51i, 53i, 55i, 57i, and 57i CT SIP IP SI I PHONE RN-001029-00 Rev 06 Release Note Release 2.
Aastra Telecom will not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, Aastra Telecom will not be liable for technical or editorial errors or omissions contained within this documentation. The information contained in this documentation is subject to change without notice. Copyright 2008 Aastra Telecom. www.aastra.com All Rights Reserved.
General Information ........................................................................................................ 2 Release Content Information ...................................................................................... 2 Hardware Supported ................................................................................................... 2 Bootloader Requirements ........................................................................................... 2 Features in Release 2.2......
Contents BroadSoft Interoperability Features ........................................................................ 126 CMS Support .................................................................................................... 126 Server-Side Do Not Disturb (DND), Call Forward (CFWD) , and Automatic Call Distribution (ACD) Support ................................................ 130 Issues Resolved on Series 5i Phones in Release 2.2 ..............................................
SIP IP Phone Models 51i, 53i, 55i, 57i, and 57i CT Release Note 2.2 About this Document This document provides an overview of the 2.2 features on the 5i Series phones (51i, 53i, 55i, 57i, and 57i CT). For more detailed information about the features associated with each phone, and for information on how to use the phones, see your model-specific SIP IP Phone Installation Guide and the SIP IP Phone User Guide. For detailed information about more advanced features, see the SIP IP Phone Administrator Guide.
IP Phone Release Notes 2.2 General Information General Information Release Content Information This document provides release content information on the Aastra 51i, 53i, 55i, 57i, and 57i CT SIP IP phone firmware. Model Release Name Release Version Release Filename Release Date 51i Generic SIP 2.2 FC-001126-00-06 March 2008 53i Generic SIP 2.2 FC-001086-00-09 March 2008 55i Generic SIP 2.2 FC-001087-00-09 March 2008 57i Generic SIP 2.
5i Series IP Phone Release Notes Features in Release 2.2 Features in Release 2.2 Description This section describes the new features included in Release 2.2 of the 5i Series IP Phones. The following table specifies the 2.2 Features and provides the page number for each feature.
IP Phone Release Notes 2.2 Features in Release 2.2 Feature Page Number BroadSoft Interoperability Features CMS Support page 126 Server-Side Do Not Disturb (DND), Call Forward (CFWD) , and Automatic Call Distribution (ACD) Support page 130 4 RN-001029-00, Rev 06, Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 Usability Features Dial Plan Support for Secondary Dial Tone The IP phones now support a feature that allows the user to dial a predefined dial string, obtain a dial tone, and continue dialing. A User or Administrator can configure this using the existing Dial Plan feature on the phone. You can enter a new character string in the dial plan that allows you to configure the secondary dial tone. The character string is of the form ".;.
IP Phone Release Notes 2.2 Features in Release 2.2 Account-Based Do Not Disturb (DND) and Call Forward (CFWD) In previous releases of the IP Phone, you could configure a DND key to set “do not disturb” on all the lines on the phone. Also in previous releases, you could configure CFWD on all lines (global settings) or on specific lines (local settings) on the phone. In Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 The following describes the softkey behavior for each DND mode. • Account - DND key toggles the account in focus on the IP Phone UI, to ON or OFF if DND enabled for that account. • Phone - DND key toggles all accounts on the phone to ON or OFF. • Custom - DND key displays custom screens on the IP Phone UI. User can select whether to enable/disable DND per account, enable DND on all accounts, or disable DND on all accounts.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring DND Using the Configuration Files You use the following parameters to configure DND on the IP Phone: • dnd key mode • softkeyN type, topsoftkeyN type, prgkeyN type, or expmodX keyN type • softkeyN states (optional) Parameter – dnd key mode Aastra Web UI: Basic Settings->Preferences->General Configuration Files aastra.cfg, .
5i Series IP Phone Release Notes Features in Release 2.2 Example The following is an example of configuring the mode for DND in the configuration files: dnd key mode: 2 softkey1 type: dnd softkey1 states: idle connected incoming outgoing busy In the above example, softkey 1 is configured for DND for line 1 only, with a “custom” configuration. Pressing softkey 1 displays DND screens for which you can customize on the phone.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring DND Using the Aastra Web UI Use the following procedure to configure DND mode using the Aastra Web UI: Aastra Web UI 1 Click on Basic Settings->Preferences->General.. DND Key Mode Parameter 2 In the “DND Key Mode” field, select a “do not disturb” (DND) mode to use on the phone. Valid values are: Account, Phone, Custom. Default is Phone. • account • phone • custom Sets DND for a specific account.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra Web UI 3 Click to save your changes. The change takes effect immediately without a reboot. 4 Click on Basic Settings->Account Configuration.. 5 For each account, enable DND by placing a check mark in the box. Disable DND by unchecking the box. Notes: 1. If you selected “Account” or “Custom” mode in step 2, you can enable/disable each account or all accounts as applicable.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra Web UI 6 Click to save your changes. The change takes effect immediately without a reboot. 7 Click on Operation->Softkeys and XML; or Click on Operation->Programmable Keys; or Click on Operation->Expansion Module. Softkeys 1 and 2 configured for DND Note: If there is no DND key configured or if it is removed, DND is disabled on the IP Phone. 8 12 Click to save your changes. RN-001029-00, Rev 06, Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 Using DND Modes via the IP Phone UI If you add a DND key using the configuration files or the Aastra Web UI, you can toggle the DND state using the IP Phone UI. Use the following procedure to enable/disable DND on the IP Phone. The following procedure assumes you have already configured a DND key AND assumes there are three accounts configured on the phone. Notes: 1.
IP Phone Release Notes 2.2 Features in Release 2.2 . Aastra IP Phone UI Step Action DND in Account Mode On the 51i and 53i: With the account in focus on the IP Phone UI, press the DND key to toggle DND ON or OFF for the account. Use the RIGHT and LEFT arrow keys to scroll through each account. 1 2 Screenname1 DND On Jan 1 12:96 3 Screenname2 Jan 1 12:96 Screenname3 DND On Jan 1 12:96 In the above example, Screenname1, Screenname2, and Screenname3, are three accounts configured on the phone.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action DND in Phone Mode On the 51i and 53i: Press the DND key to toggle DND ON or OFF for all accounts on the phone. Toggling to ON enables DND on all accounts on the phone. Toggling to OFF disables DND on all accounts on the phone. Use the RIGHT and LEFT arrow keys to scroll through each account.
