Industrial Motherboard IMBA-Q77 IMBA-Q77 Intel® 3rd Generation CoreTM i3/i5/i7 Processor DDR3 1066/1333 MHz DIMM 2 SATA 6.0Gb/s, 4 SATA 3.0Gb/s 1 PCI-Express[x16], 1 PCI-Express[x4] 2 PCI-Express[x1], 3 PCI 4 USB3.0, 8 USB2.0, 6 COM, 1 LPT VGA, 1 DVI-D, 2 DisplayPort™ nd IMBA-Q77 Manual Rev.A 2 Ed.
Industrial Motherboard IMBA-Q77 Copyright Notice This document is copyrighted, 2013. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Industrial Motherboard IMBA-Q77 Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™ is a trademark of the Compact Flash Association. Intel is a trademark of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc.
Industrial Motherboard IMBA-Q77 Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 IMBA-Q77 ATX Main Board 2 SATA Cable 1 COM Port Cable 1 USB2.0 Cable 1 DVD-ROM for Manual (in PDF Format) and Drivers 1 IO Shield for IMBA-Q77 main board If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Industrial Motherboard IMBA-Q77 Contents Chapter 1 General Information 1.1 Introduction ................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................... 2-2 2.2 Location of Connectors and Jumpers .......................
Industrial Motherboard Chapter 3 IMBA-Q77 AMI BIOS Setup 3.1 System Test and Initialization. .................................. 3-2 3.2 AMI BIOS Setup ........................................................ 3-3 Chapter 4 Driver Installation 4.1 Installation ................................................................. 4-3 Appendix A Programming The Watchdog Timer A.1 Programming .........................................................A-2 A.2 W83627DHG Watchdog Timer Initial Program ......
Industrial Motherboard IMBA-Q77 Chapter 1 General Information Chapter 1 General Information 1- 1
Industrial Motherboard IMBA-Q77 1.1 Introduction The IMBA-Q77 supports Intel® 3rd generation CoreTM i3/i5/i7 LGA1155 processor. Moreover it supports DDR3 1066/1333/1600MHz (1600 for 3rd generation Core i processors) memory up to 32GB. This model accommodates two Intel® Gigabit Ethernet controllers that those are controlled by Intel® 82579 (supports Intel® iAMT 8.0)and Intel® 82583V. This configuration provides outstanding computing ability, fast network connections and multi-task data transmission.
Industrial Motherboard IMBA-Q77 1.2 Features Intel® 3rd Generation Core™ i7/ i5/ i3 LGA 1155 Processor Intel® Q77 Dual-Channel DDR3 1066/1333/1600 DIMM (1600 for 3rd Generation Core™ i Processors) x 4, Up to 32 GB 10/100/1000Base-TX x 2 (LAN1 Supports Intel® iAMT 8.0) Three Independent Displays For 3rd Generation Core™ i Processors With VGA, DisplayPort™, DVI-D SATA 3.0Gb/s x 4, SATA 6.0Gb/s x 2, Support RAID 0,1,5,10 USB2.0 x 8, USB3.
Industrial Motherboard IMBA-Q77 1.3 Specifications System Form Factor ATX Processor Intel® 3rd generation Core™ i3/i5/i7 LGA 1155 Processor System Memory Dual Channel DDR3 1066/1333/1600MHz DIMM (1600 for 3rd Generation Core™ i Processors) x 4, up to 32 GB, Unbuffered memory Chipset Intel® Q77 Ethernet Gigabit Ethernet, RJ-45 x 2 LAN1: Intel® 82579 (supports Intel® iAMT 8.
Industrial Motherboard IMBA-Q77 1.2 onboard (optional) Power Requirement ATX standard 24-pin connector x 1, 4-pin +12V connector x 1, CPU fan x 1, system fan x 1 with 4-pin wafer, supports SMART FAN control Operating Temperature 32°F ~140°F (0°C ~60°C) Storage Temperature -4°F ~158°F (-20°C ~70°C) Storage Humidity 5%~90%, non-condensing Board Size (L x W) 12" x 9.6" (305 x 244 mm) Gross Weight 1.76(0.
