User's Manual

the system will shut automatically
【Note】When the device with low battery it will alarm continuous and shut automatically without
charging. If the device can not start up please check if the battery is low, and try it again after the
battery is charged.
3.4 Battery management and charging.
3.4.1 Charge the battery for 6-8 hours to make sure the battery is fully charged when firstly use.
3.4.2 Insert the micro port of the battery adaptor into DC slot on the device, and connect the other
side with the power socket. Then the desktop icon of the battery keep rolling which shows it is
charging, please wait until the battery is fully charged, don’t disconnect the power when charging.
Once the battery is fully charged, the Icon on the desktop will stop rolling.
【Note】In order to keep the battery working in the best condition, please pay attention as below:
Please don’t charge the power in high temperature.
No need to release the power for this Li- battery, you can charge the power even there is still
some power in the battery, no need to wait it runs out.
In order to keep the battery in good condition, please make sure to charge the power once per
two weeks if you don’t use this device for a long time.
3.5 Definition for the icons of the Functions
Icon
Function
instruction
Icon
Function instruction
Back to main menu
Note when the system
finds new devices.
Show current
power status
Set the alert time
The current
system time
Reduce the volume