480i, 480i C CT,, 9112i, 9 12i, 9133i SIP IP SI I PHONE RN-001033-00 Rev 01 Release Notes Release 1.4.2 Beta RN-001033-00, Rev 00, Release 1.4.
Aastra Telecom will not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, Aastra Telecom will not be liable for technical or editorial errors or omissions contained within this documentation. The information contained in this documentation is subject to change without notice. Copyright 2005-2007 Aastra Telecom. www.aastratelecom.com All Rights Reserved.
Contents General Information ........................................................................................................... 2 Release Content Information ...................................................................................... 2 Hardware Supported ................................................................................................... 2 Bootloader Requirements ........................................................................................... 2 Changes in 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes 1.4.2 About this Document This document provides information specific to the SIP IP Phone release 1.4.2. It includes the following information: • General Information (release content, hardware supported, bootloader requirements, and upgrade notes) • Changes in 1.4.2, Build 3000 • Changes in 1.4.2, Build 1081 • Known Anomalies in Release 1.4.2 • Contacting Aastra Telecom Support RN-001033-00, Rev 01, Release 1.4.
IP Phone Release Notes 1.4.2 General Information General Information Release Content Information This document provides release content information on the Aastra 480i, 480i CT, 9112i, and 9133i SIP IP phone firmware. Model Release Name Release Version Release Filename Release Date 480i Generic SIP 1.4.2 FC-000032-01-13 May 2007 480i CT Generic SIP 1.4.2 FC-000040-00-13 May 2007 9133i Generic SIP 1.4.2 FC-000046-01-13 May 2007 9112i Generic SIP 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes Changes in 1.4.2, Build 3000 Changes in 1.4.2, Build 3000 This section describes the feature enhancements, and issues resolved, in Release 1.4.2, build 3000. Enhancements to “Incoming Call Interrupts Dialing” Feature The “Incoming Call Interrupts Dialing” feature has been enhanced to work more efficiently.
IP Phone Release Notes 1.4.2 Changes in 1.4.2, Build 3000 Intercom Behavior If “Incoming Call Interrupts Dialing” is enabled and you are dialing an outgoing Intercom call, the enabled interrupt setting takes precedence over an enabled “Allow Barge In” setting. The incoming call interrupts your dialing on an outgoing intercom call. On an incoming intercom call, the enabled “Allow Barge In” and “Auto-Answer” occurs while you are dialing to transfer or conference the call.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes Changes in 1.4.2, Build 3000 Issue Number Description of Fix ENH07628 If the subscription service for BLF is terminated (for example, if a server goes down and back up), the IP phone now attempts to automatically resubscribe. You no longer have to reboot the phone in order to initiate BLF subscription.
IP Phone Release Notes 1.4.2 Changes in 1.4.2, Build 1081 Changes in 1.4.2, Build 1081 This section describes the changes made, and issues resolved, in Release 1.4.2, build 1081. Note: Unless specifically indicated, these enhancements apply to all phone models. Issue Number Description of Fix CLN05048 XML: AastraIPPhoneTextMenu object now supports turning off automatic numbering of items.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes Changes in 1.4.2, Build 1081 Issue Number Description of Fix DEF04481 Added an additional VLAN mode which enables the phone to be on a VLAN. All untagged packets are sent to the passthrough port. To enable this mode, you enable tagging on the phone port as normal, but set the passthrough VLAN ID to 4095,. For example, the following configures the phone to be on VLAN 3 but the passthrough port is configured as untagged.
IP Phone Release Notes 1.4.2 Changes in 1.4.2, Build 1081 Issue Number Description of Fix ENH05218 A User and Administrator can now configure whether or not an incoming call interrupts an outgoing call that is dialing. A new parameter has been added (“incoming call interrupts dialing”) to control this feature. When you enable this parameter (1 = enable), an incoming call interrupts the outgoing call during dialing and allows the phone to ring for the user to answer the incoming call.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes Changes in 1.4.2, Build 1081 Issue Number Description of Fix ENH05637 The IP phones no longer support the alpha character in the password. Non-numeric passwords are ignored in release 1.4.2 and all subsequent releases. The default password is used instead. ENH05953 Release 1.4.2 includes the support of new changes in the North American Daylight Savings Time starting March 11, 2007.
IP Phone Release Notes 1.4.2 Changes in 1.4.2, Build 1081 Issue Number Description of Fix ENH06372 A User and Administrator can now configure the Goodbye key to drop active calls or ignore incoming calls. A new parameter has been added (“goodbye cancels incoming call") which controls the behavior of the goodbye key when the phone is in an active call and a second call is presented to the phone. When you enable this parameter (1 = enable), which is the default, the Goodbye key rejects the incoming call.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes Changes in 1.4.2, Build 1081 Issues Resolved in 1.4.2, Build 1081 This section describes the issues resolved in Release 1.4.2, build 1081. The following table provides the issue number and a brief description of each fix. Note: Unless specifically indicated, these resolved issues apply to all phone models. Issue Number Description of Fix CLN04782 XML: "alert" status message type now displays for the correct amount of time.
IP Phone Release Notes 1.4.2 Changes in 1.4.2, Build 1081 Issue Number Description of Fix DEF03717 Incoming Intercom calls no longer go to headset when an existing speakerphone call is on hold. DEF04448 URIs are now used in subsequent REFER-TO addresses. DEF04717 9133i: The Message Waiting Indicator (MWI) light now continues to flash after receiving a call. DEF04970 Hanging up the handset now correctly executes the “Action URI Onhook”.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes Changes in 1.4.2, Build 1081 Issue Number Description of Fix DEF06417 The “sip update callerid” parameter in the configuration files now works correctly on all phone models. DOC06909 In Appendix A of the 1.4.1 Administrator Guide Revision 10, the following corrections were made and can be found in the 1.4.
IP Phone Release Notes 1.4.2 Known Anomalies in Release 1.4.2 Known Anomalies in Release 1.4.2 This section describes the known anomalies in release 1.4.2. Note: Unless specifically indicated, these known anomalies apply to all phone models. Issue Number Description DEF04535 480i and 480i CT: The TO field displays your own name during an originated call. When you place a call, and the other side answers, your phone screen displays your own line’s name in the “TO” field.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes Contacting Aastra Telecom Support Contacting Aastra Telecom Support If you’ve read this release note, and consulted the Troubleshooting section of your phone model’s manual and still have problems, please send inquiries via email to support@aastra.com. RN-001033-00, Rev 01, Release 1.4.
Generic SIP IP Phone Models 480i, 480i CT, 9112i, 9133i 1.4.2 Release Notes Copyright © 2005-2007 Aastra Telecom. All rights reserved. Information in this document is subject to change without notice. Aastra Telecom assumes no responsibility for any errors that may appear in this document. Product capabilities described in this document pertain solely to Aastra Telecom's marketing activities in the U.S. and Canada. Availability in other markets may vary. SIP IP Phones Release 1.4.