Half-size SBC HSB-CV1P HSB-CV1P ® TM Intel Atom D2550/N2600 Processor 10/100/1000Base-TX Ethernet 2 SATA 3.0Gb/s PCI Interface Expansion 8 USB2.0, 4 COM 1 VGA, 1 LVDS HSB-CV1P Manual Rev. A 2nd Ed.
Half-size SBC HSB-CV1P Copyright Notice This document is copyrighted, 2013. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Half-size SBC HSB-CV1P Acknowledgments All other products’ name or trademarks are properties of their respective owners. AMI is a trademark of American Megatrends Inc. Intel®, Atom™ are trademarks of Intel® Corporation. Microsoft Windows® is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc. IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation. SoundBlaster is a trademark of Creative Labs, Inc.
Half-size SBC HSB-CV1P Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 HSB-CV1P CPU Card with Active Cooler (Intel® Atom™ D2550 version) or Passive Heatsink (Intel® Atom™ N2600 version) 1 CD-ROM for manual (in PDF format) and drivers 1 Jumpers 1 Cable Kit for HSB series 1 SATA Cable If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Half-size SBC HSB-CV1P Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................... 2-2 2.2 Location of Connectors and Jumpers ....................... 2-3 2.
Half-size SBC HSB-CV1P 2.18 RJ-45 Ethernet (CN6).............................................. 2-11 2.19 RJ-45 Ethernet (CN7).............................................. 2-11 2.20 External +5VSB Input Connector (CN8) ................. 2-11 2.21 HD Audio Codec with Realtek ALC888 (Optional) Connector (CN9) ............................................................. 2-12 2.22 USB Port #7 Connector (CN10) .............................. 2-12 2.23 Front Panel Connector 1 (FP1) .............................
Half-size SBC HSB-CV1P 2.42 DDR3 SODIMM Slot (DIMM1) ................................ 2-21 Chapter 3 AMI BIOS Setup 3.1 System Test and Initialization. .................................. 3-2 3.2 AMI BIOS Setup ........................................................ 3-3 Chapter 4 Driver Installation 4.1 Installation ................................................................. 4-3 Appendix A Programming The Watchdog Timer A.1 Programming .........................................................
Half-size SBC HSB-CV1P Chapter 1 General Information Chapter 1 General Information 1- 1
Half-size SBC HSB-CV1P 1.1 Introduction AAEON, a leading embedded boards manufacturer, is pleased to announce the debut of the new generation Half-size Single Board Computer—HSB-CV1P. HSB-CV1P adopts Intel® AtomTM D2550/ N2600 Processor. The system memory is deployed with 204-pin SODIMM DDR3 800/1066 up to 4 GB for Intel® AtomTM D2550 processor and up to 2 GB for Intel® AtomTM N2600 Processor. In addition, Realtek RTL8111E supports two 10/100/1000Base-TX that allow a faster network connection.
Half-size SBC HSB-CV1P 1.2 Features Onboard Intel® Atom™ D2550/ N2600 Processor Intel® NM10 DDR3 800 / 1066 SODIMM x 1, max. 4GB (D2550), 2GB (N2600) Intel® Graphics Media Accelerator Supports DirectX 10, OpenGL 3.0 HD Codec Audio Daughter Board (optional) Realtek RTL 8111E, Gigabit Ethernet, RJ-45 x 2 USB 2.0 x 8 (Pin header x 3, 2 xOnboard Type A connector x 2,One for Nano USB) COM x 4 (RS-232 x 3, RS-232/422/485 x 1) SATA 3.
Half-size SBC HSB-CV1P 1.3 Specifications System Processor Intel® Atom™ D2550/ N2600 processor, (1.86 GHz for D2550, 1.6 GHz for N2600) System Memory 204-pin DDR3 SODIMM x 1, Max. 4 GB (DDR3 800/1066) for Intel® Atom™D2550; Max.
