Half-size SBC HSB-945P HSB-945P Intel® AtomTM N270 Processor One 200-pin DDRII 400/533 SODIMM 2 SATA II/ 1 ATA100/ 1 CompactFlash 5 USB2.0/ 4 COM/ 1 Parallel/ Digital I/O PCI Expansion HSB-945P Manual Rev.A 1st Ed.
Half-size SBC HSB-945P Copyright Notice This document is copyrighted, 2009. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Half-size SBC HSB-945P Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™ is a trademark of the Compact Flash Association. Intel®, Atom™ are trademarks of Intel® Corporation. ® Microsoft Windows is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc. IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation.
Half-size SBC HSB-945P Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 1 Floppy Cable • 1 ATA-100 Cable • 1 PS/2 Keyboard and Mouse Cable • 1 USB Cable • 1 SATA Cable • 1 ATX Cable • 1 Quick Installation Guide • 1 CD-ROM for manual (in PDF format) and drivers • 1 HSB-945P CPU Card If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Half-size SBC HSB-945P Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................... 2-2 2.2 Location of Connectors and Jumpers ....................... 2-3 2.
Half-size SBC HSB-945P 2.19 LVDS (CN8) ............................................................ 2-13 2.20 Internal Keyboard Connector (CN9)........................ 2-14 2.21 LVDS Inverter (CN10) ............................................. 2-14 2.22 PS/2 Keyboard/ Mouse Connector (CN11)............. 2-15 2.23 Audio Pin Header (CN12) ....................................... 2-15 2.24 Front Panel Connector (FP1) .................................. 2-15 2.25 Front Panel Connector (FP2) ...................
Half-size SBC HSB-945P B.3 IRQ Mapping Chart ................................................B-4 B.4 DMA Channel Assignments .................................B-4 Appendix C Mating Connector C.1 List of Mating Connectors and Cables..................
Half-size SBC HSB-945P Chapter 1 General Information Chapter 1 General Information 1- 1
Half-size SBC HSB-945P 1.1 Introduction The HSB-945P supports Intel® AtomTM N270 1.6GHz processor by utilizing the Intel® 945GSE + ICH7-M chipset. Moreover it equips one DDRII SODIMM and supports DDRII 400/533 up to 1GB. This model accommodates two RJ-45 connectors (one 10/100 Base-TX and one 10/100/1000Base-TX Ethernet) that are controlled by one Intel® 82562GZ/82573L and Intel® 82574L. This configuration allows for fast network connections and multi-task data transmission on the network.
Half-size SBC HSB-945P 1.2 Features Intel® AtomTM N270 Processor Intel® 945GSE + ICH7M Chipset 200-Pin Non-ECC DDRII 400/533 SODIMM x 1, Up to 1GB 10/100Base-TX Ethernet x 1 & Gigabit Ethernet x1 Integrated Graphics Media Accelerator GMA950 AC97 Codes Audio Daughter Board Optional ATA100 x1, SATA II x 2, Compact Flash Type II x 1 USB 2.0 x 5, RS-232/422/485 x 1, RS-232 x 3, Parallel x 1, Digital I/O PCI Expansion ATX 2.
Half-size SBC HSB-945P 1.3 Specifications System CPU Onboard Intel® AtomTM N270 1.
Half-size SBC HSB-945P Operating Temperature 32oF~140oF(0oC~60oC) Storage Temperature -4oF~158oF(-20oC~70oC) Operating Humidity 10~80%, non-condensing EMC CE/FCC Class A Display Chipset Intel® 945GSE +Chrontel 7307 Graphic Engine VGA Integrated in Intel® Graphic Engine GMA-950 Resolution Analog up to 1600x1200@75Hz Output Interface VGA x 1, DVI-D x 1 Storage SATA II x 2 (onboard), 40-pini IDE I/O slot x 1, CompactFlashTM Type II x 1 Serial Port COM x 4: (Internal Pin Header x 4) RS-232
Half-size SBC HSB-945P output) Audio AC97 codec audio daughter board optional Chapter 1 General Information 1- 6
Half-size SBC HSB-945P Chapter 2 Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters and further installation instructions, please refer to the user manual CD-ROM that came with the product. Part No. 2007945P10 Printed in Taiwan Oct.
Half-size SBC HSB-945P 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
Half-size SBC HSB-945P 2.
Half-size SBC Solder Side Chapter 2 Quick Installation Guide 2 - 4 HSB-945P
Half-size SBC HSB-945P 2.
Half-size SBC Solder Side Chapter 2 Quick Installation Guide 2 - 6 HSB-945P
Half-size SBC HSB-945P 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: Label Function JP1 Auto Power on Selection JP2 CFD Voltage 3.
