480i, 480i CT, 9112i, 9133i SIP IP PHONE 41-001024-00 Rev 09 Release Notes Release 1.4.
Aastra Telecom will not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, Aastra Telecom will not be liable for technical or editorial errors or omissions contained within this documentation. The information contained in this documentation is subject to change without notice. Copyright 2005-2006 Aastra Telecom. www.aastra.com All Rights Reserved.
About this Document ...................................................................................................... 1 General Information ........................................................................................................ 2 Release Content Information ...................................................................................... 2 Hardware Supported ...................................................................................................
Contents IP Phone Features for Sylantro Servers ................................................................... 40 Last Call Return (lcr) Support ............................................................................. 40 How it works ....................................................................................................... 40 Support for additional “Alert Info” keywords for distinctive ringing...................... 41 Startup Enhancement ..............................................
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes 1.4.1 About this Document This document provides information specific to the SIP IP Phone release 1.4.1. It includes the following information: • General Information (release content, hardware supported, bootloader requirements, and upgrade notes) • New Features in 1.4.1 • Issues Resolved in Release 1.4.1 • Known Anomalies in 1.4.1 • Contacting Aastra Telecom Support 41-001024-00, Rev 09, Release 1.4.
IP Phone Release Notes 1.4.1 General Information General Information Release Content Information This document provides release content information on the Aastra 480i, 480i CT, 9112i, and 9133i SIP IP phone firmware. Model Release Name Release Version Release Filename Release Date 480i Generic SIP 1.4.1 FC-000032-01-09 November 2006 480i CT Generic SIP 1.4.1 FC-000040-00-09 November 2006 9112i Generic SIP 1.4.1 FC-000058-01-09 November 2006 9133i Generic SIP 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes General Information Upgrade Notes This section provides notes that customers should be aware of before upgrading to IP phone firmware release 1.4.1. Aastra Telecom recommends that customers read this section completely and thoroughly prior to the upgrade to avoid any known issues with the upgrade process. • The recommended base IP Phone firmware to upgrade to this new firmware release is 1.2.2 or above.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 New Features in 1.4.1 Description This section describes the features new to the IP phones in release 1.4.1. The features apply to all IP Phone models (480i, 480i CT, 9112i, and 9133i), unless specifically stated that only a particular IP phone model supports the feature. The following table lists the new features in release 1.4.1. The paragraphs following this table describe each feature in detail.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Feature Description Page Last Number Redial A user can now press the REDIAL key to dial the last number page 15 dialed. They can also press the REDIAL button once, scroll the list of numbers, then press the REDIAL button again to dial the number that displays on the screen.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Feature Description Page IP Phone Features for Sylantro Servers The following are new features added to the IP phones for Sylantro servers: Last Call Return (lcr) Support - A new feature has been added to the IP phones that allow a user or administrator to configure a "last call return" function on a softkey or programmable key. This feature is for Sylantro servers only.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 SIP Timers The following paragraphs describe SIP timers that have been added or changed in Release 1.4.1. SIP Registration Renewal Timer A new parameter has been added to the IP phones that enables an administrator to control when registration renewals occur.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Configuring via the Aastra Web UI You can set the Registration Renewal Timer in the Aastra Web UI at Advanced Settings->Global SIP->Advanced SIP Settings. Registration Renewal Timer 8 41-001024-00, Rev 09, Release 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 SIP Registration Timeout Retry Timer An administrator can now set the length of time, in seconds, that the phone waits until it re-attempts to register after a REGISTER message times out. This parameter is called, sip registration timeout retry timer, and is configurable via the configuration files and the Aastra Web UI.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Configuring via the Aastra Web UI You can set “Registration Timeout Retry Timer” in the Aastra Web UI at Advanced Settings->Global SIP->Advanced SIP Settings. Registration Timeout Retry Timer “SIP Registration Retry Timer” Web UI Parameter Name Change In the Aastra Web UI only, the registration retry timer parameter name has been changed to “registration failed retry timer”. The functionality of this parameter has not changed.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Explicit Message Waiting Indicator (MWI) Subscription Period The IP phones support a new feature for MWI that allows the administrator to set a requested duration, in seconds, before an explicit MWI subscription times out. The phone re-subscribes to MWI before the subscription period ends. The new parameter you can configure is “sip explicit mwi subscription period”.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Configuring via the Aastra Web UI You configure “Explicit MWI Subscription Period” in the Aastra Web UI at Advanced Settings->Global SIP->Advanced SIP Settings. Explicit MWI Subscription Period 12 41-001024-00, Rev 09, Release 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Prefix Dialing The IP phones now support a prefix dialing feature for outgoing calls. How it works You can manually dial a number or dial a number from a list. The phone automatically maps the pre-configured prepended digit in the configuration, to the outgoing number. When a match is found, the prepended digits are added to the beginning of the dial string and the call is dialed.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Example If you enter the following dial string for a local dial plan: sip dial plan: 1+#,9 where “9” is the prepended digit, and you dial the following number: 15551212 the IP phone automatically adds the “9” digit to the beginning of the dialed number before the number is forwarded as 915551212. Configuring via the Configuration Files You use the following parameter to configure local dial plan with a prepended digit(s).
