Operation Manual

6.2 MIDI Settings 39
• To edit the MIDI link, right-click/Control-click again on the control and
choose Edit MIDI Link to open the MIDI links window. You can also use
the Edit MIDI Link command from the MIDI menu.
• Click on the MIDI link you wish to modify and then on the Edit button to
launch the EDIT MIDI Link window.
• Specify the MIDI controller number and MIDI channel of the physical con-
troller you wish to link to the parameter in the corresponding drop-down
menus.
• You can also adjust the Minimum Value and Maximum Value of the con-
troller, which are used to limit the range of MIDI controllers. The Mini-
mum Value slider is used to determine the position on the Lounge Lizard
Session control which corresponds to the minimum value sent by the MIDI
controller; the Maximum Value slider determines the position which cor-
responds to the maximum value sent by the MIDI controller. The leftmost
position of the slider corresponds to the Lounge Lizard Session control min-
imum position (left position for a knob) while the rightmost position of the
slider corresponds to the Lounge Lizard Session control maximum position
(right position for a knob).
• Note that the range of a knob can be inverted by setting the value of Maxi-
mum Value to a smaller value than that of Minimum Value.
• Click on the OK button and the link appears in the list of controllers linked
to the control.
• Click on the OK button again to confirm the change and to leave the MIDI
Links window.
• Note that the Minimum Value and Maximum Value of a MIDI link can also
be set by right/control clicking on the corresponding control and selecting
the Set MIDI Link Minimum Value or Set MIDI Link Maximum Value
command. The value corresponding to the control position will then be saved
as the minimum or maximum value of the MIDI link.
6.2.4 Deleting MIDI Links
• To remove a MIDI link, right-click/Control-click again on the control and
choose Forget MIDI Link or choose the Forget MIDI Link command from
the MIDI menu.