Half-size SBC HSB-CV1P Power Requirement +12V, ATX Battery Lithium battery Board Size 7.3”(L) x 4.8”(W) (185mm x 122mm) Gross Weight Operating Temperature 32˚F~ 140˚F (0˚C ~ 60˚C) Storage Temperature -4˚F~ 158˚F (-20˚C ~ 70˚C) Operating Humidity 10%~80% relative humidity, 0.75 lb (0.35 Kg) non-condensing Display: Supports CRT/LCD, LVDS/LCD, simultaneous and dual view displays Chipset Intel® Graphics Media Accelerator supports DirectX 10, OpenGL 3.
Half-size SBC HSB-CV1P I/O Storage SATA 3.0Gb/s x 2 Serial Port COM x 4 (box header) COM2 : RS-232/422/485 (Box header 2.0mm) COM1, COM3, COM4 :RS-232 (Box header 2.0mm) Parallel Port SPP/EPP/ECP modes USB Port USB2.
Half-Size SBC HSB-CV1P Chapter 2 Quick Installation Guide Chapter 2 Quick Installation Guide 2-1
Half-Size SBC HSB-CV1P 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
Half-Size SBC HSB-CV1P 2.
Half-Size SBC HSB-CV1P 2.
Half-Size SBC HSB-CV1P 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: Label Function JP1 Clear CMOS JP2 LVDS Operating Voltage Selection JP3 LVDS Inverter/ Backlight Voltage Selection JP4 LVDS Inverter/ Backlight Bias/PWM Mode Selection JP5 AT/ATX Power Mode Selection JP6 COM2 RI/+5/+12V Selection 2.
Half-Size SBC HSB-CV1P FP2 Front Panel Connector 2 VGA1 Analog CRT Display Connector USB1 USB Port #0 and #1 Connector USB2 USB Port #2 and #3 Connector USB3 USB Port #4 and #5 Connector USB4 USB Port #6 Connector COM1 RS-232 Serial port1 Connector COM2 RS-232/422/485 Serial port2 Connector COM3 RS-232 Serial port3 Connector COM4 RS-232 Serial port4 Connector IR1 Infrared Connector LPT1 Parallel Port Connector SATA1 SATA Port 2 Connector SATA2 SATA Port 1 Connector SPI1 BIOS D
Half-Size SBC HSB-CV1P 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
Half-Size SBC HSB-CV1P 2.7 Clear CMOS (JP1) JP1 Function 1-2 Normal (Default) 3-4 Clear CMOS 2.8 LVDS Operating Voltage Selection (JP2) JP2 Function 1-2 +5V 2-3 +3.3V (Default) 2.9 LVDS Inverter/ Backlight Voltage Selection (JP3) JP3 Function 1-2 +12V 2-3 +5V (Default) 2.10 LVDS Inverter/ Backlight Bias/PWM Mode Selection (JP4) JP4 Function 1-2 Bias (Default) 2-3 PWM Control 2.
Half-Size SBC HSB-CV1P 2.12 COM2 RI/+5V/+12V Selection (JP6) JP6 Function 1-2 +12V 3-4 RI (Default) 5-6 +5V 2.13 LVDS Inverter/ Backlight Connector (CN1) Pin Signal 1 12V / 5V 2 VCON 3 GND 4 GND 5 INV_EN 2.
Half-Size SBC HSB-CV1P 15 LVDS1_DATA3# 16 LVDS1_DATA3 17 LVDS_DDC_DATA 18 LVDS_DDC_CLK 19 LVDS2_DATA0# 20 LVDS2_DATA0 21 LVDS2_DATA1# 22 LVDS2_DATA1 23 LVDS2_DATA2# 24 LVDS2_DATA2 25 LVDS2_DATA3# 26 LVDS2_DATA3 27 LVDSVCC 28 GND 29 LVDS2_CLK# 30 LVDS2_CLK 2.15 Keyboard Connector (CN3) Pin Signal 1 KB_CLK 2 KB_DATA 3 N.C. 4 GND 5 +5V 2.
