Aastra 142d (Aastra DECT 142) DECToverIP / SIP User Manual
Welcome to Aastra Thank you for choosing this Aastra telephone. It’s a high-quality product with a superior design. The following instructions will guide you in using your Aastra 142d and provide answers to all your most important questions. If you should require any further technical support or information about other Aastra products, please first contact the person responsible for your system or get in touch with your local retailer.
Table of Contents Using Your Telephone ...............................................................................................................1 Important Safety Information ……………………………………………………………1 Proper use / Declaration of Conformity …………………………………………………1 Power Supply / Power Failure / Rechargeable Batteries……………………………………1 Safety Precautions ……………………………………………………………………1 Communications Regulation Information …………………………………………………3 FCC Notices (U.S.
Table of Contents Handsfree Key ………………………………………………………………………19 Info Key ……………………………………………………………………………19 C-Key ………………………………………………………………………………19 R-key ………………………………………………………………………………20 Hash / Pound Key # …………………………………………………………………20 Star Key * ……………………………………………………………………………20 Number Keys …………………………………………………………………………20 Softkey: Menu ………………………………………………………………………21 Automatic Menu Closure…………………………………………………………………22 Menu Control ..........................................................................................
Table of Contents Transferring a Call ………………………………………………………………………41 Blind Transfer …………………………………………………………………………41 Consultative Transfer …………………………………………………………………42 Editing Lists ............................................................................................................................
iv
Using Your Telephone Important Safety Information Proper use / Declaration of Conformity Use in accordance with intended purpose / declaration of conformity. In all EU member states this product may be operated on a communication system that supports the specifications for an Open Mobility Management (OMM) system. The phone complies with the radio-specific, European-wide harmonised standards for DECT.
Using Your Telephone • Devices that generate strong magnetic fields, electrical appliances, fluorescent lamps, computers, radios, televisions, fax machines or telephones. • Areas where the equipment can be covered, its ventilation impaired or liquid can get inside. • Areas where there is excessive dust and areas subject to vibration, shock or extreme temperature fluctuations.
Using Your Telephone Communications Regulation Information FCC Notices (U.S. Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications not expressly approved by this company could void the user's authority to operate the equipment.
Using Your Telephone Industry Canada (Canada only) Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone. Exposure to Radio Frequency (RF) Signals: The wireless phone is a radio transmitter and receiver.
Using Your Telephone Overview and Basic Information General Information The Aastra 142d is a telecommunications device that you can operate on a communications system specified as compatible with an OpenMobilityManagement system (OMM). The newly designed menus enable easy handling and fast access to the many functions and features provided by your system. Make yourself familiar with your telephone equipment. You’ll discover many new functions that make communication and organization easier.
Using Your Telephone Headset Connector Your phone is equipped with a 2.5 mm jack for connecting a headset. In order to maintain electrical compatibility, it is important that you only connect the headset supplied as an accessory by Aastra.
Overview Handset: Earpiece Display Rear: Loudspeaker Arrow keys Softkey Softkey Handsfree key Info key Hook key Dialling keypad Cancel / Delete key Power on/off Connector for Headset R-key Emergency call key Anschluss für PC Microphone 7
Overview The Keys on the Handset DE Softkeys - the function allocated to each key is shown in the display. The key function changes automatically according to the respective operating state of the handset. If a function only permits you to switch between two options, these are allocated to the left and right softkeys. If more than two options are available, then the Options softkey will appear. F The local / individual telephone book can be opened from idle ( arrow key).
Installation Unpacking and Installing Your Telephone Unpacking Your Telephone The package contains: • Aastra 142d handset • Charger cradle • Plug-in adapter with a connector cable • Three rechargeable batteries • Memory card (either already inserted or separate, depending on the model) • Belt clip • Brief user guide Setting up the Charger Cradle Your telephone was designed for normal operating conditions.
Installation Commissioning the Charger Cradle In order to start operating your telephone, you must first plug in the charger cradle's power cable. Safety Precautions Only for use with plug-in adapters of the following type: ID No.: 22-001071-00 International- / Global version ID No.: 4512132 Continental Europe version (without UK) ID No.: 4516880 North America version ID No.: 4513788 UK version ID No.
Installation Commissioning the Handset Important Information about the Batteries Never use the batteries for any purpose other than that for which they were intended. Never use a battery which is damaged or worn out. Heat or cold reduces the performance and service life of the batteries. A handset with hot or cold batteries may be temporarily out of order even if the batteries are fully charged. Used batteries should be disposed of in accordance with local authority regulations.
