Owner manual

Based on interface being used, Optional Cables Kit Assemblies are available for

order. See Table 6.1 for optional GFM cables kit assemblies.

c) Input/Output Jumper Configuration

TABLE 6.1 OPTIONAL GFM CABLES AND MOUNTING KIT ASSEMBLIES

Kit Part

Number

DESCRIPTION

TIO

Input

Communication

Interface Cable

GFM Power

Supply Option

KIT-TM-

Shielded cable with two 9 pins D-con-

nectors for process signals and 6 feet

communication branch

0-5

Vdc

YES 12 and 24 Vdc

KIT-TM-

4 wires cable between GFM RJ11 and

TIO 9 pin D-connector

5-10

Vdc

NO 12 Vdc only

KIT-TM-

Flat 4 wires cable between GFM and

TIO 9 pin D-connectors

0-5

Vdc

NO 12 and 24 Vdc

KIT-TM

GFM flow meter mounting kit,

no cables

N/A N/A N/A

NOTE: For all GFM Kits (except KIT-TM) it is assumed that the power

supplied is connected to the GFM power DC jack connector and the

TIO receiving the power from the GFM.

NOTE: Your TIO device input / output jumpers were configured at

the factory according to your order. There is no need to change input

/ output jumpers’ configuration unless a different input is being

used. Before applying power and process signals, make sure the

input /output jumpers are installed in the correct position

(See Table 6.2).