Half-Size SBC HSB-CV1P 2.17 Digital I/O Connector (CN5) Pin Signal Pin Signal 1 IN0 2 IN1 3 IN2 4 IN3 5 OUT0 6 OUT1 7 OUT2 8 OUT3 9 +3.3V 10 GND 2.18 RJ-45 Ethernet (CN6) Standard specification 2.19 RJ-45 Ethernet (CN7) Standard specification 2.
Half-Size SBC HSB-CV1P 2.21 HD Audio Codec with Realtek ALC888 (Optional) Connector (CN9) Pin Signal Pin Signal 1 RST 2 SYNC 3 SDIN 4 SDOUT 5 DET 6 BCLK 7 GND 8 +5V 9 NC 10 +3.3V 2.
Half-Size SBC HSB-CV1P 2.23 Front Panel Connector 1 (FP1) Pin Signal Pin Signal 1 Power On Button (+) 2 Reset Switch (+) 3 Power On Button (-) 4 Reset Switch (-) 5 HDD LED (+) 6 Power LED (+) 7 HDD LED (-) 8 Power LED (-) 2.24 Front Panel Connector 2 (FP2) Pin Signal Pin Signal 1 External Speaker (+) 2 NC 3 NC 4 NC 5 Internal Buzzer (-) 6 I2C Bus SMB Clock 7 External Speaker (-) 8 I2C Bus SMB Data 2.
Half-Size SBC HSB-CV1P 2.26 USB Port #0 and #1 Connector (USB1) Pin Signal Pin Signal 1 +5VSB 2 GND 3 USB0N 4 GND 5 USB0P 6 USB1P 7 GND 8 USB1N 9 GND 10 +5V_USB 2.
Half-Size SBC HSB-CV1P 2.28 USB Port #4 and #5 Connector (USB3) Pin Signal Pin Signal 1 +5VSB 2 GND 3 USB4N 4 GND 5 USB4P 6 USB5P 7 GND 8 USB5N 9 GND 10 +5V_USB 2.29 USB Port #6 Connector (USB4) 1 2 3 4 Pin Signal 1 +5VSB 2 USB6N 3 USB6P 4 GND 2.
Half-Size SBC HSB-CV1P Pin Signal Pin Signal 1 DCD1 2 RXD1 3 TXD1 4 DTR1 5 GND 6 DSR1 7 RTS1 8 CTS1 9 RI1 10 NC 2.
Half-Size SBC HSB-CV1P 3 TXD+ 4 RXD- 5 GND 6 NC 7 NC 8 NC 9 NC/+5V/+12V 10 NC 2.32 RS-232 Serial port3 Connector (COM3) Pin Signal Pin Signal 1 DCD3 2 RXD3 3 TXD3 4 DTR3 5 GND 6 DSR3 7 RTS3 8 CTS3 9 RI3 10 NC 2.33 RS-232 Serial port4 Connector (COM4) Pin Signal Pin Signal 1 DCD4 2 RXD4 3 TXD4 4 DTR4 5 GND 6 DSR4 7 RTS4 8 CTS4 9 RI4 10 NC 2.
Half-Size SBC Pin Signal 1 +5V 2 NC 3 IRRX 4 GND 5 IRTX 6 NC HSB-CV1P 2.
Half-Size SBC HSB-CV1P 2.36 SATA Port2 Connector (SATA1) Pin 1 Pin 7 Pin Signal 1 GND 2 SATA_TX+ 3 SATA_TX- 4 GND 5 SATA_RX- 6 SATA_RX+ 7 GND 2.
Half-Size SBC HSB-CV1P 2.38 BIOS Debug Port (SPI1) Pin Signal Pin Signal 1 +3.3V 2 GND 3 SPI_CE# 4 SPI_CLK 5 SPI_SO 6 SPI_SI 7 SPI_HOLD# 8 NC 2.39 3-Pin CPU Fan Connector (4-Pin Optional) (FAN1) Pin Signal 1 GND 2 +12V 3 FAN_TAC 4 FAN_CTL (Optional) 2.
