DIO Module PFM-T096P PFM-T096P PCI-104 96-Channel DIO Module XILINX XC3S200AN BGA 256 Chipset 5V/TTL Compatible +5V through PCI-104 connector st PFM-T096P Manual 1 Ed th March 5 , 2014
DIO Module PFM-T096P Copyright Notice This document is copyrighted, 2014. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
DIO Module PFM-T096P Acknowledgments All other products’ name or trademarks are properties of their respective owners. CompactFlash™ is a trademark of the Compact Flash Association. Microsoft Windows is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc. IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation. SoundBlaster is a trademark of Creative Labs, Inc.
DIO Module PFM-T096P Packing List Before you begin installing your card, please make sure that the following materials have been shipped: Product CD PFM-T096P Cable x 1 (for function test only) iii
DIO Module PFM-T096P Contents Chapter 1 General Information 1.1 Introduction ................................................................ 1-2 1.2 Features .................................................................... 1-2 1.3 Specifications ............................................................ 1-3 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................... 2-2 2.2 Location and Mechanical Drawing of Connectors and Jumpers ................
DIO Module PFM-T096P Appendix A Mating Connector A.1 List of Mating Connectors and Cables ...................A-2 Appendix B Support Matrix B.1 List of Support Matrix .............................................
DIO Module PFM-T096P Chapter 1 General Information Chapter 1 General Information 1- 1
DIO Module PFM-T096P 1.1 Introduction AAEON Technology, a leading company in embedded boards manufacturing with a full range of PC/104 CPU Modules, launches a brand new DIO Module-PFM-T096P. Its compact size and rich functionality ensures the most cost effective and compatible module to coincide with your existing system planning devices. The PFM-T096P features PCI-104 expansion interface. It supports Windows XP, Win 7 and Linux operating systems.
DIO Module PFM-T096P 1.3 Specifications Form Factor PC/104 (90mm x 96mm) Chipset XILINX XC3S200AN BGA 256, SN74ALVC245 Expansion Slot PCI-104 Power Requirement +5V through PCI-104 connector Operating Temperature 32˚F~ 140˚F (0˚C ~ 60˚C) System Cooling Fanless I/O Connector 4 x 50-pin box header Gross Weight 0.13 lb (0.06 Kg) Net Weight 0.66 lb (0.
DIO Module PFM-T096P Chapter 2 Quick Installation Guide Chapter 2 Quick Installation Guide 2-1
DIO Module PFM-T096P 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
DIO Module PFM-T096P 2.
DIO Module Solder Side Solder Side Chapter 2 Quick Installation Guide 2-4 PFM-T096P
DIO Module PFM-T096P 2.3 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: Label Function JP1 Firmware Programming Selection JP2 PCI Resource Selection-1 JP3 PCI Resource Selection-2 SW1 BoardID Selection 2.4 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
DIO Module PFM-T096P 2.5 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
DIO Module PFM-T096P 2.6 Firmware Programming Selection (JP1) Enable Disable (default) JP1 Function 1B SHORT Enable OPEN Disable(default) 2.7 PCI Resource Selection (JP2/3) JP2 JP3 JP2 JP3 Function 2B OPEN OPEN PCI Resource 1(IRQA,CLK0) OPEN SHORT PCI Resource 2(IRQB,CLK1) OPEN PCI Resource 3(IRQC,CLK2) SHORT SHORT PCI Resource 4(IRQD,CLK3) SHORT 2.
DIO Module PFM-T096P 2.9 JTAG (CN1) for Firmware Programming Pin Pin Name Signal Type Signal Level 1 +3.3V PWR 2 GND GND 3 TCK CLK 4 TDO OUT +3.3V 5 TDI IN +3.3V 6 TMS IN 2.