Industrial Motherboard IMBA-Q77 I/O: Winbond W83627DHG-P + Fintek F81216AD Storage SATA 3.0 Gb/s x 4, SATA 6.0 Gb/s x 2, support RAID 0,1,5,10 Serial Port COM x 6 (box header x 5, external DB-9 x 1), COM1: RS-232/422/485 (external DB-9) COM2~6: RS-232 (box header) Keyboard & Mouse Keyboard x 1, Mouse x 1 Universal Serial Bus USB2.0 x 8, USB3.
Industrial Motherboard IMBA-Q77 Chapter 2 Quick Installation Guide Chapter 2 Quick Installation Guide 2 - 1
Industrial Motherboard IMBA-Q77 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
Industrial Motherboard IMBA-Q77 2.
Industrial Motherboard Solder Side Chapter 2 Quick Installation Guide 2 - 4 IMBA-Q77
Industrial Motherboard IMBA-Q77 2.
Industrial Motherboard Solder Side Chapter 2 Quick Installation Guide 2 - 6 IMBA-Q77
Industrial Motherboard IMBA-Q77 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
Industrial Motherboard IMBA-Q77 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
Industrial Motherboard IMBA-Q77 DIMM2 DDR3 DIMM Slot DIMM3 DDR3 DIMM Slot DIMM4 DDR3 DIMM Slot AUDIO1 AUDIO Connector CPU_FAN1 4-Pin Fan Connector CHASSIS_FAN1 4-Pin Fan Connector SYS_FAN1 4-Pin Fan Connector CN2 DVI-D / COM1 RS232/422/485 DP1 Display Port1 DP2/HDMI1 Display Port2 / HDMI KBMS1 PS/2 KB / MS ATX1 4 PIN ATX 12V ATX2 ATX Connector PCIE_1 PCI-E [x16] Connector PCIE_2 PCI-E [x4] Connector PCIE_3 PCI-E [x1] Connector PCIE_4 PCI-E [x1] Connector PCI1 PCI Connect
Industrial Motherboard IMBA-Q77 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
Industrial Motherboard IMBA-Q77 2.7 Clear CMOS (JP1) JP1 Function 1-2 Protected (Default) 2-3 Clear 2.8 Auto Power Button(JP3) JP3 Function 1-2 Power ON by Button (Default) 2-3 Auto Power ON 2.9 Front Panel Connector (FP1) Pin Signal Pin Signal 1 Power On Button (+) 2 Reset Switch (+) 3 Power On Button (-) 4 Reset Switch (-) 5 HDD LED (+) 6 Power LED (+) 7 HDD LED (-) 8 Power LED (-) 2.
Industrial Motherboard IMBA-Q77 2.11 RS-232 Serial Port Connector (COM2, 3, 4, 5, 6) Pin Signal Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 2.12 IR Pin Header (IR1) Pin Signal 1 +5V 2 NC 3 RX 4 GND 5 TX 2.13 Digital I/O Pin Header (DIO1) Pin Signal Pin Signal 1 DIO_30 2 DIO_31 3 DIO_32 4 DIO_33 5 DIO_34 6 DIO_35 7 DIO_36 8 DIO_37 9 +3.
Industrial Motherboard IMBA-Q77 2.14 VGA Port PIN Header (CN5) Pin Signal Pin Signal 1 VGA_RED_C 2 V_VDO_5V 3 VGA_GRE_C 4 GND 5 VGA_BLE_C 6 NC 7 NC 8 VDO_MONID1_R 9 GND 10 V_HSYNC 11 GND 12 V_VSYNC 13 GND 14 VDO_MONID2_R 15 GND 16 NC 2.15 USB2.0 Pin header (USB1~USB3) Pin Signal Pin Signal 1 +5V 2 GND 3 USBD- 4 GND 5 USBD+ 6 USBD+ 7 GND 8 USBD- 9 GND 10 +5V 2.16 USB3.