Half-Size SBC 2 +12V 3 FAN_TAC 4 FAN_CTL HSB-CV1P 2.41 4-Pin ATX Power Connector (ATX1) Pin Signal Pin Signal 1 GND 2 GND 3 +12V 4 +12V 2.
Half-Size SBC HSB-CV1P Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2-22
Half-size SBC HSB-CV1P Chapter 3 AMI BIOS Setup Chapter 3 AMI BIOS Setup 3-1
Half-size SBC HSB-CV1P 3.1 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors. System configuration verification These routines check the current system configuration stored in the CMOS memory and BIOS NVRAM.
Half-size SBC HSB-CV1P 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM and BIOS NVRAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press or immediately. This will allow you to enter Setup. Main Set the date, use tab to switch between date elements.
Half-size SBC Setup Menu Setup submenu: Main Chapter 3 AMI BIOS Setup 3-4 HSB-CV1P
Half-size SBC HSB-CV1P Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-5
Half-size SBC HSB-CV1P ACPI Settings Options Summary : ACPI Sleep State S3 Only (Suspend to RAM) Default Suspend Disabled Select ACPI sleep state the system will enter when the SUSPEND button is pressed.
Half-size SBC HSB-CV1P S5 RTC Wake Settings Options Summary : Wake system with Disabled Fixed Time Default Enabled Enable or disable System wake on alarm event. When enabled, System will wake on the hr::min::sec specified. Wake system with Disabled Dynamic Time Default Enabled Enable or disable System wake on alarm event. When enabled, System will wake on the current time + Increase minute(s).
Half-size SBC HSB-CV1P CPU Configuration Options Summary : Hyper-Threading Disabled Enabled Default Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.
Half-size SBC HSB-CV1P SATA Configuration (IDE) Options summary : SATA Controller(s) Enabled Default Disabled Enable or disable SATA device. SATA Mode Selection IDE Default AHCI Determines how SATA controller(s) operate.
Half-size SBC HSB-CV1P SATA Configuration (AHCI) Options summary : SATA Port 0 Disable Enabled Default Enable or Disable SATA Port. SATA Port 0 Hot Plug Disable Enabled Default Designates this port as Hot Pluggable. SATA Port 1 Disable Enabled Default Enable or Disable SATA Port. SATA Port 1 Hot Plug Disable Enabled Designates this port as Hot Pluggable.
Half-size SBC HSB-CV1P USB Configuration Options summary : Legacy USB Support Enabled Default Disabled Auto Enable Legacy USB support. Auto option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications.
Half-size SBC HSB-CV1P F81866 Super IO Configuration Options Summary : Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA) Serial Port 2 Configuration Set Parameters of Serial Port 2 (COMB) Serial Port 3 Configuration Set Parameters of Serial Port 3 (COMC) Serial Port 4 Configuration Set Parameters of Serial Port 4 (COMD) IrDA Configuration Set Parameters of IrDA Parallel Port Configuration Set Parameters of Parallel Port (LPT) Power Failure Power Off Default Power On Last State Selec
Half-size SBC HSB-CV1P Serial Port 1 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default IO=3F8h; IRQ=4 IO=3F8h; IRQ=3, 4 IO=2F8h; IRQ=3, 4 Select an optimal setting for Super IO device.
Half-size SBC HSB-CV1P Serial Port 2 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto IO=2F8h; IRQ=3 IO=3F8h; IRQ=3, 4 IO=2F8h; IRQ=3, 4 Chapter 3 AMI BIOS Setup 3-14 Default
Half-size SBC HSB-CV1P Select an optimal setting for Super IO device. Device Mode RS-232 Default RS-422 RS-485 Change the Serial Port mode. Select or or mode.
