SIP IP Phone Administrator Guide

Operational Features
5-192 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Configuring the ACD Auto-Available Timer Using the Aastra Web UI
Use the following procedure to configure an ACD auto-available timer using the
Aastra Web UI.
4 In the “Line” field, select the line which the IP phone uses to subscribe to the queue.
For example: Line 1
5 Click to save your changes.
Aastra Web UI
1 Click on Basic Settings->Preferences->Auto Call Distribution Settings.
2 In the “Auto Available” check-box, click Enabled.
3 In the “Auto Available Timer” field, specify the length of time (in seconds) before the IP phone
state is automatically reset to “available.” Valid values are 0 to 120 seconds. Default is 60.
For example: 60
4 Click to save your changes.
Aastra Web UI
Draft 1