Industrial Motherboard IMBM-H61B
E7930 First Edition (V1) January 2013 Copyright Notice This document is copyrighted, 2013. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Contents Chapter 1 Product overview 1.1 Package contents.......................................................................... 1-1 1.2 Features......................................................................................... 1-1 1.3 Specifications................................................................................ 1-2 Chapter 2 Motherboard information 2.1 Before you proceed...................................................................... 2-1 2.2 Motherboard layout..
Contents 3.5 3.4.6 SIO GPIO....................................................................... 3-10 3.4.7 CH7511B Panel Controller............................................. 3-10 3.4.8 Onboard Devices Configuration......................................3-11 3.4.9 APM............................................................................... 3-12 3.4.10 Network Stack................................................................ 3-13 Monitor menu.........................................
Chapter 1 Product overview 1.1 Package contents Check your industrial motherboard package for the following items. 1 x Industrial Motherboard 1 x Cable Kit 1 x I/O Shield 1 x DVD-ROM for manual (in PDF format) and drivers NOTE: If any of the above items is damaged or missing, contact your distributor or sales representative immediately. 1.
1.3 Specifications SYSTEM Form factor CPU Micro ATX LGA1155 socket for Intel® 3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors Supports Intel® 22nm / 32nm CPU Supports Intel® Turbo Boost Technology 2.0 • The Intel® Turbo Boost Technology 2.0 support depends on the CPU types. Memory 2 x DIMM (8GB per DIMM), max.
DISPLAY Chipset Resolution Intel® H61 Express Chipset Output interface 2 x VGA ports Storage 3 x SATA 3.0Gb/s ports Serial port 2 x RS-232/422/485 box header (COM4 support 5V/12V/RI option) Up to 1920x1200@75Hz for VGA Up to 1920x1200@60Hz for LVDS 1 x LVDS connector at midboard I/O 1 x CFast socket support 9 x RS-232 box header (COM 3, COM5~8, COM10~13) 2 x COM on rear I/O (support RS-232) USB DIO LPT RTC Keyboard/Mouse 8 x USB2.
1-4 IMBM-H61B
Chapter 2 Motherboard information 2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. CAUTION! • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
2.2 Motherboard layout NOTE: Place eight screws into the holes indicated by circles to secure the motherboard to the chassis. CAUTION! Do not overtighten the screws! Doing so can damage the motherboard. 1 2 3 4 5 3 6 3 4 2 24.4cm(9.6in) EATX12V CPU_FAN1 COM5 COM6 KBMS COM7 COM8 COM10 COM11 CHA_FAN1 RTL 8111F Lithium Cell CMOS Power AUDIO CHA_FAN2 Fintech 81866D-I PCIEX16_1 ATMODE ASM 1083 Super I/O SB_PWR1 J3 J1 J2 INV LVDS Intel® H61 PCI1 24.4cm(9.
Connectors/Jumpers/Slots 1. COM4 Ring/+5V/+12V selection (6-pin J5) 2. Serial port connectors (10-1 pin COM3/4, COM5~13) 3. CPU and chassis fan connectors (4-pin CPU_FAN1, 4-pin CHA_FAN) 4. ATX power connectors (24-pin EATXPWR, 4-pin EATX12V) 5. Intel® LGA1155 CPU socket Page 2-14 2-21 2-17 2-16 2-6 6. 7. 8. 9 DDR3 DIMM slots Inverter voltage selection (3-pin J2) Inverter Back Light Control mode selection (3-pin J3) Standby Power LED (SB_PWR1) 2-11 2-13 2-14 2-1 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
2-4 2.3 Screw size 2.3.
2.3.
2.4 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1155 socket designed for the Intel® 3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors. IMBM-H61B CPU socket LGA1155 IMPORTANT: Unplug all power cables before installing the CPU. CAUTION! 2-6 • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent.
2.4.1 Installing the CPU CAUTION! The LGA1156 CPU is incompatible with the LGA1155 socket. DO NOT install a LGA1156 CPU on the LGA1155 socket.
4 C A B 5 2-8 IMBM-H61B
2.4.2 CPU heatsink and fan assembly installation CAUTION! Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
To uninstall the CPU heatsink and fan assembly 1 2 A B B A 2-10 IMBM-H61B
2.
2.6 1. Jumpers Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. CLRTC IMBM-H61B 1 2 2 3 Protected (Default) Clear IMBM-H61B Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2.
2. LVDS panel voltage selection (3-pin J1) J1 1 IMBM-H61B 2 2 3 +5V +3.3V (Default) IMBM-H61B LVDS Panel Voltage Selection Pins 3. +5V 1-2 +3.3V (Default) 2-3 Inverter voltage selection (3-pin J2) J2 1 IMBM-H61B 2 2 +12V 3 +5V (Default) IMBM-H61B Inverter Voltage Selection Pins 4.
