Operation Manual

7.6 MIDI channel 42
saved the project when you re-open it even if the preset library of the instrument
was modified. MIDI links are also saved.
Note that the default program list (the same as that loaded in standalone mode)
appears when Ultra Analog Session is opened in a new project or if a new instance
of the plug-in is opened in an existing project. To change the default program list,
use the Save All Programs command from the Programs menu in an instance of
the instrument which displays the desired program list.
7.6 MIDI channel
Make sure that the MIDI controller, sequencer and Ultra Analog Session all use the
same MIDI channel. If you are not certain of the channel used by your controller
or sequencer, set the MIDI channel of Ultra Analog Session to Omni.
7.7 MIDI program change
MIDI program changes are supported in the plug-in versions of Ultra Analog Ses-
sion. When a MIDI program change is received by the application, the current
program used by the synthesis engine is changed to that having the same number
as that of the MIDI program change message.
7.8 Performance
Using a plug-in in a host sequencer requires CPU processing for both applications.
The load on the CPU is even higher when multiple instances of a plug-in or nu-
merous different plug-ins are used. To decrease CPU usage, remember that you
can use the freeze of bounce to track functions of the host sequencer in order to
render to audio the part played by a plug-in instead of recalculating it every time it
is played.