Rugged Tablet Computer RTC-1000AS RTC-1000AS ® Intel AtomTM N270 1.6 GHz Processor Rugged Tablet Computer with 10.2” WSVGA Color TFT LCD 1 COM, 2 USB2.
Rugged Tablet Computer RTC-1000AS Copyright Notice This document is copyrighted, 2014. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Rugged Tablet Computer RTC-1000AS Acknowledgments All other products’ name or trademarks are properties of their respective owners. Intel , and Atom Microsoft Windows is a registered trademark of Microsoft Corp. ® TM ® are trademarks of Intel Corporation. ® All other product names or trademarks are properties of their respective owners.
Rugged Tablet Computer RTC-1000AS Packing List Before you begin operating your PC, please make sure that the following materials are enclosed: 1 RTC-1000AS Rugged Tablet Computer with a Hard Disk Drive & 1GB/ 2GB SODIMM Memory Card 1 AC Adapter with Power Cord 1 Standard Battery 1 Hand Strap 1 DVD-ROM for system driver & manual (in PDF format) If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Rugged Tablet Computer RTC-1000AS Options The following items are normally optional, but some vendors may include them in the standard package. Some items may not be available in some countries, or some vendors may choose not to carry all the items. WLAN/BT module GPS module 3G Modem module Caution: when purchasing any of the accessories listed above, purchase only those accessories that are approved for use with your Rugged Tablet Computer. The above accessories are proprietary items.
Rugged Tablet Computer RTC-1000AS Safety & Maintenance You can use your Rugged Tablet Computer under a wide range of environmental conditions. However, to ensure long use and continued high performance, consider the following factors when setting up your Rugged Tablet Computer (RTC): Follow all warnings and instructions noted in this documentation and in the Windows Help program.
Rugged Tablet Computer RTC-1000AS outlet. Never push foreign objects into the RTC through any of the slots or openings. Dangerous voltages are present, which could cause electric shock or fire, or damage sensitive components. FCC This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Rugged Tablet Computer RTC-1000AS Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Panel PC/ Workstation 有毒有害物质或元素 部件名称 铅 汞 镉 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 硬盘 × ○ ○ ○ ○ ○ 液晶模块 × ○ ○ ○ ○ ○ 光驱 × ○ ○ ○ ○ ○ 触控模块 × ○ ○ ○ ○ ○ 电源 × ○ ○ ○ ○ ○ 印刷电路板 六价铬 多溴联苯 多溴二苯醚 及其电子组件 外部信号 连接器及线材 外壳 中央处理器 与内存 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材
Rugged Tablet Computer RTC-1000AS Contents Chapter 1 Introduction 1.1 Getting Started .......................................................... 1-2 1.2 Features .................................................................... 1-3 1.3 Where to Look For Information ................................. 1-4 1.4 Quick Start ................................................................. 1-5 1.5 Loading Windows ...................................................... 1-6 1.6 Adjusting the Volume .............
Rugged Tablet Computer RTC-1000AS 3.2 Top Side Connectors................................................. 3-4 Chapter 4 Power Management 4.1 Power Management .................................................. 4-2 4.2 When to Replace the Battery .................................... 4-4 4.3 Heat Considerations .................................................. 4-4 Appendix A Statements A.1 Statements .............................................................A-2 A.2 European Notice ....................
Rugged Tablet Computer RTC-1000AS Chapter 1 Introduction Chapter 1 Introduction 1- 1
Rugged Tablet Computer RTC-1000AS 1.1 Getting Started Congratulations on your purchase of a Rugged Tablet Computer (RTC). The RTC is a fully functional PC with built-in LAN, and wireless connectivity. With your RTC you will be able to organize and access important business and personal information. In addition, you will be able to send and receive e-mail and access the Internet. This Manual contains all the information you need to set up and use your RTC.
Rugged Tablet Computer RTC-1000AS 1.2 Features Software Included Widows® Embedded Standard 2009 Edition which includes: • Microsoft® Internet Explorer • Microsoft® Outlook Express • Microsoft® Windows Media Player High performance Processors Ultra Low Voltage Mobile Intel® Atom Processor 1.6GHz CPU High Capacity Hard Disk Drive The Rugged Tablet Computer has a high capacity hard disk drive, to store your favorite programs and large multimedia files.
Rugged Tablet Computer RTC-1000AS 1.3 Where to Look For Information About Your RTC This User’s Manual describes the key elements of your RTC. New users can find a simple step-by-step orientation in the Quick Start section of this Chapter. About Windows Windows Online Help, found on the Start menu, offers extensive Windows assistance. Welcome to Windows offers an online orientation for new Windows users. Find it in: Start/Programs/Accessories/System Tools.
Rugged Tablet Computer RTC-1000AS 1.4 Quick Start Turning on the Rugged Tablet Computer for the First Time 1. Connect the AC adapter power cord to the AC adapter. 2. Connect the AC adapter to the DC power port on the bottom side of your RTC. 3. Connect the AC adapter power cord to an AC outlet. 4. Press the power button to turn on the power. Note: The battery is not fully charged. Allow your battery to fully charge before using it (i.e., before disconnecting AC power).
