User guide

IMBM-H61A
2-16
Audio2,4,6,8-channelconguration
Port 2-channel 4-channel 6-channel 8-channel
Light Blue (Rear
panel)
Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Lime (Front panel) - - - Side Speaker Out
8. USB 2.0 ports. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0/1.1 devices.
9. DVI-I port. This port is for any DVI-I compatible device and are HDCP
compliant, allowing playback of HD DVD, Blu-Ray and other protected
content.
10. PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.
2.7.2 Internal connectors
IMPORTANT:
• Forafullyconguredsystem,werecommendthatyouuseapowersupply
unit(PSU)thatcomplieswithATX12VSpecication2.0(orlaterversion)
and provides a minimum power of 350 W.
• DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the
system will not boot up.
• We recommend that you use a PSU with higher power output when
conguringasystemwithmorepower-consumingdevices.Thesystem
may become unstable or may not boot up if the power is inadequate.
1. ATX power connectors (24-pin EATXPWR, 4-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs
aredesignedtottheseconnectorsinonlyoneorientation.Findtheproper
orientationandpushdownrmlyuntiltheconnectorscompletelyt.
IMBM-H61A
IMBM-H61A ATX power connectors
EATXPWR
PIN 1
PIN 1
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
EATX12V
+12V DC
+12V DC
GND
GND
NOTE: Refertotheaudiocongurationtablebelowforthefunctionofthe
audioportsinthe2,4,6,or8-channelconguration.