Aastra IP Phone UI Step Action DND in Custom Mode On the 51i and 53i: Press the DND key on the phone. The screen displays a list of the accounts on the phone and allows you to enable/disable a specific account or all accounts. Use the UP and DOWN arrow keys to scroll through the accounts. DND 1. Screenname1 Change Done Indicates DND On Indicates DND Off DND X 2. Screenname2 Change Done DND 3. Screenname3 Change Done DND 4. All Off Done Set DND 5.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action DND in Custom Mode (continued) On the 55i, 57i, and 57i CT: Press the DND key on the phone. The screen displays a list of the accounts on the phone and allows you to enable/disable a specific account or all accounts. Use the UP and DOWN arrow keys to scroll through the accounts. Services Dir Callers DND 1. Screenname1 2. Screenname2 3.
IP Phone Release Notes 2.2 Features in Release 2.2 CFWD Account-Based Configuration Call Forward (CFWD) on the IP phone allows incoming calls to be forwarded to another destination. Previous to Release 2.2, you could configure CFWD on all lines (global settings) or on specific lines (local settings) on the phone, using the IP Phone UI and the Aastra Web UI. You could configure call forwarding on the IP Phone UI on a global basis only using the Options Menu.
5i Series IP Phone Release Notes Features in Release 2.2 In previous releases, you could configure one phone number and then select the current mode (All, Off, Busy, No Answer, Busy No Answer). In Release 2.2, you can enable different call forwarding rules/modes independently (for example, you can set different phone numbers for Busy, All, and NoAns modes and then turn them on/off individually).
IP Phone Release Notes 2.2 Features in Release 2.2 Important Notes 20 • In the configuration files, the new “call forward key mode” parameter listed in the section “Configuring CFWD Using the Configuration Files”, is in addition to the previous call forward parameter (call forward disabled). You can still use the previous call forwarding parameter if desired in the configuration files. • In the Aastra Web UI, the “Account Configuration” page replaces the previous “Call Forward Settings” page.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring CFWD Using the Configuration Files You use the following parameters to set CFWD on the IP Phone using the configuration files: • • • call forward key mode softkeyN type, topsoftkeyN type, prgkeyN type, or expmodX keyN type softkeyN states (optional) Notes: 1. If there is no CFWD key configured on the phone or it is removed, you can still set the CFWD modes via the IP Phone UI at the path Options->Call Forward. 2.
IP Phone Release Notes 2.2 Features in Release 2.2 Parameter – call forward key mode Aastra Web UI: Basic Settings->Preferences->General Configuration Files aastra.cfg, .cfg Description Sets the mode for how the phone uses “call forwarding” (CFWD) • account The account mode allows you to configure CFWD on a per account basis. Pressing a configured CFWD key applies to the account in focus.
5i Series IP Phone Release Notes Features in Release 2.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring CFWD Using the Aastra Web UI Use the following procedure to configure CFWD mode using the Aastra Web UI: Aastra Web UI 1 Click on Operation->Softkeys and XML; or Click on Operation->Programmable Keys; or Click on Operation->Expansion Module. Softkey 2 configured for CFWD 2 24 Click to save your changes. RN-001029-00, Rev 06, Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra Web UI 3 Click on Basic Settings->Preferences->General.. Call Forward Key Mode Parameter Note: If there is no CFWD key configured on the phone or it is removed, you can still set the CFWD modes via the IP Phone UI at the path Options->Call Forward. RN-001029-00, Rev 06, Release 2.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra Web UI 4 In the “Call Forward Key Mode” field, select a call forward mode to use on the phone. Valid values are: Account, Phone, Custom. Default is Account. • • • account The account mode allows you to configure CFWD on a per account basis. Pressing a configured CFWD key applies to the account in focus. phone The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or No Answer).
5i Series IP Phone Release Notes Features in Release 2.2 Aastra Web UI 6 Click on Basic Settings->Account Configuration.. 7 For each account, enable CFWD state by placing a check mark in one or more of the following “State” fields: • • • All Busy No Answer The “All” option forwards all incoming calls for this account to the specified phone number regardless of the state of the phone. The phone can be in the Busy or No Answer states, or can be in the idle state.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra Web UI 8 For each account, in the “Number” field, enter the phone number for which you want the incoming calls to forward to if the phone is in the specified state. If using the “Account” mode or “Custom” mode, you can enter different phone numbers for each account. Notes: 1. If you selected “Account” mode in step 4, you can enable/disable each account or all accounts as applicable. You can enter different phone number for each enabled state.
5i Series IP Phone Release Notes Features in Release 2.2 Using CFWD Modes via the IP Phone UI If you enable/disable CFWD using the configuration files or the Aastra Web UI, you can use the CFWD screens that display to the IP Phone UI. You can access the CFWD parameters by pressing a configured CFWD key (if previously configured) OR by pressing Options->Call Forward on the phone’s front panel.