Half-size SBC HSB-CV1P Serial Port 3 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto IO=3E8h; IRQ=11 IO=2E8h; IRQ=11 Select an optimal setting for Super IO device.
Half-size SBC HSB-CV1P Serial Port 4 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default IO=2E8h; IRQ=11 IO=3E8h; IRQ=11 Select an optimal setting for Super IO device.
Half-size SBC HSB-CV1P IrDA Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto IO=2C0h; IRQ=11 IO=2C8h; IRQ=11 Select an optimal setting for Super IO device.
Half-size SBC Device Mode HSB-CV1P Disable IR1 function Enable IR1 Default function, active pulse 1.6uS Enable IR1 function, active pulse 3/16 bit time Select an optimal setting for Super IO device.
Half-size SBC HSB-CV1P Parallel Port Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Parallel Port (LPT/LPTE) Change Settings Auto Default IO=378h; IRQ=5 IO=378h; IRQ=5,6,7,10,11,12 IO=278h; IRQ=5,6,7,10,11,12 IO=3BCh; IRQ=5,6,7,10,11,12 Select an optimal setting for Super IO device.
Half-size SBC HSB-CV1P IO=378h; IRQ=5 ; DMA=3 IO=378h; IRQ=5,6,7,10,11,12;DMA=1,3 IO=278h; IRQ=5,6,7,10,11,12;DMA=1,3 IO=3BCh; IRQ=5,6,7,10,11,12;DMA=1,3 Select an optimal setting for Super IO device. Change Settings Auto Default IO=378h; IRQ=5 ; DMA=3 IO=378h; IRQ=5,6,7,10,11,12;DMA=1,3 IO=278h; IRQ=5,6,7,10,11,12;DMA=1,3 IO=3BCh; IRQ=5,6,7,10,11,12;DMA=1,3 Select an optimal setting for Super IO device. Device Mode STD Printer Mode Default SPP Mode EPP-1.9 and SPP Mode EPP-1.
Half-size SBC F81866 H/W Monitor Chapter 3 AMI BIOS Setup 3-22 HSB-CV1P
Half-size SBC HSB-CV1P Smart Fan Mode Configuration Options Summary : Fan 1 Confinguration Set Parameters of Fan 1 Fan 2 Confinguration Set Parameters of Fan 2 Chapter 3 AMI BIOS Setup 3-23
Half-size SBC HSB-CV1P CPU Fan Confinguration Options Summary : CPU Smart Fan Control Auto by RPM Default Auto by Duty-Cycle Manual by RPM Manual by Duty-Cycle Smart Fan Mode settting Target Temp. Sensor CPU Temperature SYS Temperature Select the target temperature sensor.
Half-size SBC Temperature Bound 2 Default 50 Temperature Bound 3 Default 40 Temperature Bound 4 Default 30 Segment 1 Speed (%) Default 100 Segment 2 Speed (%) Default 85 Segment 3 Speed (%) Default 70 Segment 4 Speed (%) Default 60 Full Speed Count Default 3000 Segment 1 Speed (PWM) Default 100 Segment 2 Speed (PWM) Default 85 Segment 3 Speed (PWM) Default 70 Segment 4 Speed (PWM) Default 60 HSB-CV1P Chapter 3 AMI BIOS Setup 3-25
Half-size SBC HSB-CV1P SYS Fan Confinguration Options Summary : SYS Smart Fan Control Auto by RPM Auto by Duty-Cycle Default Manual by RPM Manual by Duty-Cycle Smart Fan Mode settting Target Temp. Sensor CPU Temperature SYS Temperature Select the target temperature sensor.