Half-size SBC HSB-945P 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
Half-size SBC HSB-945P FAN1 Fan Connector ATX1 +12V Power Connector Chapter 2 Quick Installation Guide 2 - 9
Half-size SBC HSB-945P 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
Half-size SBC HSB-945P 2.7 Auto Power Selection (JP1) JP1 Function Close 1-2 Enable Close 2-3 Disable (Default) 2.8 CFD Voltage 3.3V/5V Selection (JP2) JP2 Function 1-2 3.3V 2-3 5V (Default) 2.9 LVDS Power Selection (JP3) JP3 Function 1-2 +5V 2-3 +3.3V (Default) 2.10 LVDS Inverter Voltage Selection (JP5) JP5 Function 1-2 +5V 2-3 +12V (Default) 2.11 Clear CMOS (JP6) JP6 Function 1-2 Normal (Default) 2-3 Clear CMOS 2.
Half-size SBC Close 3-4 +5V/+12V Close 5-6 RI4 (Default) Close 7-8 +5V/+12V HSB-945P 2.13 COM3, COM4 Port Power Selection (COMV2) COMV2 Function Close 1-2 +12V Close 2-3 +5V (Default) 2.14 ATX Power Control Connector with BP (CN1) Pin Signal 1 PS_ON# 2 +5V 3 +5VSB 2.15 IrDA Connector (CN2) Pin Signal 1 +5V 2 N.C 3 IRRX 4 GND 5 IRTX 6 N.C 2.
Half-size SBC HSB-945P 3 In3/Out3 4 In4/Out4 5 In5/Out5 6 In6/Out6 7 In7/Out7 8 In8/Out8 9 +5V 10 GND 2.17 USB Connector (CN4, CN5) Pin Signal Pin Signal 1 +5V 2 GND 3 USBD1- 4 GND 5 USBD1+ 6 USBD2+ 7 GND 8 USBD2- 9 GND 10 +5V 2.18 DVI (CN6) Pin Signal Pin Signal 1 DVI_TD1 2 DVI_TD1# 3 GND 4 GND 5 DVI_TDC 6 DVI_TDC# 7 GND 8 VCC5 9 HPDET_C# 10 VCC5 11 DVI_TD2 12 DVI_TD2# 13 GND 14 GND 15 DVI_TD0 16 DVI_TD0# 17 N.C 18 N.
Half-size SBC HSB-945P 3 VLCD 4 GND 5 LA_CLK# 6 LA_CLK 7 VLCD 8 GND 9 LA_TX0# 10 LA_TX0 11 LA_TX1# 12 LA_TX1 13 LA_TX2# 14 LA_TX2 15 N.C 16 N.C 17 N.C 18 N.C 19 LB_TX0# 20 LB_TX0 21 LB_TX1# 22 LB_TX1 23 LB_TX2# 24 LB_TX2 25 N.C 26 N.C 27 VLCD 28 GND 29 LB_CLK# 30 LB_CLK 2.20 Internal Keyboard Connector (CN9) Pin Signal 1 KB_CLK 2 KB_DATA 3 N.C 4 GND 5 +5V 2.
Half-size SBC 5 HSB-945P BKL_EN 2.22 PS/2 Keyboard/Mouse Connector (CN11) Pin Signal 1 KB_DATA 2 MS-DATA 3 GND 4 +5V 5 KB_CLK 6 MS_CLK 2.23 Audio Pin Header (CN12) Pin Signal Pin Signal 1 ACZ_RST# 2 ACZ_SYNC 3 ACZ_SDIN 4 ACZ_SDOUT 5 GND 6 ACZ_BITCLK 7 GND 8 +5V 9 N.C 10 +3.3V 2.
Half-size SBC HSB-945P 2.25 Front Panel Connector (FP2) Pin Signal Pin Signal 1 External Speaker (+) 2 Key Board Lock (+) 3 N.C 4 GND 5 Internal Buzzer (-) (Default) 6 I2C Bus SMB Clock 7 External Speaker (-) (Default) 8 I2C Bus SMB Data Note: Internal Buzzer Enable: Close Pin 5,7 2.26 RS-232 Serial Port Connector (COM1) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 10 N.C 2.
Half-size SBC HSB-945P 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI or 5V/12V 10 N.C 2.29 LPT Port Connector (LPT1) Pin Signal Pin Signal 1 #STROBE 2 #AFD 3 DATA0 4 #ERROR 5 DATA1 6 #INIT 7 DATA2 8 #SLIN 9 DATA3 10 GND 11 DATA4 12 GND 13 DATA5 14 GND 15 DATA6 16 GND 17 DATA7 18 GND 19 #ACK 20 GND 21 BUSY 22 GND 23 PE 24 GND 25 SELECT 26 GND 2.
