Instruction Manual

ENGLISH
RM2004 User Instrucon Manual Version 1.0 10
Power Off Timer
This radio has a power-off-timer enhancement feature. The setting for this is accessed by a
long press on the MENU button (system menu), in any mode, and using the >>| or |<< buttons
to select the timer menu. Settings are OFF, AUTO, 30 min, 60 min and 90 min. OFF is the
factory default value where the radio powers off immediately when the ignition key is switched
off. This is the same as conventional radios.
AUTO mode will switch off the radio with the ignition, but you can turn the radio back on (or
off) for a 30-minute period.
30, 60 or 90 minutes will keep the radio playing for this time after the ignition is switched off.
Turning the radio off manually will cancel the timer and the radio will not switch on until the
ignition is also turned on.
This count-down timer is shown on the display using the small secondary line of characters.
In the last 5 minutes of the count-down time the main display will warn the user that the radio
is about to shut down.
This feature extends listening time and allows the ignition key to be removed for safety rea-
sons. It also prevents the battery from being drained if the radio is left turned on for an extend-
ed period. Exact availability of this feature depends on the type of the vehicle since both a
switched ignition “ACC” wire and a permanent battery “B+” wire are used to control this func-
tion and must be connected to the radio.
Menu Reference
SYSTEM MENU
DIS-CON Disconnect current BT device
UNPAIR Forget current BT device
CLK (SET) Set - Hours (down) Minutes (up)
CLK (12/24H) Select 12/24 hour display
BEEP Audible feedback (on/off)
RESET Reset radio to default settings
MANUAL Auto-play USB media on/off
TIMER
Off timer setting (off / AUTO /
30 / 60 / 90min.)
AUDIO MENU
EQ Equalisation presets
LOUD Equal loudness contour on/off
BASS Bass tone control
TREBLE Treble tone control
BALANCE Left/Right balance
FADER Front/Rear fader
DAB/DAB+ (context sensitive items)
SCAN
Scan the whole DAB band for
stations
12V
Switch phantom power to DAB
antenna on/off
PRUNE
Scan and clean up DAB station
list
RADIO (context sensitive items)
LOC Local or DX seek setting
AREA Operating region
RDS Radio Data System
PTY
Select and choose available
content type
AF Alternate Frequencies
TA Traffic Announcement
CT Clock Time & Date
SOFT Soft mute on/off (*)
Menu Reference - Context Sensitive
(*) Soft mute is a noise reduction technique used in FM receivers to
lower the volume when the signal to noise ratio decreases. If you are
in a weak signal area we recommend that you keep this function
OFF to get the maximum received signal even if more background
noise or “hiss” is heard.