User guide

Cooling/Preheat Coil Module Feature String Nomenclature
MODULE ID
POSITION
AIRFLOW
BLANK
BLANK
COOLING ROWS
FPI
CKTING
COATING
ACCESSORIES
PREHEAT ROWS
FPI
TYPE
COATING
MODULE ACCESSORY
ACCESS
TYPE
CLD
-
000
-
A
-
0
0
-
A
A
0
0
A
-
C
A
C
0
G
-
B
-
0
18
Cooling/Preheat Module Feature Description
COOLING/PREHEAT MODULE
Module ID
CLA = Chilled Water Coils, External Connection,
Standard Drain Pan (30.5”)
CLC = Chilled Water Coils, Hydronic Preheat,
External Connection, Standard Drain Pan (30.5”)
CLD = DX Coils
CLE = DX Coils, Hot Gas Reheat
CLF = DX Coils, Hydronic Preheat
CLG = DX Coils, Hot Gas Reheat, Hydronic Preheat
CLH = Chilled Water Coils, External Connection,
Short Drain Pan (9”)
CLJ = Chilled Water Coils, Hydronic Preheat,
External Connection, Short Drain Pan (9”)
Position
### = Level and Position of Module in Air Handling
Unit
Compartment Pressurization
0 = Blow-Through, No End Wall
A = Draw-Through, No End Wall
B = Blow-Through, Air Leaving Side End Wall
Blank
00 = Standard
COOLING COIL
Rows
0 = 4 Rows, 1/2” Tubes, 50/50 Split
A = 6 Rows, 1/2” Tubes, 50/50 Split
B = 8 Rows, 1/2” Tubes, 50/50 Split
C = 4 Rows, 5/8” Tubes, 50/50 Split
D = 6 Rows, 5/8” Tubes, 50/50 Split
E = 8 Rows, 5/8” Tubes, 50/50 Split
FPI
0 = 8 FPI, 0.0060” Fin Thick, 0.017” Tube Wall
A = 10 FPI, 0.0060” Fin Thick, 0.017” Tube Wall
B = 12 FPI, 0.0060” Fin Thick, 0.017” Tube Wall
C = 8 FPI, 0.0075” Fin Thick, 0.017” Tube Wall
D = 10 FPI, 0.0075” Fin Thick, 0.017” Tube Wall
E = 12 FPI, 0.0075” Fin Thick, 0.017” Tube Wall
F = 8 FPI, 0.0100” Fin Thick, 0.017” Tube Wall
G = 10 FPI, 0.0100” Fin Thick, 0.017” Tube Wall
H = 12 FPI, 0.0100” Fin Thick, 0.017” Tube Wall
J = 8 FPI, 0.0060” Fin Thick, 0.025” Tube Wall
K = 10 FPI, 0.0060” Fin Thick, 0.025” Tube Wall
L = 12 FPI, 0.0060” Fin Thick, 0.025” Tube Wall
M = 8 FPI, 0.0075” Fin Thick, 0.025” Tube Wall
N = 10 FPI, 0.0075” Fin Thick, 0.025” Tube Wall
P = 12 FPI, 0.0075” Fin Thick, 0.025” Tube Wall
Q = 8 FPI, 0.0100” Fin Thick, 0.025” Tube Wall
R = 10 FPI, 0.0100” Fin Thick, 0.025” Tube Wall
S = 12 FPI, 0.0100” Fin Thick, 0.025” Tube Wall
T = 8 FPI, 0.0060” Fin Thick, 0.035” Tube Wall
U = 10 FPI, 0.0060” Fin Thick, 0.035” Tube Wall
V = 12 FPI, 0.0060” Fin Thick, 0.035” Tube Wall
W = 8 FPI, 0.0075” Fin Thick, 0.035” Tube Wall
Y = 10 FPI, 0.0075” Fin Thick, 0.035” Tube Wall
Z = 12 FPI, 0.0075” Fin Thick, 0.035” Tube Wall
1 = 8 FPI, 0.0100” Fin Thick, 0.035” Tube Wall
2 = 10 FPI, 0.0100” Fin Thick, 0.035” Tube Wall
3 = 12 FPI, 0.0100” Fin Thick, 0.035” Tube Wall