Half-size SBC Temperature Bound 2 Default 50 Temperature Bound 3 Default 40 Temperature Bound 4 Default 30 Segment 1 Speed (%) Default 100 Segment 2 Speed (%) Default 85 Segment 3 Speed (%) Default 70 Segment 4 Speed (%) Default 60 Full Speed Count Default 3000 HSB-CV1P Segment 1 Speed (PWM) Default 100 Segment 2 Speed (PWM) Default 85 Segment 3 Speed (PWM) Default 70 Segment 4 Speed (PWM) Default 60 Chapter 3 AMI BIOS Setup 3-27
Half-size SBC HSB-CV1P Digital IO Options Summary : DIO_P#1 Input Default Output Set Digital IO as Input or Output DIO_P#1 Direction Low Default Hi Set Digital IO Level as Low or Hi DIO_P#2 Input Output Set Digital IO as Input or Output Chapter 3 AMI BIOS Setup 3-28 Default
Half-size SBC DIO_P#2 Direction Low HSB-CV1P Default Hi Set Digital IO Level as Low or Hi DIO_P#3 Input Default Output Set Digital IO as Input or Output DIO_P#3 Direction Low Default Hi Set Digital IO Level as Low or Hi DIO_P#4 Input Default Output Set Digital IO as Input or Output DIO_P#4 Direction Low Default Hi Set Digital IO Level as Low or Hi DIO_P#5 Input Output Default Set Digital IO as Input or Output DIO_P#5 Direction Low Hi Default Set Digital IO Level as Low or Hi DIO_P#6
Half-size SBC DIO_P#6 Direction HSB-CV1P Low Hi Default Set Digital IO Level as Low or Hi DIO_P#7 Input Output Default Set Digital IO as Input or Output DIO_P#7 Direction Low Hi Default Set Digital IO Level as Low or Hi DIO_P#8 Input Output Default Set Digital IO as Input or Output DIO_P#8 Direction Low Hi Set Digital IO Level as Low or Hi Chapter 3 AMI BIOS Setup 3-30 Default
Half-size SBC HSB-CV1P Setup submenu: Chipset Chapter 3 AMI BIOS Setup 3-31
Half-size SBC Host Bridge Chapter 3 AMI BIOS Setup 3-32 HSB-CV1P
Half-size SBC HSB-CV1P Intel IGD Configuration Options Summary : IGFX – Boot Type VBIOS Default Default CRT LVDS Select the Video Device which will be activated during POST. This has no effect if external graphics present.
Half-size SBC HSB-CV1P 1024x600,18bit,60Hz 1024x768,18bit,60Hz 1024x768,24bit,60Hz 1280x768,24bit,60Hz 1366x768,24bit,60Hz Select LCD panel used by Internal Graphics Device by selecting the appropriate setup item. Active LFP No LVDS LVDS Default EDP Select the Active LFP Configuration. No LVDS:VBIOS does not enable LVDS. Int-LVDS:VBIOS enables LVDS driver by Integrated encoder. SDVO LVDS:VBIOS enables LVDS driver by SDVO encoder. eDP Port-A:LFP Driven by Int-DisplayPort encoder from Port-A.
Half-size SBC HSB-CV1P 20% 10% 0% Select Backlight brightness of LVDS. Backlight Control PWM Inverted PWM Normal Default Back Light Control Setting Fixed Graphics Memory 128MB Size 256MB Default Configure Fixed Graphics Memory Size.
Half-size SBC HSB-CV1P South Bridge Options Summary : Azalia Controller Disabled HD Audio Default Azalia Controller. Select USB Mode By Port By Controller Select USB mode to control USB ports.
Half-size SBC HSB-CV1P 3 USB Ports 4 USB Ports 5 USB Ports 6 USB Ports 7 USB Ports 8 USB Ports Default Enable / Disable USB Function. UHCI #1 (ports 0 and 1) Disabled Enabled Default Control the USB UHCI (USB 1.1) functions. Disable from highest to lowest controller. UHCI #1 (ports 2 and 3) Disabled Enabled Default Control the USB UHCI (USB 1.1) functions. Disable from highest to lowest controller. UHCI #1 (ports 4 and 5) Disabled Enabled Default Control the USB UHCI (USB 1.1) functions.