IP Phone Release Notes 2.2 Features in Release 2.2 . Aastra IP Phone UI Step Action CFWD in Account Mode (51i and 53i) 1 Use the RIGHT and LEFT arrow keys to scroll through each account. 1 Screenname1 CFWD All Jan 1 12:96 2 3 Screenname2 Jan 1 12:96 Screenname3 CFWD Busy Jan 1 12:96 In the above example, Screenname1, Screenname2, and Screenname3, are three accounts configured on the phone.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 3 Select a state for the account(s) in focus using the UP and DOWN arrow keys. You can enable/disable any or all of the following states for an account: • All - Enables CFWD All for an account and forwards all incoming calls for that account, to the specified number.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 7 In the CFWD State screen, press the DOWN arrow key to scroll to the CFWD Number screen and press CHANGE. 1. Cfwd All Use to view 1. Cfwd State On Done CFWD Number Screen Change 2. Cfwd Number Done Change Change Cfwd Number __ Cancel Set 8 Enter a phone number to apply to the current state in focus.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 10 For the CFWD No Answer state, In the CFWD Number screen, press the DOWN arrow key to scroll to the CFWD No. Rings screen and press CHANGE. 1. Cfwd NoAns Use to view 1. Cfwd State On Done CFWD No. Rings Screen Change 2. Cfwd Number Change Done Change 3. No. Rings Done 11 Change No.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 14 Press # to confirm the change(s) each time the “Apply Changes” screen displays. All changes are saved to the phone. 34 RN-001029-00, Rev 06, Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action CFWD in Phone Mode (51i and 53i) 1 Use the RIGHT and LEFT arrow keys to scroll through each account. 1 Screenname1 CFWD All Jan 1 12:96 2 Screenname2 CFWD All Jan 1 12:96 3 Screenname3 CFWD All Jan 1 12:96 In the above example, Screenname1, Screenname2, and Screenname3, are three accounts configured on the phone. All three accounts have CFWD enabled as indicated by the “CFWD All” message.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 2 Press the Call Forward key. The Call Forward Mode screen displays. Use the UP and DOWN arrow keys to scroll through each state type. Indicates CFWD ALL enabled Indicates no CFWD phone number configured for Busy Indicates CFWD NoAns enabled Cfwd Mode 1. All Done Change Cfwd Mode 2. Busy Done Change Cfwd Mode 3. NoAns Done Change Cfwd Mode 4. All Off Done Set Cfwd Mode 5.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 3 Select a state using the UP and DOWN arrow keys. You can enable/disable a specific account on the phone with any or all of the following states. However, the configuration you set will apply to all accounts on the phone. • All - Enables CFWD All on the phone and forwards all incoming calls to the specified number.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 5 Press the CHANGE key in the CFWD State screen. Press NEXT to toggle the state of the CFWD state ON or OFF. In the example in Step 4, you press NEXT to change the option to OFF. 6 Press the SET key to save the change. 7 In the CFWD State screen, press the DOWN arrow key to scroll to the CFWD Number screen and press CHANGE. 1. Cfwd All Use to view 1. Cfwd State On Done CFWD Number Screen Change 2.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 10 For the CFWD No Answer state, in the CFWD Number screen, press the DOWN arrow key to scroll to the CFWD No. Rings screen and press CHANGE. 1. Cfwd NoAns Use to view 1. Cfwd State On Done CFWD No. Rings Screen Change 2. Cfwd Number Change Done Change 3. No. Rings Done 11 Change No.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 14 Press # to confirm the change(s) each time the “Apply Changes” screen displays. All the same changes are saved to all accounts on the phone. 40 RN-001029-00, Rev 06, Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action CFWD in Custom Mode (51i and 53i) 1 Use the RIGHT and LEFT arrow keys to scroll through each account. 1 Screenname1 CFWD All Jan 1 12:96 2 3 Screenname2 CFWD Busy Jan 1 12:96 Screenname3 CFWD NoAns Jan 1 12:96 In the above example, Screenname1, Screenname2, and Screenname3, are three accounts configured on the phone.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 2 Select an account to configure. Press the CHANGE key. The CFWD Mode screen displays. Use the UP and DOWN arrow keys to scroll through each state screen.. Indicates CFWD All enabled Indicates no CFWD phone number configured for Busy Indicates CFWD NoAns enabled Cfwd Mode 1. All Done Change Cfwd Mode 2. Busy Done Change Cfwd Mode 3. NoAns Done Change Cfwd Mode 4. All Off Done Set Cfwd Mode 5.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 3 Select a state for the account(s) in focus using the UP and DOWN arrow keys. You can enable/disable any or all of the following states for a specific account or for all accounts (with individual configurations): • All - Enables CFWD All for an account and forwards all incoming calls for that account, to the specified number. The phone number can be different between accounts.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 5 Press the CHANGE key in the CFWD State screen. Press NEXT to toggle the state of the CFWD state ON or OFF. In the example in Step 4, you press NEXT to change the option to OFF. 6 Press the SET key to save the change. 7 In the CFWD State screen, press the DOWN arrow key to scroll to the CFWD Number screen and press CHANGE. 1. Cfwd All Use to view 1. Cfwd State On Done CFWD Number Screen Change 2.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 10 For the CFWD No Answer state, in the CFWD Number screen, press the DOWN arrow key to scroll to the CFWD No. Rings screen and press CHANGE. 1. Cfwd NoAns Use to view 1. Cfwd State On Done CFWD No. Rings Screen Change 2. Cfwd Number Done Change Change 3. No. Rings Done 11 Change No.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 13 Press DONE to save CFWD All Number, CFWD All State, CFWD Busy Number, CFWD Busy State, CFWD No Answer Number, CFWD No Answer State, CFWD No Answer Rings. Each time you press DONE, the following “Apply Changes” screen displays. Apply Changes? 0 Cancel # Confirm 14 Press # to confirm the change(s) each time the “Apply Changes” screen displays. All changes are saved to the phone for all accounts.
5i Series IP Phone Release Notes Features in Release 2.2 . Aastra IP Phone UI Step Action CFWD in Account Mode (55i, 57i, and 57i CT) 1 Use the RIGHT and LEFT arrow keys to scroll through each account.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 3 Select a state for the account(s) in focus using the UP and DOWN arrow keys. You can enable/disable any or all of the following states for an account: • All - Enables CFWD All for an account and forwards all incoming calls for that account, to the specified number.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 4 For the CFWD No Answer state, press the CHANGE key for the mode you selected in step 2. This displays the Call Forward State screen. In the following example, the CFWD All state is ON.. Services Dir Callers Call Forward Mode NoAns State: On Number: 5551212 No. Rings: 1 - Change Cancel - AllAccts Done - Call Forward State Screen Services Dir Callers Change Call Forward Mode NoAns State: Off Number: 5551212 No.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 5 Press the CHANGE key in the CFWD State screen. With the cursor in the “State” field, toggle the state ON and OFF by pressing the CHANGE key. Note: You can press the AllAccts key to copy the settings in the current Call Forward Settings screen for a specific call forward mode, to every account on the phone. Every account will have the same settings for that call forward mode.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action CFWD in Phone Mode (55i, 57i, and 57i CT) 1 Use the RIGHT and LEFT arrow keys to scroll through each account.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 3 Select a state for the phone using the UP and DOWN arrow keys. You can enable/disable a specific account on the phone with any or all of the following states. However, the configuration you set will apply to all accounts on the phone. • All - Enables CFWD All on the phone and forwards all incoming calls to the specified number.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 4 In the CFWD No Answer state, press the CHANGE key for the mode you selected in step 2. This displays the Call Forward State screen. In the following example, the CFWD All state is ON.. Services Dir Callers Call Forward Mode NoAns State: On Number: 5551212 No. Rings: 1 - Change Cancel Done - Call Forward State Screen Change Services Dir Callers Call Forward Mode NoAns State: Off Number: 5551212 No.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 6 Use the DOWN arrow key to scroll to the “Number” field. Enter a phone number to apply to the current state in focus. When the phone is in the state you specified, and a call comes into the phone, it forwards the call to the number you specify. Use the BACKSPACE key if required to delete characters. 7 Use the DOWN arrow key to scroll to the “No. Rings” field.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action CFWD in Custom Mode (55i, 57i, and 57i CT 1 Use the RIGHT and LEFT arrow keys to scroll through each account.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 3 Select an account using the UP and DOWN arrow keys. You can also use the following keys if required: All Off Key- Disables CFWD for all accounts on the phone. All On Key - Enables CFWD for all accounts on the phone. CopytoAll Key - Copies all settings for the acccount you select, to all other accounts on the Call Forward Account screen.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 5 Select a state for the selected account(s) using the UP and DOWN arrow keys. You can enable/disable any or all of the following states for a specific account or for all accounts (with individual configurations): • All - Enables CFWD All for an account and forwards all incoming calls for that account, to the specified number. The phone number can be different between accounts.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 6 Press the CHANGE key for the mode you selected in step 4. This displays the Call Forward State screen. In the following example, the CFWD All state is ON.. Services Dir Callers Call Forward Mode NoAns State: On Number: 5551212 No. Rings: 1 - Change Cancel - AllAccts Done - Call Forward State Screen Services Dir Callers Change Call Forward Mode NoAns State: Off Number: 5551212 No.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 7 Press the CHANGE key in the CFWD State screen. With the cursor in the “State” field, toggle the state ON and OFF by pressing the CHANGE key. Note: You can press the AllAccts key to copy the settings in the current Call Forward Settings screen for a specific call forward mode, to every account on the phone. Every account will have the same settings for that call forward mode.