Industrial Motherboard IMBA-Q77 3 USB3_RX1_DP_C 18 USB3_RX2_DN_C 4 GND 17 USB3_RX2_DP_C 5 USB3_TX1_DN_C 16 GND 6 USB3_TX1_DP_C 15 USB3_TX2_DN_C 7 GND 14 USB3_TX2_DP_C 8 USBP_0N_C 13 GND 9 USBP_0P_C 12 USBP_1N_C 10 NC 11 USBP_1P_C 2.
Industrial Motherboard IMBA-Q77 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2 - 15
Industrial Motherboard IMBA-Q77 Chapter 3 AMI BIOS Setup Chapter 3 AMI BIOS Setup 3-1
Industrial Motherboard IMBA-Q77 3.1 System Test and Iinitialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors. System configuration verification These routines check the current system configuration stored in the CMOS memory and BIOS NVRAM.
Industrial Motherboard IMBA-Q77 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM and BIOS NVRAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press or immediately. This will allow you to enter Setup. Main Set the date, use tab to switch between date elements.
Industrial Motherboard Setup Menu Setup submenu: Main Chapter 3 AMI BIOS Setup 3-4 IMBA-Q77
Industrial Motherboard IMBA-Q77 Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-5
Industrial Motherboard IMBA-Q77 ACPI Settings Options Summary : ACPI Sleep State S1 only(CPU Stop Clock) S3 only(Suspend to RAM) Default Select the ACPI sleep state the system will enter when the SUSPEND button is pressed.
Industrial Motherboard IMBA-Q77 S5 RTC Wake Settings Options Summary : Wake system with Disabled Default Fixed Time Enabled Enable or disable System wake on alarm event. When enabled, System will wake on the hr::min::sec specified. Wake system with Disabled Default Dynamic Time Enabled Enable or disable System wake on alarm event. When enabled, System will wake on the current time + Increase minute(s).
Industrial Motherboard IMBA-Q77 Trusted Computing Options Summary : Security Device Disable Default Support Enable Enables or Disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.
Industrial Motherboard IMBA-Q77 CPU Configuration Options Summary : Intel Virtualization Disabled Disabled Technology Enabled When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology Chapter 3 AMI BIOS Setup 3-9
Industrial Motherboard IMBA-Q77 Digital IO Options Summary : DIO_P#1 Input Output DIO_P#2 Input Output DIO_P#3 Input Output DIO_P#4 Input Output DIO_P#5 Input Output DIO_P#5 Direction Low Hi DIO_P#6 Input Output DIO_P#6 Direction Low Hi DIO_P#7 Input Output DIO_P#7 Direction Low Hi Chapter 3 AMI BIOS Setup 3-10 Default Default Default Default Default Default Default Default Default Default
Industrial Motherboard Input Output DIO_P#8 Direction Low Hi Set GPIO Output as Hi or Low IMBA-Q77 DIO_P#8 Default Default Chapter 3 AMI BIOS Setup 3-11
Industrial Motherboard IMBA-Q77 SATA Configuration (IDE) Options Summary : SATA Controller(s) Enabled Disabled Enable or disable SATA Device. SATA Mode IDE Selection AHCI RAID Determines how SATA controller(s) operate.
Industrial Motherboard IMBA-Q77 SATA Configuration (AHCI&RAID) Chapter 3 AMI BIOS Setup 3-13
Industrial Motherboard IMBA-Q77 Options Summary : SATA Controller(s) Enabled Default Disabled Enable or disable SATA Device. SATA Mode IDE Default Selection AHCI RAID Determines how SATA controller(s) operate. SATA Controller Gen1 Speed Gen2 Gen3 Default Indicates the maximum speed the SATA controller can support. Pot 0 ~ Port 5 Disabled Enabled Default Enable or Disable SATA Port Serial ATA Port 0 ~ Disabled Default Port 5 Hot Plug Enabled Designates this port as Hot Pluggable.