Half-size SBC Enabled Enable or Disable USB 2.0 (EHCI) Support.
Half-size SBC HSB-CV1P Setup submenu: Boot Options summary : Bootup NumLock State On Off Select keyboard NumLock State. Quiet Boot Disabled Enabled Default Enables or disables Quiet Boot option.
Half-size SBC Boot Option Priorities Options Summary : Boot Option #X Your device Your device Sets the system boot order Chapter 3 AMI BIOS Setup 3-40 HSB-CV1P
Half-size SBC HSB-CV1P Setup submenu: Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility. If you highlight these items and press Enter, a dialog box appears which lets you enter a password. You can enter no more than six letters or numbers. Press Enter after you have typed in the password.
Half-size SBC Setup submenu: Exit Chapter 3 AMI BIOS Setup 3-42 HSB-CV1P
Half-size SBC HSB-CV1P Chapter 4 Driver Installation Chapter 4 Driver Installation 4 - 1
Half-size SBC HSB-CV1P The HSB-CV1P comes with a CD-ROM that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: Step 1 – Install Chipset Driver Step 2 – Install VGA Driver Step 3 – Install LAN Driver Step 4 – Install Audio Driver Step 5 – Install Serial Port Driver (Optional) Step 6 – Install AHCI Driver Step 7 – Install Rapid Storage Technology Driver Please read instructions below for further detailed installations.
Half-size SBC HSB-CV1P 4.1 Installation: Insert the HSB-CV1P CD-ROM into the CD-ROM Drive. And install the drivers from Step 1 to Step 7 in order. Step 1 – Install Chipset Driver 1. Click on the STEP1 - CHIPSET folder and double click on the infinst_autol.exe file 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 2 – Install VGA Driver 1. Click on the STEP2 - VGA folder and select the OS folder your system is 2. Double click on the .
Half-size SBC HSB-CV1P Follow the instructions that the window shows The system will help you install the driver automatically Chapter 4 Driver Installation 4 - 4
Half-size SBC HSB-CV1P Chapter 4 Driver Installation 4 - 5
Half-size SBC HSB-CV1P If you want to update driver, please uninstall driver first. Uninstall IEMGD 1. Double click on the IEMGDInstall.exe 2. Follow the instructions that the window shows 3. The system will help you uninstall the driver automatically Step 3 – Install LAN Driver 1. Click on the STEP3 - LAN folder and select the OS folder your system is 2. Double click on the setup.exe file located in each OS folder 3. Follow the instructions that the window shows 4.
Half-size SBC HSB-CV1P 2. Double click on the .exe file located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 5 – Install Serial Port Driver (Optional) For Windows XP 32-bit 1. Click on the STEP5 - Serial Port Driver (Optional) folder and click on the folder of WINXP_32 2. Double click on the patch.bat file 3. Follow the instructions that the window shows 4.
Half-size SBC HSB-CV1P 2. Change User Account Control Settings to [Never notify] 3. Reboot and Administrator login.
Half-size SBC HSB-CV1P 4. To run patch.bat with [Run as administrator]. You also can install the serial port driver for Windows 7 by the Installation Procedure 2 below: -Win7 32-bit Copy the Driver CD\Serial Port Driver (Optional)\WIN7_32\win7_X86\serial.sys to C:\WINDOWS\system32\drivers\ -Win7 64-bit Copy the Driver CD\Serial Port Driver (Optional)\WIN7_64\win7_amd64\serial.
Half-size SBC HSB-CV1P Step 6 – Install AHCI Driver Please refer to Appendix D AHCI Setting Step 7 – Install Rapid Storage Technology Driver 1. Click on the STEP7 - Rapid Storage Technology folder and select the OS folder your system is 2. Double click on the setup.exe file located in each OS folder 3. Follow the instructions that the window shows 4.
Half-size SBC HSB-CV1P Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Half-size SBC HSB-CV1P A.1 Programming HSB-CV1P utilizes FINTEK 81866 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON initial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description After the hardware reset or power-on reset, the FINTEK 81866 enters the normal mode with all logical devices disabled except KBC.