Pins 5. DC Voltage Control (Default) 1-2 PWM Control 2-3 COM4 Ring/+5V/+12V selection (6-pin J5) J5 5 IMBM-H61B 6 3 4 Ring +5V (Default) 1 2 +12V IMBM-H61B COM2 Ring/+5V/+12V Selection Pins 6. +12V 1-2 +5V 3-4 Ring (Default) 5-6 AT Mode selection (2-pin ATMODE) ATMODE PIN 1 ATX AT MODE IMBM-H61B IMBM-H61B ATMODE setting Pins 1 (Default) ATX 1-2 AT Mode NOTE: Jumper setting of ATMode should be consistent with the setting of AT/ATX Power Type in BIOS. Refer to section 3.4.
2.7 Connectors 2.7.1 Rear panel connectors 1 2 3 4 5 6 9 2 3 8 7 1. PS/2 Mouse port (green). This port is for a PS/2 mouse. 2. Serial ports. These ports connect a modem, or other devices that conform with serial specification. 3. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. 4. LAN (RJ-45) ports. These ports allow Gigabit connection to a Local Area Network (LAN) through a network hub.
NOTE: Refer to the audio configuration table below for the function of the audio ports in the 2, 4, 6, or 8-channel configuration. Audio 2, 4, 6, 8-channel configuration Port 2-channel 4-channel 6-channel 8-channel Light Blue (Rear Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out panel) Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center Lime (Front panel) Side Speaker Out 8. USB 2.0 ports.
2. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU FAN PWM CPU FAN SENSE CPU FAN VCC GND CPU_FAN1 CHA FAN PWM CHA FAN SENSE CHA FAN VCC GND CHA_FAN1 CHA_FAN2 GND CHA FAN VCC CHA FAN SENSE CHA FAN PWM IMBM-H61B Fan connectors CAUTION: Do not forget to connect the fan cables to the fan connectors.
4. System panel connector (10-1 pin F_PANEL) This connector supports several chassis-mounted functions. F_PANEL PLED+ PLEDPWR GND PWR LED PWR BTN HD_LED+ HD_LEDGround HWRST# (NC) PIN 1 +HD_LED RESET IMBM-H61B System panel connector • System power LED (2-pin PLED) • This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
6. Intel® H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~3) SATA3G_3 SATA3G_2 SATA3G_1 GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via Serial ATA 3.0 Gb/s signal cables. IMBM-H61B Intel® SATA 3.0Gb/s connectors NOTES: 7.
8. USB 2.0 connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.
10. Serial port connectors (10-1 pin COM1/2, COM5~13) These connectors are for serial (COM) ports. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.
12. Backlight inverter power connector (5-pin INV) Connect the backlight inverter power cable to this connector. Inverter VCC Back Light Control GND GND Back Light Enable INV IMBM-H61B Inverter Connector NOTE: The backlight inverter power cable is purchased separately. 13. Direct connector (2-pin DRCT) This connector is for the chassis-mounted button that supports the DirectBIOS function. Connect the button cable that supports DirectBIOS, from the chassis to this connector on the motherboard.
Chapter 3 BIOS setup 3.1 BIOS setup program Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: • Press during the Power-On Self Test (POST). If you do not press , POST continues with its routines.
3.2 BIOS menu screen Back button Menu items Submenu items Menu bar Configuration fields Pop-up window General help Navigation keys Menu bar The menu bar on top of the screen has the following main items: 3-2 Main For changing the basic system configuration. Advanced For changing the advanced system settings. Boot For changing the system boot configuration. Tool For configuring options for special functions. Exit For selecting the exit options and loading default settings.
Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. Back button This button appears when entering a submenu. Press or use the USB mouse to click this button to return to the previous menu screen. Submenu items A greater than sign (>) before each item on any menu screen means that the item has a submenu.
3.3 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. 3.3.1 System Language [English] Allows you to choose the BIOS language version from the options. Configuration options: [English] 3.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. 3.3.
Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change an administrator password: 1.
To clear the user password, follow the same steps as in changing a user password, but press when prompted to create/confirm the password. After you clear the password, the User Password item on top of the screen shows Not Installed. 3.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. CAUTION: Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction.
3.4.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. IMPORTANT: The items shown in submenu may be different due to the CPU you installed. Intel Adaptive Thermal Monitor [Enabled] [Enabled] Enables the overheated CPU to throttle its clock speed to cool down. [Disabled] Disables the CPU thermal monitor function. Active Processor Cores [All] Allows you to choose the number of CPU cores to activate in each processor package.