Half-size SBC HSB-945P Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2 - 18
Half-size SBC HSB-945P Chapter 3 Award BIOS Setup Chapter 3 Award BIOS Setup 3-1
Half-size SBC 3.1 HSB-945P System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors.
Half-size SBC 3.2 HSB-945P Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press immediately. This will allow you to enter Setup. Standard CMOS Features Use this menu for basic system configuration. (Date, time, IDE, etc.
Half-size SBC HSB-945P PC Health Status This menu allows you to set the shutdown temperature for your system. Load Fail-Safe Defaults Use this menu to load the BIOS default values for the minimal/stable performance for your system to operate. Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal performance system operations.
Half-size SBC HSB-945P Chapter 4 Driver Installation Chapter 4 Driver Installation 4-1
Half-size SBC HSB-945P The HSB-945P comes with a CD-ROM that contains all drivers your need. Follow the sequence below to install the drivers: Step 1 – Install INF Driver Step 2 – Install VGA Driver Step 3 – Install Audio Driver Step 4 – Install LAN Driver Please read following instructions for detailed installations.
Half-size SBC HSB-945P 4.1 Installation: Insert the HSB-945P CD-ROM into the CD-ROM Drive. And install the drivers from Step 1 to Step 4 in order. Step 1 – Install INF Driver 1. Click on the Step 1-INF folder and then double click on the Setup.exe 2. Follow the instructions that the window shows 3. The system will help you to install the driver automatically Step 2 – Install VGA Driver 1. Click on the Step 2-VGA folder and select the OS your system is 2. Double click on Setup.
Half-size SBC HSB-945P 3. Follow the instructions that the window shows 4.
Half-size SBC HSB-945P Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Half-size SBC HSB-945P A.1 Programming HSB-945P utilizes ITE 8712 chipset as its watchdog timer controller. ( K version ) Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description After the hardware reset or power-on reset, the ITE 8712 enters the normal mode with all logical devices disabled except KBC.
Half-size SBC HSB-945P (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state. To ensure the initial state of the key-check logic, it is necessary to perform four write opera-tions to the Special Address port (2EH). Two different enter keys are provided to select configuration ports (2Eh/2Fh) of the next step.
Half-size SBC Bit 7-2 1 0 HSB-945P Description Reserved Returns to the Wait for Key state. This bit is used when the configuration sequence is completed. Resets all logical devices and restores configuration registers to their power-on states.
Half-size SBC HSB-945P WatchDog Timer Time-out Value (LSB) Register (Index=73h, Default=00h) Bit 7-0 Description WDT Time-out value 7-0 WatchDog Timer Time-out Value (MSB) Register (Index=74h, Default=00h) Bit 7-0 Description WDT Time-out value 15-8 A.2 ITE8712 Watchdog Timer Initial Program .MODEL SMALL .
Half-size SBC HSB-945P mov cl, 73h call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
Half-size SBC HSB-945P MOV AL,BYTE PTR CS:[SI] OUT DX,AL INC SI LOOP Init_1 RET Enter_Configuration_Mode ENDP Exit_Configuration_Mode PROC NEAR MOV AX,0202h CALL Write_Configuration_Data RET Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial Appendix A Programming the Watchdog Timer A-7
Half-size SBC HSB-945P Need_Initial: STC RET Not_Initial: CLC RET Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX RET Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL RET Write_Configuration_Data ENDP Superio_Set_Reg proc near Appendix A Programming the Watchdog Timer A-8
Half-size SBC HSB-945P push ax MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al ret Superio_Set_Reg endp.
Half-size SBC END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 . .
Half-size SBC HSB-945P Appendix B I/O Information Appendix B I/O Information B-1
Half-size SBC B.
Half-size SBC HSB-945P B.
Half-size SBC B.3 IRQ Mapping Chart B.
Half-Size Board HSB-945P Appendix C Mating Connector Appendix C Mating Connector C - 1
Half-Size Board HSB-945P C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables.
Half-Size Board HSB-945P Connector ATX1 4P Power Connnector FAN1 FAN Connector USB1 USB Connector LAN1(-VE) Ethernet Connector LAN1(-G2) Ethernet Connector LAN2 Ethernet Connector CN2 IrDA Connector Catch Electronics Catch Electronics WING-SPA N WING-SPA N WING-SPA N WING-SPA N JIH VEI Electronics CN11 CONTEK CN9 COM1 Mini-Din PS/2 Connector KB Pin Header Serial Port Box Header COM2 Serial Port Box Header COM3 Serial Port Box Header COM4 Serial Port Box Header VGA1 CRT Display Connector LVDS
Half-Size Board CN6 DVI Connector Appendix C Mating Connector C - 4 HSB-945P Catch 1147-000-20 Electronics MP N/A
