Owner's manual

Chapter 3: BIOS setup
3-11
Primary IGFX Boot Display [Auto]
Select the integrated display device which is activated during POST. Your selection
does not take effect if you have installed an external graphics device. Secondary
boot display selection will appear based on your selection. VGA modes can be
supported only on the primary display. Conguration options: [Auto] [CRT] [DVI]
[LVDS]
CH7511B Backlight Control Mode [DC Mode]
Allows you to select CH7511B Backlight Control mode. Conguration options: [DC
Mode] [PWM Mode]
Backlight Brightness Setting [75]
Allows you to set the backlight brightness. Select a larger number for a brighter
backlight. Conguration options: [0] [25] [50] [75] [100]
3.4.8 OnboardDevicesConguration
HD Audio Controller [Enabled]
[Enabled] Enables the High Denition Audio Controller.
[Disabled] Disables the controller.
Realtek LAN1 Controller [Enabled]
[Enabled] Enables the Realtek LAN controller 1.
[Disabled] Disables the controller.
Realtek LAN1 PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN1 Controller item to
[Enabled] and allows you to enable or disable the PXE OptionRom of the Realtek
LAN controller 1. Conguration options: [Enabled] [Disabled]
Realtek LAN2 Controller [Enabled]
[Enabled] Enables the Realtek LAN controller 2.
[Disabled] Disables the controller.
Realtek LAN2 PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN2 Controller item to
[Enabled] and allows you to enable or disable the PXE OptionRom of the Realtek
LAN controller 2. Conguration options: [Enabled] [Disabled]
Serial Port 1-9 [Enabled]
Allows you to enable or disable serial ports (COM) 1-9. Conguration options:
[Enabled] [Disabled]
RS Mode [RS232]
Allows you to congure the serial communications standard of serial port (COM) 4.
Conguration options: [RS232] [RS422] [RS485]