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Range Up to 127 alphanumeric characters Example sip dial plan: "1X+#,9” Configuring via the Aastra Web UI You configure a local dial plan string in the Aastra Web UI at Basic Settings->Preferences. The following illustration shows a Local Dial Plan dial string in the Aastra Web UI using a prepended digit.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 XML Objects and Enhancements The following paragraphs describe the XML enhancements in release 1.4.1. XML: AastraIPPhoneStatus object A new XML AastraIPPhoneStatus object has been implemented on the IP phones. This object provides the ability to display a status message on a single designated line on the phone’s idle screen when XML information is pushed from the servers. The 480i/480i CT phones display messages on the second line in the phone window.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 The ”My Session ID” attribute must be unique to the application sending the XML object to the phone. The application generates the session ID, which could be a combination of letters and numbers. There is a maximum of one tag per PhoneStatus object, so the tag is optional.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Beep Option You can enable or disable a BEEP option in the AastraIPPhoneStatus object. When the phone receives a status message, the BEEP notifies the user that the message is being displayed. The following attribute enables/disables the BEEP from being heard: < AastraIPPhoneStatus Beep="yes|no"> (case sensitive) This attribute is optional. If notification is required, the attribute must be in the ROOT. If the BEEP attribute is set to "yes" (i.e.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Configuring via the Configuration Files You enable/disable the BEEP option using the following parameter in the configuration files: Parameter – xml beep notification Aastra Web UI Basic Settings->Preferences Configuration Files aastra.cfg, .
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Configuring via the Aastra Web UI You enable/disable the BEEP option in the Aastra Web UI at Basic Settings->Preferences. XML Beep Support 20 41-001024-00, Rev 09, Release 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Scroll Delay Option The IP phones support a scroll delay option that allows you to set the time delay, in seconds, between the scrolling of each status message on the phone. The default time is 5 seconds for each message to display before scrolling to the next message. You can configure this option via the configuration files or the Aastra Web UI. Changes are dynamic and apply to the phone immediately.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Configuring via the Aastra Web UI You set the scroll delay option in the Aastra Web UI at Basic Settings->Preferences. Status Scroll Delay (seconds) 22 41-001024-00, Rev 09, Release 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 XML: AastraIPPhoneExecute Object A new XML AastraIPPhoneExecute object has been implemented on the IP phones. This object provides the ability to execute commands on the phone using XML. Release 1.4.1 supports the following Execute object commands: • Reset - This command waits until the phone is idle and then executes a reset. • NoOp - This command has no affect on the IP phone. It is made up of a blank URI.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Using the Reset Command The tag can be entered with the command the phone should execute. Upon receiving an AastraIPPhoneExecute object, the phone begins executing the URL or URI specified.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 XML: Action URI This feature provides the administrators the ability to specify a uniform resource identifier (URI) that triggers a GET when certain events occur.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 How it works When a startup, successful registration, incoming call, outgoing call, offhook, or onhook call event occurs on the phone, the phone checks to see if the event has an action URI configured. If the phones finds a URI configured, any variables configured (in the form $$VARIABLENAME$$) are replaced with the value of the appropriate variable. After all of the variables are bound, the phone executes a GET on the URI.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Parameter – action uri registered Aastra Web UI Configuration Files Advanced Settings->Action URI aastra.cfg, .cfg Successful Registration (in Web UI) Description Specifies the URI for which the phone executes a GET on when a successful registration event occurs.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Parameter – action uri outgoing Aastra Web UI Configuration Files Advanced Settings->Action URI aastra.cfg, .cfg Outgoing Call (in Web UI) Description Specifies the URI for which the phone executes a GET on when an outgoing call event occurs.