Industrial Motherboard IMBA-Q77 Intel AMT Configuration Options Summary : Intel AMT Disabled Enabled Default Enable/Disable Intel ® Active Management Technology BIOS Extension. Note : iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device Un-Configure ME Disabled Default Enabled OEMFlag Bit 15: Un-Configure ME without password.
Industrial Motherboard IMBA-Q77 USB Configuration Options Summary : Legacy USB Support Enabled Default Disabled Auto Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications.
Industrial Motherboard IMBA-Q77 W83627DHG Super IO Configuration Options Summary : Serial Port 1 Configuration Serial Port 2 Configuration Parallel Port Configuration Set Parameters of Serial Port 1 (COMA) Set Parameters of Serial Port 2 (COMB) Set Parameters of Parallel Port (LPT/LPTE) Chapter 3 AMI BIOS Setup 3-17
Industrial Motherboard IMBA-Q77 Serial Port 1 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Select working RS232 Default model RS422 RS485 Select working model Change Settings Auto Default IO=3F8h;IRQ=4; IO=3F8h; IRQ=3,4; IO=2F8h; IRQ=3,4; IO=3E8h; IRQ=3,4; IO=2E8h; IRQ=3,4; Select an optimal setting for Super IO device.
Industrial Motherboard IMBA-Q77 Serial Port 2 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default IO=2F8h;IRQ=3; IO=3F8h; IRQ=3,4; IO=2F8h; IRQ=3,4; IO=3E8h; IRQ=3,4; IO=2E8h; IRQ=3,4; Select an optimal setting for Super IO device. Device Mode Standard Serial Port Mode Default IrDA Active pulse 1.
Industrial Motherboard ASK-IR Inverting IRTX&500KHz, Demodulation to IRRX Change the Serial Port mode.
Industrial Motherboard IMBA-Q77 Parallel Port Configuration Options Summary : Parallel Port Disabled Enabled Enable or Disable Parallel Port (LPT/LPTE) Change Settings Auto IO=378h;IRQ=5; IO=378h; IRQ=5,7; IO=278h; IRQ=5,7; IO=3BCh; IRQ=5,7; Select an optimal setting for Super IO device. Device Mode STD Printer Mode SPP Mode EPP-1.9 and SPP Mode EPP-1.7 and SPP Mode ECP Mode ECP and EPP 1.9 Mode ECP and EPP 1.7 Mode Change the Printer Port mode.
Industrial Motherboard IMBA-Q77 W83627DHG HW Monitor Options Summary : Smart Fan Disabled Function Enabled Enable or Disable Smart Fan Chapter 3 AMI BIOS Setup 3-22 Default
Industrial Motherboard IMBA-Q77 Smart Fan Mode Configuration Options Summary : SYS Smart Fan Mode Manual Mode Default Thermal Cruise Mode Fan Speed Cruise Mode SYS Smart Fan Mode Select SYS FAN expect PWM Output/DC Voltage Input expect PWM Output Value(Range:0 – 255) CPU Smart Fan 0 Manual Mode Mode Thermal Cruise Mode Fan Speed Cruise Mode CPU Smart Fan 0 Mode Select CPUFAN0 expect 128 Default PWM Output/DC 0~255 Voltage Input expect PWM Output Value(Range:0 – 255) AUX Smart Fan Manual Mode Default Mod
Industrial Motherboard IMBA-Q77 Fan Speed Cruise Mode AUX Smart Fan Mode Select AUX FAN expect 128 Default PWM Output/DC 0~255 Voltage Input expect PWM Output Value(Range:0 – 255) Chapter 3 AMI BIOS Setup 3-24
Industrial Motherboard IMBA-Q77 F81216 Second Super IO Configuration Options Summary : Serial Port 3 Configuration Serial Port 4 Configuration Serial Port 5 Configuration Serial Port 6 Configuration Set Parameters of Serial Port 3 (COMA) Set Parameters of Serial Port 4 (COMB) Set Parameters of Serial Port 5 (COMC) Set Parameters of Serial Port 6 (COMD) Chapter 3 AMI BIOS Setup 3-25
Industrial Motherboard IMBA-Q77 Serial Port 3 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default IO=2C0h; IRQ=7; IO=2C0h; IRQ=7; IO=2C8h; IRQ=7; Select an optimal setting for Super IO device.