3.4.2 PCH Configuration High Precision Timer [Enabled] Allows you to enable or disable the High Precision Event Timer. Configuration options: [Enabled] [Disabled] Intel(R) Rapid Start Technology Intel(R) Rapid Start Technology [Disabled] Allows you to enable or disable the Intel® Rapid Start Technology. Configuration options: [Enabled] [Disabled] NOTE: The following three items appear only when you set the Intel(R) Rapid Start Technology to [Enabled].
3.4.3 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. SATA Mode Selection [IDE] Allows you to set the SATA configuration. [Disabled] Disables the SATA controller. [IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices.
consumption for iGPU while the system is idle. Configuration options: [Disabled] [Enabled] iGPU Multi-Monitor [Disabled] Allows you to enable or disable iGPU Multi-Monitor support for add-on graphics devices. The iGPU shared memory size will be fixed at 64MB. Configuration options: [Disabled] [Enabled] 3.4.5 USB Configuration The items in this menu allow you to change the USB-related features. NOTE: The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None.
Primary IGFX Boot Display [Auto] Select the integrated display device which is activated during POST. Your selection does not take effect if you have installed an external graphics device. Secondary boot display selection will appear based on your selection. VGA modes can be supported only on the primary display. Configuration options: [Auto] [CRT] [DVI] [LVDS] CH7511B Backlight Control Mode [DC Mode] Allows you to select CH7511B Backlight Control mode.
RS Mode [RS232] Allows you to configure the serial communications standard of serial port (COM) 9. Configuration options: [RS232] [RS422] [RS485] Serial Port 10~13 [Enabled] Allows you to enable or disable serial ports (COM) 10~13. Configuration options: [Enabled] [Disabled] Parallel Port [Enabled] Allows you to enable or disable the parallel port (LPT). Configuration options: [Enabled] [Disabled] Change Settings [Auto] Allows you to select the Parallel Port base address.
Power On By Ring [Disabled] [Disabled] Disables Ring to generate a wake event. [Enabled] Enables Ring to generate a wake event. Power On By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. [Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/Second will become user-configurable with set values. RTC Alarm Date (Days) This item appears only when you set the previous item to [Enabled] and allows you to select RTC alarm time (days).
3.5 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. 3.5.1 CPU Temperature / MB Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures. 3.5.
CPU Fan Profile [Standard] This item appears only when you enable the CPU Q-Fan Control feature and allows you to set the appropriate performance level of the CPU fan. [Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on the CPU temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan operation. [Turbo] Sets to [Turbo] to achieve maximum CPU fan speed. 3.5.
3.6 Boot menu The Boot menu items allow you to change the system boot options. 3.6.1 [Enabled] [Disabled] Full Screen Logo [Enabled] Enables the full screen logo display feature. Disables the full screen logo display feature. Post Report [5 sec] This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to set the waiting time for the system to display the post report.
3.6.3 [On] [Off] 3.6.4 Bootup NumLock State [On] Sets the power-on state of the NumLock to [On]. Sets the power-on state of the NumLock to [Off]. Wait for ‘F1’ If Error [Disabled] When this item is set to [Enabled], the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled] 3.6.5 Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence.
3.6.7 Boot Option Priorities These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. NOTES: 3.6.8 • To select the boot device during system startup, press after the first screen appears. • To access Windows OS in Safe Mode, press after POST. Boot Override These items displays the available devices.
3.8 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select Yes to load the default values.
3-20 IMBM-H61B
Appendix Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
電子信息產品污染控制標示：圖中之數字為產品之環保使用期限。僅 指電子信息產品中含有的有毒有害物質或元素不致發生外洩或突變從 而對環境造成污染或對人身、財產造成嚴重損害的期限。 有毒有害物質或元素的 名 稱 及 含 量 說 明 標 示 ： 有害物質或元素 部件名稱 鉛 (Pb) 汞 (Hg) 鎘 (Cd) 六 價 鉻 (Cr(VI)) 多 溴 聯 苯 (PBB) 多溴二苯醚 (PBDE) 印刷電路板及其 電子組件 × ○ ○ ○ ○ ○ 外部信號連接頭 及線材 × ○ ○ ○ ○ ○ ○： 表示該有毒有害物質在該部件所有均質材料中的含量均在 SJ/T 11363-2006 標准規定的限量要求以下。 ×： 表示該有毒有害物質至少在該部件的某一均質材料中的含量超出 SJ/T 11363-2006 標准規定的限量要求，然該部件仍符合歐盟指令 2002/95/EC 的 規范。 備註：此產品所標示之環保使用期限，係指在一般正常使用狀況下。 A-2 IMBM-H61B