Half-size SBC HSB-CV1P There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited normally. (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
Half-size SBC HSB-CV1P Watch Dog Timer 1, 2, 3 Control Register (Index=F5h,F6h,FAh Default=00h) Appendix A Programming the Watchdog Timer A-4
Half-size SBC HSB-CV1P A.
Half-size SBC HSB-CV1P Void aaeonWdtSetTimeoutCount(BYTE tTimeout){ f81866SetLdn(0x07); f81866WriteByte(F81866_WDT_TIME_REG, tTimeout); } Void aaeonWdtSetEnable(BOOL bEnable){ f81866SetLdn(0x07); if(bEnable){ f81866WriteByte(0x30, 0x01); WDT_BASE_ADDR = (f81866ReadByte(F81866_WDT_BASEADDR_REG_MSB) << 8) | f81866ReadByte(F81866_WDT_BASEADDR_REG_LSB); WDT_STATUS = f81866ReadByte(F81866_WDT_CONTROL_REG); f81866WriteByte(F81866_WDT_CONTROL_REG, WDT_STATUS | 0x20); WDT_STATUS = f81866ReadByte(F81866_WDT_PME_R
Half-size SBC HSB-CV1P Void aaeonSuperIOClose(){ aaeonioWritePortByte(F81866_INDEX, 0xaa); } Appendix A Programming the Watchdog Timer A-7
Half-size SBC HSB-CV1P Appendix B I/O Information Appendix B I/O Information B - 1
Half-size SBC B.
Half-size SBC HSB-CV1P Appendix B I/O Information B - 3
Half-size SBC B.
Half-size SBC HSB-CV1P B.
Half-size SBC Appendix B I/O Information B - 6 HSB-CV1P
Half-size SBC HSB-CV1P B.
Half-size SBC HSB-CV1P Appendix C Mating Connector Appendix C Mating Connector C - 1
Half-size SBC HSB-CV1P C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Label CN1 CN2 CN3 CN4 CN5 CN6 CN7 CN8 CN9 FP1 FP2 VGA1 Mating Connector Vendor Model No. Available Cable CATCH 1192-700-05S N/A N/A E-Call 01 10-01-553-300 N/A N/A HoBase 2503-WS-5 N/A N/A TechBest DN508BS1-6-L KB/MS Cable 1700060192 JIH VEI Electronics 21B22050-XXS 10B-01G-4/2.
Half-size SBC COM1 COM2 COM3 COM4 USB1 USB2 USB3 USB4 USB5 IR1 LPT1 SATA1 SATA2 SPI1 BAT1A1 FAN1 FAN2 Connector RS-232 Serial Port Connector RS-232/4 22/485 Serial Port Connector RS-232 Serial Port Connector RS-232 Serial Port Connector USB Pin Header USB Pin Header USB Pin Header USB Connector USB Connector Infrared Connector LPT port Connector SATA Connector SATA Connector BIOS Debug Port Connector BAT Pin Header FAN Connector FAN Connector HSB-CV1P CATCH 1147-000-10S Serial Port Cable 1701100
Half-size SBC ATX1 ATX Power Connector Appendix C Mating Connector C - 4 CATCH HSB-CV1P 1121-700-04S N/A N/A
Half-size SBC HSB-CV1P Appendix D AHCI Setting Appendix D AHCI Setting D-1
Half-size SBC HSB-CV1P D.1 Setting AHCI OS installation to setup AHCI Mode.
Half-size SBC HSB-CV1P Step 4: Press “F6” Step 5: Choose “S” Appendix D AHCI Setting D-3
Half-size SBC HSB-CV1P Step 6: Choose “Intel(R) NM10 Express Chipset” Step 7: It will show the model number you select and then press “ENTER Step 8: Setup is loading files Appendix D AHCI Setting D-4