Industrial Motherboard IMBA-Q77 Serial Port 4 Configuration Options Summary: Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default IO=2C8h; IRQ=7; IO=2C0h; IRQ=7; IO=2C8h; IRQ=7; Select an optimal setting for Super IO device.
Industrial Motherboard IMBA-Q77 Serial Port 5 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default IO=2D0h; IRQ=7; IO=2D0h; IRQ=7; IO=2D8h; IRQ=7; Select an optimal setting for Super IO device.
Industrial Motherboard IMBA-Q77 Serial Port 6 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default IO=2D8h; IRQ=7; IO=2D0h; IRQ=7; IO=2D8h; IRQ=7; Select an optimal setting for Super IO device.
Industrial Motherboard Setup submenu: Chipset Chapter 3 AMI BIOS Setup 3-30 IMBA-Q77
Industrial Motherboard IMBA-Q77 System Agent (SA) Configuration Options Summary : Graphics Config Graphics Settings. Configuration Memory Config Graphics Settings.
Industrial Motherboard IMBA-Q77 Graphics Configuration Options Summary : Primary Display Auto Default IGFX PEG PCI Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx.
Industrial Motherboard IMBA-Q77 128M 160M 192M 224M 256M 288M 320M 352M 384M 416M 448M 480M 512M 1024M Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. DVMT Total Gfx 128M Mem 256M Default MAX Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device. Primary IGFX Boot VBIOS Default Default Display CRT HDMI SKU or Display Port SKU Display Port DVI Select the Video Device which will be activated during POST.
Industrial Motherboard Memory Configuration Chapter 3 AMI BIOS Setup 3-34 IMBA-Q77
Industrial Motherboard IMBA-Q77 PCH-IO Configuration Options Summary : 82579LM LAN Enabled Controller Disabled Enable or disable onboard NIC. 82583V LAN Disabled Controller Enabled Control the PCI Express Root Port. PCIE_2 Slot (x4) Auto Speed Gen1 Gen2 Select PCI Express port speed. PCIE_3 Slot (x1) Auto Speed Gen1 Gen2 Select PCI Express port speed. PCIE_4 Slot (x1) Auto Speed Gen1 Gen2 Select PCI Express port speed.
Industrial Motherboard IMBA-Q77 Select power supply mode. Restore AC Always OFF Power Loss Always ON Last State Default Select AC power state when power is re-applied after a power failure.
Industrial Motherboard IMBA-Q77 PCH Azalia Configuration Options Summary : Azalia Disabled Enabled Auto Control Detection of the Azalia device. Disabled = Azalia will be unconditionally disabled Enabled = Azalia will be unconditionally Enabled Auto = Azalia will be enabled if present, disabled otherwise. Azalia Internal Disabled HDMI Codec Enabled Enable or disable internal HDMI codec for Azalia.
Industrial Motherboard IMBA-Q77 Setup submenu: Boot Options Summary : Bootup NumLock On Default State Off Select the keyboard NumLock state Quiet Boot Disabled Enabled Default Enables or disables Quiet Boot option Launch Disabled Default I82579LM PXE Enabled OpROM Enable or Disable Legacy Boot Option for I82579LM.
Industrial Motherboard IMBA-Q77 Hard Drives BBS Priorities Chapter 3 AMI BIOS Setup 3-39
Industrial Motherboard IMBA-Q77 Submenu: Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility. If you highlight these items and press Enter, a dialog box appears which lets you enter a password. You can enter no more than six letters or numbers. Press Enter after you have typed in the password.