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Parameter – action uri onhook Aastra Web UI Configuration Files Advanced Settings->Action URI aastra.cfg, .cfg Onhook (in Web UI) Description Specifies the URI for which the phone executes a GET on when an onhook event occurs. Format Fully qualified URI Default Value Not Applicable Range Up to 128 ASCII characters Example action uri onhook: http://10.50.10.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 XML: Softkey URI In addition to specifying variables for the Action URIs, you can also specify variables in the XML softkey URIs that are bound when the key is pressed. These variables are the same as those used in the Action URIs.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Configuring via Configuration Files You use the following parameters to configure XML softkeys using variable binding: • softkeyN type • softkeyN label • softkeyN value • prgkeyN type • prgkeyNvalue For example, on a 480i/480i CT: softkey1 type: xml softkey1 label: JohnSmith softkey1 value: http://10.50.10.140/script.pl?name=$$SIPUSERNAME$$ On a 9112i/9133i: prgkey1 type: xml prgkey1 value: http://10.50.10.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Configuring via the Aastra Web UI For 480i/480i CT, you configure XML softkey variable binding at Operation->Softkeys and XML. For 9112i/9133i, you configure XML softkey variable binding at Operation->Programmable Keys. XML Softkey configured using variable binding 32 41-001024-00, Rev 09, Release 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 XML: HTTP Refresh Header A new HTTP refresh header feature has been implemented on the IP phones. This feature includes the following: • All current XML screen objects have the ability to be refreshed by adding a Refresh and URL setting to the HTTP headers. (see Refresh setting format below) • The Refresh setting is set by the XML application and it is up to the application to decide which objects it wants to refresh.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Backup Proxy/Registrar Support The IP phones now support a backup SIP proxy and backup SIP registrar feature. If the primary server is unavailable, the phone automatically switches to the backup server allowing the user's phone to remain in service. How it Works All SIP registration messages are sent to the primary registrar first. If the server is unavailable, then a new registration request is sent to the backup registrar.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Parameter – sip backup proxy port Aastra Web UI Configuration Files Advanced Settings->Global SIP-> Basic SIP Network Settings aastra.cfg, .cfg Backup Proxy Port (in Web UI) Description The backup proxy’s port number.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Parameter – sip backup registrar port Aastra Web UI Configuration Files Advanced Settings->Global SIP-> Basic SIP Network Settings aastra.cfg, .cfg Backup Registrar Port (in Web UI) Description The backup registrar's (typically the backup SIP proxy) port number.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Parameter – sip linex backup registrar ip Aastra Web UI Configuration Files Advanced Settings->LineN-> Basic SIP Network Settings aastra.cfg, .cfg Backup Registrar Server (in Web UI) Description The address of the backup registrar (typically, the backup SIP proxy) for which the IP phone uses to send REGISTER requests if the primary registrar is unavailable. A global value of 0.0.0.0 disables backup registration.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Configuring via the Aastra Web UI For global configuration, you can set the backup SIP proxy/registrar parameters at Advanced Settings->Global SIP->Basic SIP Network Settings. For per-line configuration, you can set the backup SIP proxy/registrar parameters at Advanced Settings->LineN->Basic SIP Network Settings. Backup SIP Proxy/ Registrar Parameters 38 41-001024-00, Rev 09, Release 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Auto-discovery Using mDNS Release 1.4.1 introduces a process that allows the phones to auto-discover all servers on a network using mDNS. When the IP phone discovers a TFTP server, it is automatically configured by that TFTP server. An unconfigured phone (phone right out of the box) added to a network, attempts to auto-discover a configuration server on the network without any end-user intervention.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 IP Phone Features for Sylantro Servers Last Call Return (lcr) Support A new feature has been added to the IP phones that allow a user or administrator to configure a "last call return" function on a softkey or programmable key. This feature is for Sylantro servers only. You can configure the “lcr” softkey feature via the configuration files and the Aastra Web UI.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Support for additional “Alert Info” keywords for distinctive ringing New configurable, distinctive ringing support has been added to release 1.4.1 for Sylantro servers.