Rugged Tablet Computer RTC-1000AS 1.5 Loading Windows The following section is for the Windows operating system only. If you are installing a different operating system, please check with your vendor for installation details. Your RTC will begin loading Windows once you turn on the power. Wait a few seconds for Windows setup to load. The Welcome to Windows screen will appear. You may disable this feature by clearing the check box labeled show this screen each time Windows starts.
Rugged Tablet Computer RTC-1000AS 1.6 Adjusting the Volume You can adjust the volume with hot key: z Fn + Arrow Up: volume up z Fn + Arrow Down: volume down Alternatively, you can adjust the volume with the Windows volume control applet located on the taskbar.
Rugged Tablet Computer RTC-1000AS 1.
Rugged Tablet Computer RTC-1000AS 1.8 Turning off your RTC Turning off the RTC properly is important to maintaining the RTC. 1. On the Start menu, click Shut Down. 2. Click the radio button next to Shut Down in the Shut Down Windows screen, and then click OK. If you are going to be away from the RTC for a short period, there are ways of conserving power without shutting down the system. Warning: Shutting off the RTC improperly may result in data loss.
Rugged Tablet Computer RTC-1000AS Chapter 2 Getting Started Chapter 2 Getting Started 2-1
Rugged Tablet Computer RTC-1000AS Hardware and Software This chapter introduces the different components and controls of your RTC, including the hardware components, the software, and the audio and video systems. Getting Started Before you begin using your RTC, read this chapter to familiarize yourself with the main components installed in the system.
Rugged Tablet Computer RTC-1000AS 2.
Rugged Tablet Computer RTC-1000AS Right and Bottom View COM Port Microphone-in VGA Port Audio out CompactFlash Docking Connector RJ-11 DC-adapter Port Rear View Stylus Tether Chapter 2 Getting Started 2 - 4 USB x 2
Rugged Tablet Computer RTC-1000AS 2.2 Power Indicators The power indicators show which power source the system is using. They also show battery status and low battery power alerts. The power indicators remain active and viewable even when the LCD panel is closed. Icon Light Blue Green Description Wireless LAN/ Bluetooth is in use RTC is reading from, or writing to the built-in hard disk.
Rugged Tablet Computer RTC-1000AS 2.3 Front View Buttons The seven hot keys are unique features of your RTC. The function as follows: Icon Function Power Button The power button turns system on and goes into standby automatically. If the unit has been sitting unused for a while. Press momentarily to turn on the system or to exit from standby. Press and hold for at least 3-4 seconds to turn off the system. These settings can be changed.
Rugged Tablet Computer RTC-1000AS Tab Button Under Normal Input Mode: Same function as on a standard keyboard. Under Calculation Mode: Role as “Period” (.). Up/ Down Button Same function as on a standard keyboard. Left/ Right Button Under Normal Mode: Same function as on a standard keyboard. Under Calculation Mode: Arrow Left/ Arrow Right: -/+ Numeric Key Same function as on a standard keyboard.
Rugged Tablet Computer RTC-1000AS 2.4 Function Keys Hold the Fn Key while pressing the function key.
Rugged Tablet Computer RTC-1000AS 2.5 Quick Start Button Function+1 & Quick-Launch Button: Can be customized to launch specific win-base program assigned in Quick Start Button tool. 1. Click on “QSB” icon found at status bar. 2. Click on “Open” to select any application you would like to launch it by individual function key.
Rugged Tablet Computer RTC-1000AS 3. Select execute file and press open. Note: Up to 2 “ Quick Launch” function keys can be assigned to specific application depends on BIOS configuration. 2.6 Connecting the Printer To connect a printer to your RTC via the USB port, use the supplied USB to printer adapter cable. Note: Before use, you must install the driver for the adapter cable. 2.7 The PCMCIA Card Slot Your RTC includes card slot which supports PCMCIA Type II, 32-bit CardBus.
Rugged Tablet Computer RTC-1000AS Some cards may be inserted with power on, while others require that the RTC be turned off. 2.8 CompactFlash (CF) Card Slot The CF card slot can be used as an interface between your RTC and a variety of devices, Insert a CF card in the CF Card Slot as shown below until it snaps into place. Press the eject button to release the card. 2.9 Memory Adding memory allows the RTC to operate faster, handle more tasks simultaneously, and work more smoothly with large files.
Rugged Tablet Computer RTC-1000AS Replacing a Memory Card Warning: Memory modules can be easily damaged by static electricity. Leave the module inside its static-proof bag until it is ready for installation. Removing a Memory Card Turn off the RTC and disconnect the AC adapter. Turn the RTC upside down and lay it on a flat surface. Carefully remove the two RAM compartment cover screws and remove the RAM compartment cover. Carefully remove the GPS module screws, unplug GPS harness then remove GPS module.
Rugged Tablet Computer RTC-1000AS Inserting a Memory Card 1. Hold the memory card by its edges with the edge-connector side towards the slot. 2. Hold the card at a shallow angle (about 25 degrees) and insert the edge connector into the connector slot (3). The “gold teeth” of the edge connector should no longer be visible when the card is fully inserted. 3. Press the card downwards so that it is flat inside the compartment (4).
