Operation Manual

1.4 Getting started 15

Audio Conﬁguration

Audio conﬁguration tools are available from the Audio menu. The Audio Settings

function allows you to select an audio output device from a list, organized by driver

type, of those available on your computer. On Windows, if you have ASIO drivers

available, these should be selected for optimum performance. Multi-channel inter-

faces will have their outputs listed as stereo pairs.

• Select your sound card port from the list in the Audio Conﬁguration dialog

from the Audio > Audio Settings ... menu.

For more detailed information on audio conﬁguration, sampling rate selection

and latency adjustments, please refer to section 6.3.

MIDI Conﬁguration

MIDI conﬁguration tools are available from the MIDI menu.

• Select your MIDI input device from the list in the MIDI Conﬁguration

window available from the MIDI > MIDI Settings . . . menu.

For more detailed information on Audio and MIDI conﬁguration, MIDI links

and MIDI maps, please refer to Chapter 6.

1.4.2 Exploring the factory presets

Factory presets can easily be accessed using the ‘+” and ‘−” buttons in the lower

left corner of the toolbar. These buttons are used to navigate through a list of 128

numbered presets called programs. The content of this program list can be viewed

by clicking on the H button of the toolbar. The number of the current program used

and the name of the associated preset appear on the right of this button. Programs

can also be changed by using the ‘+” and ‘−” keys from the computer keyboard

or by selecting programs directly from the list displayed after clicking clicking on

the H button.

Presets can also be accessed using the browser appearing on the left of Lounge

Lizard Session. This browser is similar to the browser your operating system gen-

erates to display the contents of your hard disk, or your email program uses to

organize your mail and address book. When launching the application for the ﬁrst