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Parameter – alert community 1 Aastra Web UI Configuration Files Basic Settings->Preferences-> Priority Alerting Settings aastra.cfg, .cfg community-1 (in Web UI) Description When an "alert community-1” keyword appears in the header of the INVITE request, the configured Bellcore ring tone is applied to the IP phone.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Parameter – alert community 3 Aastra Web UI: Configuration Files: Basic Settings->Preferences-> Priority Alerting Settings aastra.cfg, .cfg community-3 (in Web UI) Description When an "alert community-3” keyword appears in the header of the INVITE request, the configured Bellcore ring tone is applied to the IP phone.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 Configuring via the Aastra Web UI You can configure the new parameters for priority alerting in the Aastra Web UI at Advanced Settings->Action URI. New priority alert parameters 44 41-001024-00, Rev 09, Release 1.4.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Startup Enhancement During startup, the maximum time the phone spends attempting to contact the configuration server (TFTP, FTP or HTTP) has been reduced from 10 minutes to approximately 30 seconds. When the phone boots up, it attempts to contact the configuration server (if the configuration server parameters are configured on the phone), for 4 seconds. The phone then displays a “Skip” button.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 480i CT Only Single Call Restriction (480i CT only) A new feature has been implemented on the 480i CT that allows an administrator to enable or disable a single call restriction between the 480i CT base unit and a call server. When this feature is enabled (set to 1), you can make separate active calls from the 480i CT base unit and from the cordless handset.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Default Value 1 Range 0 - Disable 1 - Enable Example two call support: 0 Configuring via the Aastra Web UI You can enable or disable the 480i CT single media path restriction at Advanced Settings->Global SIP->RTP Settings. Two Call Support 41-001024-00, Rev 09, Release 1.4.
IP Phone Release Notes 1.4.1 New Features in 1.4.1 9112i/9133i Only Addition of DisplayName1 & DisplayName2 (now also applies to 9112i/ 9133i) The 9112i/9133i IP phones now support the use of displayName1 and displayName2. The value in these fields display on the idle screen of the IP phone. Previous IP phone releases supported these parameters on the 480i/480i CT only. You can configure these parameters via the configuration files or the Aastra Web UI.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes New Features in 1.4.1 Parameter – displayName2 Aastra Web UI Configuration Files Basic Settings->Preferences aastra.cfg, .
IP Phone Release Notes 1.4.1 Issues Resolved in Release 1.4.1 Issues Resolved in Release 1.4.1 Description This section describes the issues resolved in release 1.4.1. The following table provides the issue number and a brief description of each fix. Note: Unless specifically indicated, these resolved issues apply to all phone models. Issue Number Description of Fix CLN04606 With the 480i, the phone no longer hangs on startup when global call park and call pickup keys are configured.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes Issues Resolved in Release 1.4.1 Issue Number Description of Fix DEF04757 The call transfer (Xfer) function was not working with Broadsoft SCA using multiple headers. The call transfer now works on an SCA line with Broadsoft R13. DEF05117 If the CODEC negotiation fails during the processing of a re-INVITE, the phone no longer drops the call, but instead responds with a “488 Not Acceptable Here” message.
IP Phone Release Notes 1.4.1 Known Anomalies in 1.4.1 Known Anomalies in 1.4.1 Description This section describes the known anomalies in release 1.4.1. Note: Unless specifically indicated, these known anomalies apply to all phone models. Issue Number Description DEF04448 SIP contact URI is not used in subsequent REFER-TO address. DEF04535 The TO field displays your own name during an originated call. DEF04899 In XML APIs, password is not hidden when it is marked as not editable.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes Contacting Aastra Telecom Support Contacting Aastra Telecom Support If you’ve read this release note, and consulted the Troubleshooting section of your phone model’s manual and still have problems, please send inquiries via email to support@aastra.com. 41-001024-00, Rev 09, Release 1.4.
Generic SIP IP Phone Models 4801, 480i CT, 9112i, 9133i 1.4.1 Release Notes Copyright © 2005-2006 Aastra Telecom. All rights reserved. Information in this document is subject to change without notice. Aastra Telecom assumes no responsibility for any errors that may appear in this document. Product capabilities described in this document pertain solely to Aastra Telecom's marketing activities in the U.S. and Canada. Availability in other markets may vary. 41-001024-00 Rev 09 SIP IP Phones Release 1.4.