User's Manual

Certified : 10801A-ISFM220X : XBD-ISFM2201
The ISFM2201 is designed with an interface to utilize the Steering Wheel Controls
of select vehicles to provide advanced control of a connected iPhone or Android
devices
Note: The following Steering Wheel Contol connection options apply to select vehicles. See
detailed application notes at www.isimplesolutions.com for a list of applicable
vehicles.
OPTION A: SWI Interface
1. Set the 4-position DIP switch to the correct setting for your vehicle (as
outlined in the application notes)
2. YYY Wire. Cut and direct the Steering Wheel control line from select
vehicles to the vehicle to the radio into this connection.
3. ZZZ Wire. Connect this line out of the ISFM2201 to the Steering Wheel
control input of the radio
4. Follow the instructions in the application notes to program the ISFM2201
to recognize the steering wheel controls for your vehicle.
OPTION B SWI interface – vehicles with CAN bus
For vehicles that utilize a CAN communications bus for Steering Wheel Control
communication to the radio, an additional adapter QQQQQQ must first be installed
before making the following connections.
1. TTT Wire. Connect to the AAA line of the QQQQQQ module.
2. VVV Wire. Connect to the BBB line of the QQQQQQ module.
3. Follow the instructions in the application notes to program the
ISFM2201 to recognize the steering wheel controls for your
vehicle.
C. Installing the Microphone for Hands-free Calling
Decide on a mounting location for the microphone either on the headliner or
overhead console. Avoid placing the microphone by the side windows to eliminate
extra noise. Carefully run the microphone cable down into the dash where the
ISFM2201 is to be installed.
Note: The Microphone cable should be routed to avoid interference with
any airbags (ex: side curtain and/or driver’s airbag). The microphone should not
be mounted on the steering wheel or in any manner which would impair proper
operation of the vehicle.
Note: Vehicle Airbags deploy with great force. Consult vehicle service
information for proper handling of the vehicle’s airbags during installation.
When securing the ISFM2201 within the dash cavity of the vehicle, placement of
the module is very important. Bluetooth technology supports devices
communicating wirelessly up to 30 feet away in most cases. However metal
structures inside the dash can reduce the communication between the module and
the Bluetooth device. Please keep this in mind when installing the ISFM2201
module and ensure to place it where it will have the least obstructions from metal
objects.