming the Watchdog Timer A-8
Full-size SBC FSB-G41H MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al ret Superio_Set_Reg endp.
Full-size SBC END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 . .
Full-size SBC FSB-G41H Appendix B I/O Information Appendix B I/O Information B-1
Full-size SBC B.
Full-size SBC FSB-G41H Appendix B I/O Information B-3
Full-size SBC B.
Full-size SBC FSB-G41H B.3 IRQ Mapping Chart B.
Full-size SBC FSB-G41H Appendix C Mating Connector Appendix C Mating Connector C - 1
Full-size SBC FSB-G41H C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables.
Full-size SBC FSB-G41H 1-G ATX1 4P Power Connnecto r CPU_FAN1 FAN Connector SYS_FAN1 FAN Connector USB1 USB Connector LAN1(G2 、 Ethernet Connector VG) LAN2(G2) Ethernet Connector CN2 IrDA Connector CN6 Mini-Din PS/2 Connector CN5 KB Pin Header COM1 Serial Port Box Header COM2 Serial Port Box Header VGA1 CRT Display Connector CFD1 Compact Flash Connector Catch Electronics 1121-700-04S N/A Catch Electronics Catch Electronics HO-BASE 1190-700-042 N/A 1190-700-042 N/A KS-001V-ANW N/A RDA-1A5BAK1 A