IP Phone Release Notes 2.2 Features in Release 2.2 Multicast Group Paging An Administrator or User can configure a specific softkey on the phone that allows you to send/receive a Real Time Transport Protocol (RTP) stream to/from pre-configured multicast address(es) without involving SIP signaling. This is called Group Paging on the IP phones. You can specify up to 5 listening multicast addresses.
5i Series IP Phone Release Notes Features in Release 2.2 The recipient can drop the incoming page if required. The recipient can also set Do Not Disturb (DND) to ignore any incoming pages. Note: For outgoing RTP multicasts, all other existing calls on the phone are put on hold. For incoming RTP multicasts, the ringing display is dependant on the “Allow Barge-In” parameter.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring Group Paging RTP Settings Receiving End of Page Using the Configuration Files Use the following parameters to configure RTP streaming on the receiving end for Paging applications using the configuration files. • paging group listening. Parameter – paging group listening Aastra Web UI: Basic Settings->Preferences-> Group Paging RTP Settings Configuration Files aastra.cfg, .
5i Series IP Phone Release Notes Features in Release 2.2 Receiving End of Page Using the Aastra Web UI Use the following procedure to configure RTP streaming on the receiving end for Paging applications using the Aastra Web UI. Aastra Web UI 1 Click on Basic Settings->Preferences->Group Paging RTP Settings. 2 In the “Paging Listen Addresses” text box, enter the multicast IP address(es) and port number on which the phone listens for incoming multicast RTP packets.
IP Phone Release Notes 2.2 Features in Release 2.2 Sending End of Page Using the Configuration Files Use the following parameters to configure RTP streaming on the sending end for Paging applications using the configuration files. • softkeyN type, topsoftkeyN type, prgkeyN type, or expmodX keyN type • sofkeyN label, topsoftkeyN label, or expmodX keyN label • softkeyN value, topsoftkeyN value, prgkeyN value, or expmodX keyN value.
5i Series IP Phone Release Notes Features in Release 2.2 Sending End of Page Using the Aastra Web UI Use the following procedure to configure RTP streaming for Paging applications using the Aastra Web UI. Aastra Web UI 1 Click on Softkeys and XML. or Click on Programmable Keys. or Click on Expansion Module Keys. 2 Choose a key that you want to assign as the Paging Key and select Paging from the “Type” field.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra Web UI 4 In the “Value” field, enter a multicast IP address and a port number for the Paging key. When you press this key, the phone initiates an outgoing multicast RTP session to the specified address(es) using the specified port. (For example, 239.0.1.15:10000). Notes: 1. When you select Paging for the “Type” field, the “Line” field and state fields are disabled. 2. The “Value” field allows for one multicast address entry only.
5i Series IP Phone Release Notes Features in Release 2.2 Using the Configured Paging Key on the IP Phone The following procedure describes the use of the Paging key. The procedures assumes you have already configured the Paging key using the configuration files or the Aastra Web UI. Notes: 1. Recipient of a Paging call can set a global “Do Not Disturb” (DND) to ignore any incoming pages. 2. For incoming Paging, the phones use the Intercom configuration settings.
IP Phone Release Notes 2.2 Features in Release 2.2 Simplified Transfer Using BLF and Speeddial Keys In Release 2.2, a transfer (Xfer) enhancement has been added to the original functionality of the BLF and Speeddial keys - BLF/Xfer and Speeddial/Xfer. Prior to this release, the IP Phones supported BLF, Xfer, and Speeddial softkeys and programmable keys.
5i Series IP Phone Release Notes Features in Release 2.2 BLF/Xfer Key Requirements and Functionality • BLF/Xfer and BLF A BLF/Xfer key can be configured for subscribing to an extension and monitor the status of the extension, similar to the the BLF key functionality. Changes of the state of the monitored extension are indicated by a LED / Icon.
IP Phone Release Notes 2.2 Features in Release 2.2 Speeddial/Xfer Key Requirements and Functionality The Speeddial/Xfer key has the following capabilities: • Speeddial/Xfer and Speeddial When the phone is in the “Idle” state, pressing the Speeddial/Xfer key causes the phone to go offhook and dial the predefined extension. • Speeddial/Xfer and Blind Transfer When the phone is connected to a call, pressing the Speeddial/Xfer key blind transfers the call to the predefined target.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring the BLF/Xfer Key and the Speeddial/Xfer Key Using the Configuration Files You use the following parameters in the configuration files to configure the BLF/Xfer key and/or Speeddial/Xfer key on the IP Phone.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring the BLF/Xfer Key and the Speeddial/Xfer Key Using the Aastra Web UI You configure the BLF/Xfer key and/or the Speeddial/Xfer Key on the IP phone similar to configuring a BLF key or speeddial key using the Aastra Web UI. Use the following procedure to configure BLF/Xfer and/or Speeddial/Xfer.. Aastra Web UI 1 Click on Operation->Softkeys and XML. or Click on Operation->Programmable Keys. or Click on Operation->Expansion Keys.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra Web UI Top Keys Tab (57i example) 2 Choose a key that you want to assign the BLF/Xfer key or a Speeddial/Xfer key to, and select BLF/ Xfer or Speeddial/Xfer from the “Type” field.. 3 In the “Label” field, enter a key label to assign to the BLF/Xfer key (for example, “BX35”). 4 In the “Value” field, enter the monitored extension (for example, “35”). 5 In the “Line” field, select the line for which you want to use the key functionality.