DIO Module PFM-T096P 9 PnGrpC3 IN/OUT 10 GND GND 11 PnGrpC2 IN/OUT 12 GND GND 13 PnGrpC1 IN/OUT 14 GND GND 15 PnGrpC0 IN/OUT 16 GND GND 17 PnGrpB7 IN/OUT 18 GND GND 19 PnGrpB6 IN/OUT 20 GND GND 21 PnGrpB5 IN/OUT 22 GND GND 23 PnGrpB4 IN/OUT 24 GND GND 25 PnGrpB3 IN/OUT 26 GND GND 27 PnGrpB2 IN/OUT 28 GND GND 29 PnGrpB1 IN/OUT 30 GND GND 31 PnGrpB0 IN/OUT 32 GND GND +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V Chapter 2
DIO Module PFM-T096P 33 PnGrpA7 IN/OUT 34 GND GND 35 PnGrpA6 IN/OUT 36 GND GND 37 PnGrpA5 IN/OUT 38 GND GND 39 PnGrpA4 IN/OUT 40 GND GND 41 PnGrpA3 IN/OUT 42 GND GND 43 PnGrpA2 IN/OUT 44 GND GND 45 PnGrpA1 IN/OUT 46 GND GND 47 PnGrpA0 IN/OUT 48 GND GND 49 +5V PWR 50 EXTTRG IN ※EVENT、EXTTRG for +5V +5V +5V +5V +5V +5V +5V +5V Counter ※PnGrp(A/B/C)(0~7) : DIO Port (1/2/3/4) Group (A/B/C) bit(0/1/2/3/4/5/6/7) Chapter 2 Quick Installation Guide
DIO Module PFM-T096P Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 印刷电路板 及其电子组件 外部信号 连接器及线材 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2-11
DIO Module PFM-T096P Chapter 3 Driver Installation Chapter 3 Driver Installation 3 - 1
DIO Module PFM-T096P Before using PFM-T096P utility, you need to install driver first. 3.1 Supported Environment OS: Windows 7, Windows Embedded Standard 7, Windows XP, Windows Embedded Standard 2009 3.
DIO Module PFM-T096P Step1: Click “Update Driver” as the following graphic shows.
DIO Module PFM-T096P Step 2: Choose “Browse my computer for driver software” and click it. Step 3: Locate to Win7 driver folder.
DIO Module PFM-T096P Step 4: Choose “Install this driver software anyway” and click it. Step 5: The following dialog box pops up and the driver installation is finished.
DIO Module PFM-T096P Step 6: You will see the driver is properly installed.
DIO Module PFM-T096P 3.3 For Windows XP: In Windows XP, you need to install Kernel-Mode Driver Framework first. Step 1: Click Microsoft Kernel-Mode Driver Framework Install-v1.9-Win2k-WinXP-Win2k3.exe.
DIO Module PFM-T096P Step 2: Click ”Next“ and it will update your system automatically.
DIO Module PFM-T096P Step 3: Click ”Finish“ to complete the updating. Step 4: After installing the KDF, please install PFM-T096P driver.
DIO Module PFM-T096P Step 5: Click “Update Driver”. Step 6: Choose “Yes, this time only” and click “Next” to continue.
DIO Module PFM-T096P Step 7: Choose “Install from a list or specific location (Advanced)” and click “Next” to continue. Step 8: Click “Browse” to locate to the Win XP driver folder. Then click “Next”.
DIO Module PFM-T096P Step 9: The driver installation starts. Step 10: The following dialog box pops up and the driver installation is finished. Click “Finish”.
DIO Module PFM-T096P Step 11: You will see the driver is properly installed.
DIO Module 3.
DIO Module PFM-T096P Function Explanation 1. All PFM-T096P devices will list here 2. There are 4 ports in PFM-T096P (1~4) 3. Shows firmware version 4. Check this box will auto refresh DIO data and counter status 5.
DIO Module PFM-T096P 1. Digital IO input settings (Checked means set in input mode) 2. Digital IO data status (Checked means High, otherwise Low) 3. There are five interrupt mode: a. Disable: No interrupt b. Edge: When encounter Falling or Rising edge, an interrupt occurs c. Level: When encounter Low or High level, interrupt occurs repeatly d. Change State: When DIO data status changed, an interrupt occurs e. Pattern Match: When pattern matching, interrupt occurs.
DIO Module PFM-T096P Data = 0b00111000, then interrupt occurs. Counter value is 0~65535. When overflowing, interrupt occurs. 1. There are two mode: a. Up count: counter will increase b. Down count: counter will decrease 2. Read current counter number 3. Set count value 4. When interrupt occurring, this value decides pulse interval. Ex.
DIO Module PFM-T096P Appendix A Mating Connector Appendix A Mating Connector A - 1
DIO Module PFM-T096P A.1 List of Mating Connectors and Cables The table notes mating connectors and available cables.
DIO Module PFM-T096P Appendix B Support Matrix Appendix B Support Matrix B - 1
DIO Module PFM-T096P B.1 List of Support Matrix For customer implement PFM-T096P with difference main board some time meet resource issues. Below support matrix for reference. 1 M/B XP Platform setting Win 7 Platform setting Remark: PFM-CVS INT_B/C/D PASS INT_A/B/C/D PASS PFM-CVSB R1.0 BIOS Rev.B 2 EPIC-HD07 INT_A/B/C PASS INT_A/B/C PASS EPIC-HD07 R1.3 BIOS 3 EPIC-QM77 INT_A/C/D PASS INT_A/B/C/D PASS EPIC-QM77 R1.