Installation Charging and Operating Times Charging time: (empty batteries) to full capacity in approx. six to seven hours. Talk time: USA, Canada - approx. 18 hours (with fully charged batteries). All other countries - approx. 15 hours (with fully charged batteries). Standby time: USA, Canada - up to 125 hours (with fully charged batteries). All other countries - up to 140 hours (with fully charged batteries). Note If the battery charge is unknown, they will be fully charged in approx. 14 hours.
Installation Inserting the Memory Card If a memory card was not in your handset when you first unpacked the phone, then you will have to insert it in its slot in the battery compartment yourself. Important note on safety Take great care handling the memory card. The contacts should be free of dust, grease, moisture, etc. Do not store your card in a place where it will get hot (e.g., through direct exposure to sunlight). Avoid bending the memory card, as the contacts may get damaged as a result.
Installation Charge Display The charge status of the batteries is indicated on the display: ƒ „ √ … † † batteries are 81 - 100% charged batteries are 61 - 80% charged batteries are 41 - 60% charged batteries are 21 - 40% charged batteries are 0 - 20% charged (frame flashes) batteries are almost empty; a warning has been given. Your handset has a battery management system which has to ascertain the limits of the battery charge status first before it can output the correct status to the display.
Installation Registering Your Handset Your handset can be operated on up to ten different communications systems. To do so, it has to be registered to each system. Your system administrator will register the handset for operation on a communications system with OpenMobilityManager. If you want to register your handset on any other communications system, please refer to the relevant documentation.
Display Arrangement, Softkeys, and Other Keys Display Arrangement ‹ œ ¢ Œ ƒ OMMSIP 5050 pp5050 19.10.06 ª 16:27 Menu ¬ ¤ 16 Icon line System name with internal phone number/Call time Programmed user name Date / time / alarm Softkey line œ Radio link quality (four bars – good link; only one bar – weak link). ¢ Connection state (hook key pressed down). » Connection state (handsfree mode activated). ‡ Microphone is muted. ≥ Messages in the voice box. ‹ Ringer is deactivated.
Display Arrangement, Softkeys, and Other Keys Text Lines The three lines in the center of the five-line display contain information on the current connection state, or lists and menu texts. In the idle state you will see the name of the system along with the internal phone number, your programmed user name, the current time, any alarms that you have programmed, and call forwarding if you have activated it.
Display Arrangement, Softkeys, and Other Keys Softkeys and Other Keys The two keys below the display and the arrow keys are called the softkeys. The functions allocated to these keys are shown in the bottom line of the display. The key function changes automatically according to the respective operating state of the handset.
Display Arrangement, Softkeys, and Other Keys Softkey: Redialing This enables you to select a phone number from the redial list. Hook key Depending on the current state of the phone — for example in the idle state, during a conversation, or in editing mode — pressing the hook key executes the following functions: ... in the idle state: you seize a line. ... during an incoming call: you answer the call. ... during a conversation: you end the conversation by disconnecting the call. ...
Display Arrangement, Softkeys, and Other Keys ... when your handset is switched off: short or long press: switches the handset on. ... in the idle state: short press: opens the caller list. long press: switches the handset off. ... during an incoming call: long press: switches the handset off. ... during a conversation: long press: switches the handset off. ... while you are making entries: short press: deletes the character to the left of the cursor. long press: deletes the entire line. ...
Display Arrangement, Softkeys, and Other Keys When you input text, you use the arrow keys to move the cursor to the beginning or the end of the -key deletes one letter or digit at a time. The Esc softkey aborts the procedure. entry. The For further information, please refer to the section entitled “The Editor” on page 26. C Softkey: Menu A long press in the idle state/connection state opens the OpenMobilityManager (OMM) service menu.
Display Arrangement, Softkeys, and Other Keys Automatic Menu Closure Menus are automatically closed under the following conditions: • When you receive a call while your phone is in the idle or connection state. • In the connection state, when you perform input that requires a new, connection-dependent to make an enquiry call; please see the secmenu (for example, when you press the R-key tion entitled “Making Calls”).
Menu Control Example: Main Menu Press the Menu softkey to open the main menu. Menu Key Lock Alarm Ringer Settings OK ‘ Esc The following items are available: - Key Lock - Alarm - Ringer Settings - Volume Settings - Caller Filter - System - [System name] (the communications system menu/switching functions: Only appears when you are logged into such a system) - Telephone Options - Security Use the arrow keys to highlight an entry. Press OK to open a submenu.
Menu Control Type Repeat Play once OK ‘ Use the arrow keys to select Play once, for example, and press OK . Your setting will be activated. “ Esc Toggling function Some functions permit only two options - ON or OFF. Active (ON) functions are indicated by a ✓ , for ✓ . example Alarm If the function is not active, the icon — appears, for example Alarm OK softkey to toggle between settings. – .