IP Phone Release Notes 2.2 Features in Release 2.2 Ability to Disable Switching Focus to a Ringing Line When on a Call In Release 2.2, it is now possible to control the behavior of the phone when it receives an incoming call when it is already in a connected call. By default, and in the previous release behavior, the phone switches focus to the ringing line to enable the user to see who is calling them. In Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring “Switch Focus to Ringing Line” Using the Aastra Web UI Use the following procedure to enable or disable the “Switch Focus to Ringing Line” using the Aastra Web UI. Aastra Web UI 1 Click on Basic Settings->Preferences->General. . “Switch Focus to Ringing Line” Parameter 2 The “Switch Focus to Ringing Line” field is enabled by default. To disable this field, uncheck the box. 3 Click to save your changes.
IP Phone Release Notes 2.2 Features in Release 2.2 Security Features 802.1x Support The IP phones now support the IEEE 802.1x protocol. The 802.1x protocol is a standard for passing Extensible Authentication Protocol (EAP) over a wired or wireless Local Area Network (LAN). The 802.1x protocol on the IP phone facilitates media-level access control, and offers the capability to permit or deny network connectivity, control LAN access, and apply traffic policy, based on user or endpoint identity.
5i Series IP Phone Release Notes Features in Release 2.2 Certificates and Private Key Information • If the certificates and private key are NOT stored in the phone: — the phone connects to an open unauthenticated VLAN and the certificates are downloaded. or — the phone connects using EAP-MD5 to a restricted VLAN and the certificates are downloaded. • If the certificates and private key ARE stored in the phone, the phone uses them during the authentication process.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring the 802.1x Protocol Using the Configuration Files Use the following parameters to configure the 802.1x Protocol on your phone using the configuration files. For EAP-MD5 use: • eap type • identity • md5 password • pc port passthrough enabled For EAP-TLS use: 78 • eap type • identity • 802.1x root and intermediate certificates (use 1 root and 0 or 1 intermediate certificates) • 802.
5i Series IP Phone Release Notes Features in Release 2.2 Parameter – pc port passthru enabled IP phone UI Aastra Web UI Configuration Files Options->Administrator Menu-> Network Settings->Ethernet Link Advanced Settings->Network-> Basic Network Settings aastra.cfg, .cfg Description Enables or disables the LAN PC port on the phone.
IP Phone Release Notes 2.2 Features in Release 2.2 Parameter – identity IP Phone UI: Options->Administrator Menu-> Network Settings->Ethernet Link-> 802.1x Settings->EAP-MD5 Settings Aastra Web UI: Advanced Settings->802.1x Support->General Configuration Files aastra.cfg, .cfg Description Specifies the identity or username used for authenticating the phone. Note: The value you enter for this parameter also displays in the Aastra Web UI at the path Advanced Settings-> 802.
5i Series IP Phone Release Notes Features in Release 2.2 Parameter – 802.1x root and intermediate certificates Aastra Web UI: Advanced Settings->802.1x Support-> EAP-TLS Settings Configuration Files aastra.cfg, .cfg Description Specifies the file name that contains the root and intermediate certificates related to the local certificate. Format String Default Value N/A Range N/A Example 802.1x root and intermediate certificates: filename.pem Parameter – 802.
IP Phone Release Notes 2.2 Features in Release 2.2 Parameter – 802.1x trusted certificates Aastra Web UI: Description Specifies the file name that contains the trusted certificates. Format String Default Value N/A Range N/A Example 802.1x trusted certificates: filename.pem 82 Advanced Settings->802.1x Support-> EAP-TLS Settings Configuration Files aastra.cfg, .cfg RN-001029-00, Rev 06, Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring the 802.1x Protocol Using the IP Phone UI Use the following procedure to configure the 802.1x Protocol on your phone using the IP Phone UI. Note: If configuring 802.1x using the IP Phone UI, the certificates and private keys must already be configured and stored on the phone. Use the configuration files or the Aastra Web UI to load certificates and private keys.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 4 The PC PassThru Port is enabled by default. Enable PassThru Port Enable PassThru Port Yes - Change Cancel Done Note: The PC PassThru Port must be enabled to use the 802.1x Protocol. 5 Press Done. 6 Select 802.1x Settings. 7 Select 802.1x Mode. 802.1x Settings 1. 802.1x Mode 2. EAP-MD5 Settings - Select Done - 84 RN-001029-00, Rev 06, Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 8 Select EAP-MD5 to configure the phone to use MD5 authentication; or Select EAP-TLS to configure the phone to use TLS authentication. 802.1x Mode Disabled EAP-MD5 EAP-TLS Cancel Done Note: The 802.1x Protocol is disabled by default. If you select EAP-TLS authentication, you must use the configuration files or the Aastra Web UI to configure the certificates and private key for the phone. 9 Press Done.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 12 Enter the identity or username used for authenticating the phone. Username Username: | - Backspace Nextspace Cancel - ABC Done - 13 Use the softkeys as applicable while entering the username; then press Done. 14 Enter the password used for authenticating the phone. Password Password: | - Backspace Nextspace Cancel - ABC Done - 15 Use the softkeys as applicable while entering the password; then press Done.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring the 802.1x Protocol Using the Aastra Web UI Use the following procedure to configure the 802.1x Protocol on your phone using the Aastra Web UI. Aastra Web UI Click on Advanced Settings->802.1x Support. To configure EAP-MD5: 17 In the “EAP Type” field, select EAP-MD5. Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS. 18 In the “Identify” field, enter an Identity for the IP phone for which you are configuring 802.1x.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra Web UI 21 Click on Advanced Settings->Network->Basic Network Settings. PC Port PassThru Enable/Disable 22 The “PC Port PassThru Enable/Disable” field is enabled by default. To disable this field, uncheck the box. Note: The PC Port PassThru Enable Disable field must be enabled to use the 802.1x Protocol. 23 Click to save your changes. To configure EAP-TLS: 1 In the “EAP Type” field, select EAP-TLS.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra Web UI 5 In the “Private Key” field, enter the filename that contains the private key. For example: privatekey.pem. 6 In the “Trusted Certificates” field, enter the filename that contains the trusted certificates. For example: trusted_certificates.pem. 7 Click 8 Click on Advanced Settings->Network->Basic Network Settings. to save your changes.
IP Phone Release Notes 2.2 Features in Release 2.2 Improved Configuration File Encryption The IP phones have an encryption feature that allows Service Providers the capability of storing encrypted files on their server to protect against unauthorized access and tampering of sensitive information (i.e., user accounts, login passwords, registration information). Service Providers also have the capability of locking a phone to use a specific server-provided configuration only.
5i Series IP Phone Release Notes Features in Release 2.2 XML Features SIP NOTIFY Triggers an XML Event In order for an XML push to bypass the NAT/firewall, in Release 2.2 the phone now supports a proprietary SIP NOTIFY event (aastra-xml) with or without XML content. If XML content is provided in the SIP NOTIFY, it is processed directly by the phone as it is done for an XML PUSH.
IP Phone Release Notes 2.2 Features in Release 2.2 Example of a SIP NOTIFY without XML Content NOTIFY sip:200@10.30.100.103:5060 SIP/2.0 Via: SIP/2.0/UDP 10.30.100.103:5060;branch=z9hG4bK7bbc1fac;rport From: ;tag=81be2861f3 To: Jacky200 Contact:
5i Series IP Phone Release Notes Features in Release 2.2 Configuring XML SIP NOTIFY Feature Using the Configuration Files You can enable or disable the XML SIP NOTIFY feature using the following parameter in the configuration file: • sip xml notify event Parameter – sip xml notify event Aastra Web UI: Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Files aastra.cfg, .cfg Description Enables or disables the phone to accept or reject an aastra-xml SIP NOTIFY message.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring XML SIP NOTIFY Feature Using the Aastra Web UI Use the following procedure to enable/disable the XML SIP NOTIFY feature in the Aastra Web UI. Aastra Web UI Enabling/Disabling the XML SIP NOTIFY Feature 1 Click on Advanced Settings->Global SIP->Advanced SIP Settings. XML SIP Notify Parameter 94 Enabling Whitelist Proxy is recommended RN-001029-00, Rev 06, Release 2.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra Web UI 2 The “XML SIP Notify" field is disabled by default. To enable this field, check the box. This field enables or disables the phone to accept or reject an aastra-xml SIP NOTIFY message. Note: To ensure the SIP NOTIFY is coming from a trusted source, it is recommended that you enable the Whitelist feature (Whitelist Proxy parameter) on the IP phone.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring the Action URI for an empty XML SIP NOTIFY using the Aastra Web UI Use the following procedure to configure the Action URI for an empty XML SIP NOTIFY using the Aastra Web UI. Aastra Web UI Setting an Action URI XML SIP Notify 1 If the content is missing in the SIP NOTIFY message received by the phone, the phone automatically uses the value you specify for the Action URI XML SIP Notify parameter at the path Advanced Settings->Action URI.
5i Series IP Phone Release Notes Features in Release 2.2 RTP and Multicast RTP via XML The IP Phones have new XML commands an Administrator can use with the “AastraIPPhoneExecute” object. These commands allow the phone to send/ recieve an RTP stream to/from given multicast/unicast addresses (without involving SIP signaling).
IP Phone Release Notes 2.2 Features in Release 2.2 RTPRx The RTPRx URI instructs the phone to receive a Unicast RTP stream or stop receiving Unicast or Multicast RTP streams. The RTPRx formats to use with the AastraIPPhoneExecute object in the URI are: • RTPRx:i:p:v • RTPRx:Stop Where i Specifies the IP Address from which the stream is coming. p Specifies the UDP port on which to receive the RTP stream. Ensure that this is a number greater than 3100.
5i Series IP Phone Release Notes Features in Release 2.2 Note: Once the RTPRx command in the URI is sent to the phone, it stops the phone from listening to any previous RTPRx or RTPMRx commands. The phone starts listening based on the most recent RTPRx command received. This behavior also applies to the RTPRx:Stop and RTPMRx:Stop commands as well but does not enable any further listening.
IP Phone Release Notes 2.2 Features in Release 2.2 RTPMRx The RTPMRx URI instructs the phone to receive a Multicast RTP stream. The RTPMRx format to use with the AastraIPPhoneExecute object in the URI is: • RTPMRx:i:p:v Where i Specifies the multicast IP Address from which to receive an RTP stream. p Specifies the UDP port on which to receive the RTP stream. Ensure that this is a number greater than 3100.
5i Series IP Phone Release Notes Features in Release 2.2 RTPMTx The RTPMTx URI instructs the phone to transmit a Multicast RTP stream. The RTPMTx format to use with the AastraIPPhoneExecute object in the URI is: • RTPMTx:i:p Where i Specifies the Multicast IP Address to which an RTP stream is transmitted. p Specifies the UDP port on which to transmit the RTP stream. Ensure that this is a number greater than 3100. Example: This example sends a multicast RTP stream to 239.0.1.20 from UDP port 21000.
IP Phone Release Notes 2.2 Features in Release 2.2 Text Wrap for XML TextMenu Items The AastraIPPhoneTextMenu object now supports text wrapping on two lines for its items. This is done using a new attribute called "wrapList". This attribute allows you to specify the text wrapping to an additional line rather than truncating and dropping the text.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring the Text Wrapping Parameter You use the following parameter with the XML AastraIPPhoneTextMenu object: • wrapList Example Non-Blocking HTTP Connections In Release 2.2, the IP Phones support a non-blocking HTTP connection feature.
IP Phone Release Notes 2.2 Features in Release 2.2 Polling Action URI Another way to reach a phone behind a NAT/firewall is to have the phone make an XML call at periodic intervals. A new Action URI was added in Release 2.2 called action uri poll which commands the phone to perform an XML call at configurable intervals. An Administrator can specify the URI to be called and specify the interval between polls using the configuration files or the Aastra Web UI.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring Polling Action URI via the Aastra Web UI Use the following procedure to configure polling Action URI using the Aastra Web UI. Aastra Web UI 1 Click on Advanced Settings->Action URI. 2 In the “Poll” field, enter a URI to be called every "action uri pool interval" seconds. Enter the value in a URI format. For example, http://myserver.com/myappli.xml.
IP Phone Release Notes 2.2 Features in Release 2.2 Deployability Features SIP Registration Status in Aastra Web UI The IP Phones now show the SIP registration status on the IP Phone’s Network Status screen in the Aastra Web UI. If there are accounts configured on the IP Phone, their SIP status displays in the Network Status window. The 51i displays only one status line. All other model phones display the status of up to 9 lines.
5i Series IP Phone Release Notes Features in Release 2.2 Status Condition Desription Registered Displays this status on accounts that HAVE been registered with the SIP proxy server. Example: Backup Registrar Line SIP Account Status Used? 1 9057604603@anasipproxy.aastra.com:5060Registered Yes where Account Number is “1” SIP Account is “9057604603@anasipproxy.aastra.
IP Phone Release Notes 2.2 Features in Release 2.2 Support for HTTP and HTTPS Configuration Servers on Non-Standard Ports Prior to Release 2.2, the IP Phones used the default port numbers for loading configuration over HTTP (Port 80), HTTPS (Port 443) and DHCP option 66.
5i Series IP Phone Release Notes Features in Release 2.2 Parameter – https port IP Phone UI: Options->Administrator Menu-> Configuration Server->HTTPS Settings-> HTTPS Client->Download Port Aastra Web UI: Advanced Settings->Configuration Server-> Settings Configuration Files aastra.cfg, .cfg Description Specifies the HTTPS port that the server uses to load the configuration to the phone over HTTPS.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 4 Enter the HTTP port that the server uses to load the configuration to the phone over HTTP. HTTP Port HTTP Port 80 - Backspace Cancel Done - Press Done. 5 Press Options to save your changes and exit from the Options Menu. Configuring HTTPS Port 1 Press Options->Administrator Menu. 2 Enter your Administrator password and press Enter. 3 Select Configuration Server->HTTPS Settings->HTTPS Client->Download Port.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring HTTP and HTTPS Port Using the Aastra Web UI Use the following procedure to configure the HTTP or HTTPS port using the Aastra Web UI.. Aastra Web UI Configuring HTTP Port 1 Click on Advanced Settings->Configuration Server->Settings. 2 In the “Download Procotol” field, select HTTP. 3 In the “HTTP Server” field, enter the HTTP server that downloads the configuration to the phone. Enter the value in the format 0.0.0.0. For example, 10.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra Web UI Configuring HTTPS Port 1 Click on Advanced Settings->Configuration Server->Settings. 2 In the “Download Procotol” field, select HTTPS. 3 In the “HTTPS Server” field, enter the HTTPS server that downloads the configuration to the phone. Enter the value in the format 0.0.0.0. For example, 10.40.50.90. 4 In the “HTTPS Path” field, enter the HTTPS path of the HTTPS server.
5i Series IP Phone Release Notes Features in Release 2.2 Ability to Set TFTP and FTP Path for Configuration Servers The IP Phones now allow the acquisition of configuration files from subdirectories when connecting to either a TFTP or FTP server. An Administrator can specify a TFTP path, an alternate TFTP path, or an FTP path for where the configuration files reside on the TFTP or FTP server. An Administrator can configure this path using the configuration files, the IP Phone UI, or the Aastra Web UI.
IP Phone Release Notes 2.2 Features in Release 2.2 Parameter – alternate tftp path Aastra Web UI Advanced Settings-> Configuration Server->Settings IP Phone UI Options->Administrator Menu-> Configuration Server->TFTP Settings Configuration Files aastra.cfg, .cfg Description Specifies a path name for which the configuration files reside on an alternate TFTP server for downloading to the IP Phone. Note: Enter the path name in the form folderX\folderX\folderX. For example, ipphone\57i\configfiles.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring a TFTP or FTP Path Using the Aastra Web UI Use the following procedure to configure a TFTP path or FTP path on the IP Phones.. Aastra Web UI Configuring TFTP and Alternate TFTP Path 1 Click on Advanced Settings->Configuration Server->Settings. TFTP Path Alternate TFTP Path 2 In the “TFTP Path” field enter the path name for which the configuration files reside on the TFTP server for downloading to the IP Phone.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra Web UI Configuring FTP Path 1 Click on Advanced Settings->Configuration Server->Settings. FTP Path 2 In the “FTP Path” field, enter the path name for which the configuration files reside on the FTP server for downloading to the IP Phone. Note: Enter the path name in the form folderX\folderX\folderX. For example, ipphone\57i\configfiles. You can enter up to 64 alphanumeric characters. 3 116 Click to save your changes.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring a TFTP or FTP Path Using the IP Phone UI Use the following procedure to configure a TFTP or FTP path using the IP Phone UI. Aastra IP Phone UI Step Action Configuring TFTP Path 1 Press Options->Administrator Menu. 2 Enter your Administrator password and press Enter. 3 Select Configuration Server->TFTP Settings->Primary TFTP Path.
IP Phone Release Notes 2.2 Features in Release 2.2 Aastra IP Phone UI Step Action 5 Press DONE to save the entry for the TFTP Path to the phone’s configuration. Configuring Alternate TFTP Path 1 Press Options->Administrator Menu. 2 Enter your Administrator password and press Enter. 3 Select Configuration Server->TFTP Settings->Alternate TFTP Path. 4 Enter the enter the path name for which the configuration files reside on the alternate TFTP server for downloading to the IP Phone.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra IP Phone UI Step Action 5 Press DONE to save the entry for the Alternate TFTP Path to the phone’s configuration. Configuring FTP Path 1 Press Options->Administrator Menu. 2 Enter your Administrator password and press Enter. 3 Select Configuration Server->FTP Settings->FTP Path. 4 Enter the enter the path name for which the configuration files reside on the FTP server for downloading to the IP Phone. For example, config\ftp.
IP Phone Release Notes 2.2 Features in Release 2.2 NAT Traversal Features Configurable SIP and TLS Source Ports A System Administrator can now configure the SIP and TLS source ports on the IP Phone. Previously, the IP phone used default values (5060 for UDP/TCP and 5061 for TLS). The two new parameters for configuring the SIP and TLS source ports are: • sip local port • sip local tls port You can configure the SIP and TLS source ports using the configuration files or the Aastra Web UI.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring SIP and TLS Source Ports Using the Configuration Files Parameter – sip local port Aastra Web UI: Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Files aastra.cfg, .cfg Description Specifies the local source port (UDP/TCP) from which the the phone sends SIP messages Format Numeric Default Value 5060 Range Greater than 1024 and less than 65535 Notes: 1.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring SIP and TLS Source Ports Using the Aastra Web UI Use the following procedure to configure SIP and TLS source ports using the Aastra Web UI.. Aastra Web UI 1 Click on Advanced Settings->Global SIP->Advanced SIP Settings. . “Local SIP UDP/TCP Port” Parameter 2 “Local SIP TLS Port” Parameter The “Local SIP UDP/TCP Port” field has a default value of 5060. Change this value if required to a value greater than 1024 and less than 65535.
5i Series IP Phone Release Notes Features in Release 2.2 Aastra Web UI 3 The “Local SIP TLS Port” field has a default value of 5061. Change this value if required to a value greater than 1024 and less than 65535. Note: It is recommended that you avoid the conflict with any TCP ports being used. For example: WebUI HTTP server on 80/tcp and HTTPS on 443/tcp. 4 Click to save your changes. RPORT Support The Session Initiation Protocol (SIP) operates over UDP and TCP.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring Rport Using the Configuration Files Use the following parameter to configure Rport on your phone. • sip rport Parameter – sip rport Aastra Web UI: Advanced Settings->Network-> Advanced Network Settings Configuration Files aastra.cfg, .cfg Description Allows you to enable (1) or disable (0) the use of Rport on the IP phone.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring Rport Using the Aastra Web UI Use the following procedure to configure Rport on your phone using the Aastra Web UI. Aastra Web UI 1 Click on Advanced Settings->Network->Advanced Network Settings. Rport Parameter 2 In the "Advanced Network Settings" section, enable the "Rport (RFC3581" field by checking the check box. (Disable Rport by unchecking the box).