Industrial Motherboard IMBA-Q77 Setup submenu: Exit Chapter 3 AMI BIOS Setup 3-41
Industrial Motherboard IMBA-Q77 Chapter 4 Driver Installation Chapter 4 Driver Installation 4-1
Industrial Motherboard IMBA-Q77 The IMBA-Q77 comes with a DVD-ROM that contains all drivers your need. Follow the sequence below to install the drivers: Step 1 – Install Chipset Driver Step 2 – Install VGA Driver Step 3 – Install LAN Driver Step 4 – Install AUDIO Driver Step 5 – Install USB3.0 Driver Step 6 – Install RAID & AHCI Driver Step 7 – Install ME Driver Step 8 – Install TPM Driver Step 9 – Install UART Driver Please read following instructions for detailed installations.
Industrial Motherboard IMBA-Q77 4.1 Installation: Insert the IMBA-Q77 DVD-ROM into the DVD-ROM Drive. And install the drivers from Step 1 to Step 9 in order. Step 1 – Install Chipset Driver 1. Click on the STEP1-Chipset folder and then double click on the infinst_autol_9.3.0.1026.exe 2. Follow the instructions that the window shows 3. The system will help you to install the driver automatically Step 2 – Install VGA Driver 1. Click on the STEP2-Graphic folder and select the OS your system is 2.
Industrial Motherboard IMBA-Q77 2. Double click on .exe file located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you to install the driver automatically Step 5 – Install USB3.0 Driver 1. Click on the STEP5-USB3.0 folder and double click on Setup.exe file 2. Follow the instructions that the window shows 3. The system will help you to install the driver automatically Note: USB3.0 only supports the OS of Windows 7 and above.
Industrial Motherboard IMBA-Q77 Step 9 – Install UART Driver ® For Windows XP 1. Click on the STEP9-UART folder and double click on patch.bat file 2. Follow the instructions that the window shows 3. The system will help you to install the driver automatically ® For Windows 7 1.
Industrial Motherboard IMBA-Q77 2. Change User Account Control Settings to [Never notify] 3.
Industrial Motherboard IMBA-Q77 4. To run patch.
Industrial Motherboard IMBA-Q77 Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Industrial Motherboard IMBA-Q77 A.1 Programming IMBA-Q77 utilizes W83627DHG chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application.
Industrial Motherboard IMBA-Q77 (3) Exit the W83627DHG config Mode. Undesired result may occur if the config Mode is not exited normally. (1) Enter the W83627DHG config Mode To enter the W83627DHG config Mode, two special I/O write operations are to be performed during Wait for Key state. To ensure the initial state of the key-check logic, it is necessary to perform two write operations to the Special Address port (2EH).
Industrial Motherboard IMBA-Q77 1 R/W 0: GPIO5 is inactive. 1: GPIO5 is active. 0 R/W 0: WDTO# and PLED are inactive. 1: WDTO# and PLED are inactive. CR F5h. (WDTO# and KBC P20 Control Mode Register; Default 00h) BIT READ/WRITE 7~5 Reserved. 4 R/W 3 R/W 2 R/W 1 R/W 0 DESCRIPTION 1000 time faster in WDTO# count mode. 0: Disable. 1: Enable. (If bit-3 is Second Mode, the count mode is 1/1000 Sec.) (If bit-3 is Minute Mode, the count mode is 1/1000 Min.) Select WDTO# count mode.
Industrial Motherboard IMBA-Q77 01h: Time-out occurs after 1 second/minute 02h: Time-out occurs after 2 second/minutes 03h: Time-out occurs after 3 second/minutes ………………………………………………….. FFh: Time-out occurs after 255 second/minutes CR F7h. (WDTO# Control & Status Register; Default 00h) BIT READ/WRITE 7 R/W 6 R/W 5 Write “1” Only 4 R/W Write“0”Clear 3~0 R/W DESCRIPTION Mouse interrupt reset watch-dog timer enable 0: Watchdog timer is not affected by mouse interrupt.
