Operation Manual

1.3 Authorization and Registration 12
ready supplied under the same email address will appear in the form. Feel free
to update this information if it is outdated. Click on the Submit button and your
response key will appear on-screen.
Figure 5: Generation of the response key on the A|A|S server.
If your computer is not connected to the internet, take note of your serial num-
ber and challenge key and proceed to an internet connected computer. Launch your
browser and go to the unlock page of the A|A|S website at:
http://www.applied-acoustics.com/unlock.htm
Enter your email address, serial number, and challenge key, and click next. You
will then receive your response code on-screen as described above.
1.3.3 Step 3: Completing the unlock process
The response key corresponding to your serial number and challenge key will be
printed in your browser window. In order to complete the unlock process, copy the
response key and paste it into the corresponding field of the installer window of
Ultra Analog Session. If you obtained your response key from another computer,
type the response key by hand in the installer window.
Click on the Next button and a pop-up window will appear informing you that
the authorization process has been successful. Click on the Finish button to com-
plete the process and launch Ultra Analog Session.
You will normally only need to go this process once for a given computer
except for some special cases. On Windows computers your will need to unlock
again if: