Owner manual

Chapter 3: BIOS setup
3-19
3.6.5 SATABootConguration[EnableAll]
AllowsyoutosetalltheSATAportsoraspecicSATAportasabootableSATA
port.Congurationoptions:[EnableAll][OnlySATA1][OnlySATA2][OnlySATA3]
[Only SATA4] [Only SATA5] [Only SATA6]
NOTES:
SATA1: labeled SATA6G_2onthismotherboard;
SATA2: labeled SATA6G_3onthismotherboard;
SATA3: labeled SATA3G_1onthismotherboard;
SATA4: labeled SATA3G_2onthismotherboard;
SATA5: labeled SATA3G_3onthismotherboard;
SATA6: labeled SATA3G_4 on this motherboard.
3.6.6 Option ROM Messages [Force BIOS]
[Force BIOS] The third-party ROM messages will be forced to display during the
boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-
party manufacturer had set the add-on device to do so.
3.6.7 Boot Option Priorities
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
NOTES:
• Toselectthebootdeviceduringsystemstartup,press<F8>aftertherst
screen appears.
• To access Windows OS in Safe Mode, press <F8> after POST.
3.6.8 Boot Override
These items displays the available devices. The number of device items that
appears on the screen depends on the number of devices installed in the system.
Click an item to start booting from the selected device.