Industrial Motherboard IMBA-Q77 A.2 W83627DHG Watchdog Timer Initial Program LDN Register Bit WDT Timer value 0x07 0xF6 Bit [7-0] WDT Unit 0x07 0xF5 Bit3 Description 00h: Time-out Disable 01h: Time-out occurs after 1 minute only. 02h: Time-out occurs after 2 second/minutes 03h: Time-out occurs after 3 second/minutes ………………………....................................... FFh: Time-out occurs after 255 second/minutes (The deviation is approx 1 second.) Select WDTO# count mode. 0: Second Mode.
Industrial Motherboard IMBA-Q77 ************************************************************************************ // Procedure : AaeonWDTConfig void AaeonWDTConfig (void){ Byte val; //Super I/O Entry Key outportb(SIOIndex,0x87); outportb(SIOIndex,0x87); //Setting WDT Pin.
Industrial Motherboard IMBA-Q77 ************************************************************************************ // Procedure : void AaeonWDTEnable (Byte Timer, boolean Unit){ Byte val; //Super I/O Entry Key outportb(SIOIndex,0x87); outportb(SIOIndex,0x87); // Select Logic Device Number Register outportb(SIOIndex,0x07); outportb(SIOData,0x08); // Setting WDT Operation Mode outportb(SIOIndex,0xF5); val = inportb((SIOData); outportb(SIOIndex,0xF5); outportb(SIOData, val | Unit << 3 ); // Setting WDT Cou
Industrial Motherboard IMBA-Q77 Appendix B I/O Information Appendix B I/O Information B-1
Industrial Motherboard B.
Industrial Motherboard IMBA-Q77 Appendix B I/O Information B-3
Industrial Motherboard B.
Industrial Motherboard IMBA-Q77 B.
Industrial Motherboard Appendix B I/O Information B-6 IMBA-Q77
Industrial Motherboard IMBA-Q77 Appendix B I/O Information B-7
Industrial Motherboard B.
Industrial Motherboard IMBA-Q77 Appendix C Mating Connector Appendix C Mating Connector C - 1
Industrial Motherboard IMBA-Q77 C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables.
Industrial Motherboard COM2 COM3 COM4 COM5 COM6 IR1 DIO1 ATX1 ATX2 IMBA-Q77 COM Port Connector COM Port Connector COM Port Connector COM Port Connector COM Port Connector IrDA Connector Catch Electronics Catch Electronics Catch Electronics Catch Electronics Catch Electronics JIH VEI Electronics DIO Port Connector ATX 4PIN Connector Catch Electronics Catch Electronics 1147-000-10 S 1147-000-10 S 1147-000-10 S 1147-000-10 S 1147-000-10 S 21B12050-X XS10B-01G4/2.
Industrial Motherboard DIMM2 DDR3 204PIN SKT DIMM3 DDR3 204PIN SKT DIMM4 DDR3 204PIN SKT PCI1 PCI Connector PCI2 PCI Connector PCI3 PCI Connector KBMS1 Keyboard & Mouse DVI/COM1 COM1+DVI KORTAK AR240H-031 B-A0H N/A KORTAK AR240H-101 B-A0H N/A KORTAK AR240H-031 B-A0H N/A FOXCONN EH06001-HH W-DF EH06001-HH W-DF EH06001-HH W-DF MH11061-P3 6-4F D205D1B010 12PN 3VD21203-H 7U0-4H 9S020F-03A S-00H GSP-ABA-H DM-013-K09 JFM38U1B-2 1U5-4F 05-000939M 23-1 JA33331-211 9-4F N/A FOXCONN FOXCONN FOXCONN Tec
Industrial Motherboard IMBA-Q77 Appendix D RAID & AHCI Settings Appendix D RAID & AHCI Settings D-1
Industrial Motherboard IMBA-Q77 D.
Industrial Motherboard IMBA-Q77 Step 3: The setting procedures “ In BIOS Setup Menu” A: Advanced -> SATA Configuration -> SATA Mode Selection -> RAID Mode Step 4: The setting procedures “In BIOS Setup Menu” C: Boot -> Boot Option #1 -> DVD-ROM Type Appendix D RAID & AHCI Settings D-3
Industrial Motherboard IMBA-Q77 Step 5: The setting procedures “In BIOS Setup Menu” D: Save & Exit -> Save Changes and Exit Step 6: Press Ctrl-I to enter MAIN MENU Appendix D RAID & AHCI Settings D-4
Industrial Motherboard IMBA-Q77 Step 8: Choose “1.