Rugged Tablet Computer RTC-1000AS 2.10 Communication Components The system includes built-in Fax/Modem. Fax/Modem A phone jack on the top side of the RTC allows you to connect to the Internet to send and receive data. When used with fax software, it can be used as a fax. When using this function, first plug the phone cord into the jack.
Rugged Tablet Computer RTC-1000AS Chapter 3 Making Connections Chapter 3 Making Connections 3-1
Rugged Tablet Computer RTC-1000AS Making connections Your RTC is equipped with a full array of ports and connectors, including standard input/output (I/O) ports for quickly and easily adding peripheral devices such as printers, keyboards, and mice. Refer to documentation included with individual devices for details on connecting these devices to your RTC. 3.1 Right Side Connectors 1 2 3 8 4 7 6 5 1. Microphone-in Jack Connect a microphone this jack to record audio. 2.
Rugged Tablet Computer RTC-1000AS 4. USB (Universal Serial Bus) Ports The Universal Serial Bus (USB) is the latest standard for attaching monitors, input devices, scanners, and other devices to a PC. USB devices can be chained together on a single cable. 5. Fax/Modem RJ-11 Jack The fax/modem can transmit data using the 56 Kbps V.90 protocol, and send and receive faxes at 14.4 Kbps. In some countries, local regulations may not permit the use of the fax/modem designed for this system.
Rugged Tablet Computer RTC-1000AS 3.2 Top Side Connectors 1 2 3 1. LAN RJ-45 Jack With the built-in Ethernet LAN combo, you can make LAN connections without installing PC cards. Connection speed is 10/100/1000 Mbps. When using the LAN function, wrap your LAN cable around the EMI ferrite suppression box to inhibit electromagnetic interference. Warning: Plug your modem into an analog telephone jack only. Most homes use analog lines.
Rugged Tablet Computer RTC-1000AS 3. Mini USB port The Universal Serial Bus (USB) is the latest standard for attaching monitors, input devices, scanners, and other devices to a PC. USB devices can be chained together on a single cable. This mini-USB port can only play as host role.
Rugged Tablet Computer RTC-1000AS Chapter 4 Power Management Chapter 4 Power Management 4 - 1
Rugged Tablet Computer RTC-1000AS 4.1 Power Management Checking the Battery Level You can check the remaining battery power in the Windows® battery status indicator located at the lower right-hand corner of the task tray. The Battery Status icon only appears in the task tray while the unit is running on the battery power but not while the unit is running off an external power source through the AC adaptor.
Rugged Tablet Computer RTC-1000AS Low Battery Alarms How your RTC responds to a low battery condition is set under Start/ Control Panel / Power Options / Alarms. Two different power alarms can be enabled or disabled: the Low Battery Alarm, and the Critical Battery Alarm. Warning: When battery power is low, the battery indicator will flash red, and the alarm will display a warning on your screen. Take immediate action, such as saving files or connecting to the AC adapter, or data may be lost.
Rugged Tablet Computer RTC-1000AS 4.2 When to Replace the Battery Over time, the battery's capacity gradually decreases. We recommend that you replace your battery when you notice that it begins to store significantly less charge. Changing the Battery Change the main battery pack as follows: 1. Turn off the RTC. 2. To replace the Battery remove the screw and the Battery Bay Cover shown right 3. Make sure the replacement battery is properly orientated. Then insert the battery into the battery compartment.
Rugged Tablet Computer RTC-1000AS Calibrating the Touch Screen 1. Click the Windows® Start button > Control Panel > Switch to Classic View > TouchSet Utility Settings. Under the calibration tab, click Calibrate and follow the on-screen instructions shown below. 2. Click the stylus in the middle of the crosshairs. The wheel moves to another location on-screen. 3. Repeat the exercise as above several times until the screen returns to the Calibration Applet 4.
Rugged Tablet Computer RTC-1000AS Appendix A Statements Appendix A Statements A-1
Rugged Tablet Computer RTC-1000AS A.1 Statements Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Rugged Tablet Computer RTC-1000AS could void the user's authority to operate the equipment. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Declaration of Conformity This device complies with part 15 of the FCC rules.
Rugged Tablet Computer RTC-1000AS the telephone company to determine the maximum REN for the calling areas. If the terminal equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. However, if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a compliant with the FCC if you believe it necessary.
Rugged Tablet Computer RTC-1000AS message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual.
Rugged Tablet Computer RTC-1000AS (2000-09) • EN 60950-1: 2001+ All 2004 Regulatory statement (R&TTE / WLAN IEEE 802.11b & 802.11g) European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz; In France, the equipment must be restricted to the 2.4465-2.4835GHz frequency range and must be restricted to indoor use. A.3 Safety CAUTION (AVERTISSEMENT de sécurité) To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Rugged Tablet Computer RTC-1000AS lightning. Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. A.4 Battery Disposal (Recyclage de la batterie) This product contains a Lithium-ion or Nickel-metal Hydride Battery. It must be disposed of properly.
Rugged Tablet Computer RTC-1000AS A.6 Battery CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Regulatory information / Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product.