IP Phone Release Notes 2.2 Features in Release 2.2 BroadSoft Interoperability Features CMS Support The IP phones now support HTTP/HTTPS digest authentication as defined in RFC 2617. (The HTTP client supports digest authentication; the HTTP server does not; the HTTP server supports basic authentication). This feature allows the phones to interoperate with Broadsoft’s CMS phone configuration tool.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring HTTP/HTTPS Digest Authentication Using the Configuration Files Use the following parameters to configure HTTP/HTTPS Digest Authentication on the phone. Parameter – http digest username Configuration Files aastra.cfg, .cfg Description Specifies the username to use for HTTP/HTTPS digest authentication.. The server uses this username for authentication purposes when loading configuration to the phone over HTTP/HTTPS.
IP Phone Release Notes 2.2 Features in Release 2.2 Parameter – http digest force login Configuration Files aastra.cfg, .cfg Description Enables and disables the display of a LOGIN key on the phone’s idle screen. Note: After the server has authenticated the phone, this parameter must be set to “0” in order for the server to send the default profile to the phone.
5i Series IP Phone Release Notes Features in Release 2.2 4. Press the “Log In" key to displays the username/password screen. Note: On the 55i, 57i, and 57i CT, you use the Log In softkey to log in. On the 51i, and 53i, you press the right arrow key to log in. 51i and 53i Login Screens Please Enter: Username: Next 471348471 Tues Jan1 10:00am Log In Submit 55i, 57i, and 57i CT Login Screens L1 471348471 Tues Jan1 10:00am Log In - 5. Please Enter: Username: Password: - Backspace Cancel - - abc.
IP Phone Release Notes 2.2 Features in Release 2.2 Server-Side Do Not Disturb (DND), Call Forward (CFWD) , and Automatic Call Distribution (ACD) Support The IP phones now support server-side DND, CFWD, and ACD feature events.This feature is called “as-feature-event” and works with the DND, CFWD, and ACD keys. Notes: 1. The 51i supports server-side DND and CFWD only. 2. The DND, CFWD, and ACD server-side feature is not applicable to the CT handset.
5i Series IP Phone Release Notes Features in Release 2.2 When you press the DND, CFWD, or ACD key, only one attempt is made to enable/disable the “as-feature-event” feature on the server. The message “Trying” displays on the phone’s LCD after pressing the key. If the attempt is successful, the idle screen displays. If the attempt is unsuccessful, the message “Failed” displays. The user can press the softkey again to re-attempt the feature if required.
IP Phone Release Notes 2.2 Features in Release 2.2 Note: IMPORTANT! If DND and CFWD are configured to use “Account” mode on the IP Phone, pressing the DND and CFWD keys apply to the account in focus as described in the section, “Account-Based Do Not Disturb (DND) and Call Forward (CFWD)”. If ACD is configured on the phone, the ACD softkey applies to the line for which the key is configured. The ACD softkey must be configured for the first line of an account.
5i Series IP Phone Release Notes Features in Release 2.2 Configuring Server-Side DND, CFWD, and ACD Using the Configuration Files If the phone-side features of the DND, CFWD, and ACD keys are enabled, the phone uses the existing parameter values for these keys. If the server-side features are enabled, the phone saves the state of the features from the server on the phone.
IP Phone Release Notes 2.2 Features in Release 2.2 Configuring Server-Side DND, CFWD, and ACD Using the Aastra Web UI Use the following procedure to enable/disable the server-side “as-feature-event” on the IP Phone using the Aastra Web UI.. Aastra Web UI 1 Click on Advanced Settings->LineN->Advanced SIP Settings. 2 In the “Advanced SIP Settings” section, enable the "As--Feature-Event Subscription" field, by checking the check box. (Disable this field by unchecking the box).
5i Series IP Phone Release Notes Features in Release 2.2 Aastra Web UI 4 Click on Advanced Settings->Global SIP->Advanced SIP Settings. As-Feature-Event Subscription Period 5 In the “Advanced SIP Settings” section, in the “As-Feature-Event Subscription Period” field, enter the amount of time, in seconds, that the phone waits after sending a SUBSCRIBE, to recieve a NOTIFY response from the server side. Default is 3600. Valid values are 6 Click to save your changes. RN-001029-00, Rev 06, Release 2.
IP Phone Release Notes 2.2 Issues Resolved on Series 5i Phones in Release 2.2 Issues Resolved on Series 5i Phones in Release 2.2 This section describes the issues resolved on the Series 5i IP phones in Release 2.2. The following table provides the issue number and a brief description of each fix. Note: Unless specifically indicated, these resolved issues apply to all phone models. Issue Number Description of Fix User Interface DEF07409 Phones no longer display "Unknown Name" when making outbound calls.
5i Series IP Phone Release Notes Issues Resolved on Series 5i Phones in Release 2.2 Issue Number Description of Fix DEF08852 Auto-answer calls are no longer rejected when you are already in a call; they are now treated as normal calls. The previous behavior affected Fonality HUD users.
IP Phone Release Notes 2.2 Issues Resolved on Series 5i Phones in Release 2.2 Issue Number Description of Fix Robustness DEF07948 Phones now work properly when they fail to renew a registration, either because of network issues or because of SIP message floods. DEF08186 Phones now corrently clear down the call when making a call to a paging group and when the phones monitor all the group members via BLF. DEF08330 Phones no longer have a resource leak when they are flooded by SIP retransmissions.
5i Series IP Phone Release Notes Contacting Aastra Telecom Support Contacting Aastra Telecom Support If you’ve read this release note, and consulted the Troubleshooting section of your phone model’s manual and still have problems, please send inquiries via email to support@aastra.com. RN-001029-00, Rev 06, Release 2.
Generic SIP IP Phone Model 5i Series 2.2 Release Notes Copyright © 2008 Aastra Telecom. All rights reserved. Information in this document is subject to change without notice. Aastra Telecom assumes no responsibility for any errors that may appear in this document. Product capabilities described in this document pertain solely to Aastra Telecom's marketing activities in the U.S. and Canada. Availability in other markets may vary. RN-001029-00 Rev 06 SIP IP Phones Release 2.