Industrial Motherboard Step 10: Choose “Create Volume” Step 11: Choose “Y” Appendix D RAID & AHCI Settings D-6 IMBA-Q77
Industrial Motherboard IMBA-Q77 Step 12: Choose “5.
Industrial Motherboard Step 14: Setup OS Step 15: Press “F6” Appendix D RAID & AHCI Settings D-8 IMBA-Q77
Industrial Motherboard IMBA-Q77 Step 16: Choose “S” Step 17: Choose “Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller” Appendix D RAID & AHCI Settings D-9
Industrial Motherboard IMBA-Q77 Step 18: It will show the model number you select and then press “ENTER” Step 19: Setup is starting Windows Appendix D RAID & AHCI Settings D-10
Industrial Motherboard IMBA-Q77 C.
Industrial Motherboard IMBA-Q77 Step 3: The setting procedures “ In BIOS Setup Menu” A: Advanced -> SATA Configuration -> SATA Configuration -> SATA Mode -> AHCI Mode Step 4: The setting procedures “In BIOS Setup Menu” B: Boot -> Boot Option #1 -> DVD-ROM Type Appendix D RAID & AHCI Settings D-12
Industrial Motherboard IMBA-Q77 Step 5: The setting procedures “In BIOS Setup Menu” C: Save & Exit -> Save Changes and Reset Step 6: Setup OS Appendix D RAID & AHCI Settings D-13
Industrial Motherboard Step 7: Press “F6” Step 8: Choose “S” Appendix D RAID & AHCI Settings D-14 IMBA-Q77
Industrial Motherboard IMBA-Q77 Step 9: Choose “Intel(R) 7 Series Chipset Family SATA AHCI Controller” Step 10: It will show the model number you select and then press “ENTER” Appendix D RAID & AHCI Settings D-15
Industrial Motherboard Step 11: Setup is loading files Appendix D RAID & AHCI Settings D-16 IMBA-Q77
Industrial Motherboard IMBA-Q77 Appendix E Digital Input & Output Appendix E Digital Input & Output E-1
Industrial Motherboard IMBA-Q77 E.1 DIO Programming IMBA-Q77 utilizes W83627DHG chipset as its Digital I/O controller. Below are the procedures to complete its configuration and the AAEON initial watchdog timer program is also attached based on which you can develop customized program to fit your application. There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode.
Industrial Motherboard IMBA-Q77 E.2 Digital I/O Register GPIO Device Configuration Register (LDN 0x09) Register 0x[HEX] F0 F1 Register Name DIO I/O register 0: The respective DIO PIN is programmed as an output port. 1: The respective DIO PIN is programmed as an input port. GPIO3 Data register For output ports, the respective bits can be read and written by the pins. For input ports , the respective bits can only be read by the pins. Write accesses are ignored.
Industrial Motherboard IMBA-Q77 E.
Industrial Motherboard IMBA-Q77 ************************************************************************************ #include #include
Industrial Motherboard IMBA-Q77 AaeonDigitalOutput(int byte LDN, int byte RegNum, int byte BitNum, boolean Status); } Appendix E Digital Input & Output E-6
Industrial Motherboard IMBA-Q77 ************************************************************************************ // Procedure : AaeonDigitalInput boolean AaeonDigitalInput(int byte LDN, int byte RegNum, int byte BitNum){ int byte ByteTempValue0 = 0; // Enter SIO MB PnP mode outportb (SIOIndex, 0x87); outportb (SIOIndex, 0x87); // Select Logic Device Number Register outportb (SIOIndex, 0x07); // SIO LDN Register Offset = 0x07 outportb (SIOData, LDN); // Select register offset, and read the register val