Menu Control Example: Telephone Book / Editor This example describes how to create a new entry in the telephone book. For information on further telephone book options, please refer to page page 43ff. Use the arrow key to open the telephone book. Telephone Book Empty New Esc Enter Number: 12349876_ OK {} Esc Enter Name: Adm_ OK {} Esc Press New . The phone number input opens. Enter “12349876_”, for example.
Menu Control The Editor Entering Names / Phone Numbers You can use the editor to enter new names or numbers in lists, or edit them (e.g., in the telephone book). The maximum length a phone number can have is 32 digits, and the maximum length of names is 16 characters. Key 1 2 3 4 5 6 7 8 9 0 ✳ # 26 Upper-case letter Lower-case letter ?!1-+*/=&()%¿¡ ABC2ÄÅÀÁÃÆÇ DEF3ÈÉÊË GHI4ÍÌÎÏ JKL5 MNO6ÑÖÒÓÔÕØ PQRS7ß TUV8ÜÙÚÛ WXYZ9 Space , .
Basic Functions Switching the Handset On / Off Once the batteries have been charged for the first time, your handset is automatically switched on and is ready for operation. You can switch the handset off so that your batteries will stay charged for longer. Switching the handset off C Press and hold down the C key. Note Your handset cannot receive calls or signal programmed alarms while it is switched off.
Basic Functions Key Lock Activate the key lock before putting your handset in a bag or your pocket to prevent a call from being made accidentally. If you receive a call, the key lock is deactivated for the duration of the call. You answer the call by pressing the hook key. Activating the Key Lock D Press Menu F Key Lock . OK . You’ll see Key Lock in the display. Alternatively you can activate the key lock as follows: #.
Basic Functions Adjusting the Earpiece Volume during a Call Let’s say you’re making a call using the earpiece, the loudspeaker, or a headset. You use the arrow keys or the number keys to adjust the volume. A single press increases or decreases the volume by one level, e.g., Volume:3 . In addition, the bar indicator ]]]]]||| shows the selected volume level. You can also press the corresponding key a number of times to adjust the volume to one of eight levels.
Basic Functions Emergency Number (SOS) r In order to be able to make an emergency call with just a single long press of the R key , you must first store this emergency number using the “Telephone Options > Emergency Call” menu item. You make the emergency or SOS call to the programmed phone number by pressing and holding . The call is dialed right away, so you don't have to press any more keys. The down the R key handset goes into handsfree mode.
Making Calls Dialing Phone Numbers Dialing Phone Numbers Directly A Press the hook key. t Enter the phone number and press #; the phone number will be dialed right away. ... or D Press Menu . F Select one of the following menu items and confirm it by pressing OK . Caller List Select a phone number from the caller list and initiate dialing with Options / Dial . Redial Select a phone number from the redial list and initiate dialing with Options / Dial .
Making Calls Making Calls Using the Predialing Feature You can use predialing to correct your input before dialing the number or to chain phone numbers from different lists. t Enter the phone number while the handset is in the idle state. If necessary, correct any errors you’ve made with the arrow keys (cursor) and the C key by deleting them and entering the right input. A Press the hook key to dial the number. ...
Making Calls Making Calls Using the Quick Call Feature t Press and hold down the number key “1” – “9” on which the quick call entry is saved until the number appears in the display. A Press the hook key to dial the number. For information on creating a quick call entry, please see page 45. Note If you activate the “Auto Quick Hook” feature in the “Telephone Options” menu, the quick call number will be dialed immediately without being copied to predialing.
Making Calls Making Calls from the Redial List The redial list contains the last 20 phone numbers you dialed (max. 32 digits long). Every number you subsequently dial overwrites the oldest number in the list. You can view the phone numbers in the redial list, together with the corresponding details (the time of the call, for example), delete them, and copy them to predialing, to the telephone book, or to the caller filter. E Press ¤ while the handset is in the idle state.
Making Calls Calling from the Local Telephone Book The local telephone book can store up to 100 entries, which are automatically sorted alphabetically. F Press the arrow key while the handset is in the idle state and select the name you want F or t search for the name by entering the initial letter (if necessary, press the number key several times in quick succession). A Press the hook key to dial the number immediately … or D Press Options .
Making Calls Making Calls from the Caller List B Press the info key to open a list with the following items for selection: voice box, caller list, redial list and telephone book. The voice box entry only appears if your voice box access number has been registered in the “Telephone Options > Voice Box No.” menu. The procedures for making calls from the telephone book and the redial list are described above.
Making Calls Answering Calls Calls are signaled on the handset both acoustically and on the display, which is then illuminated. You’ll see the caller's phone number in the display. In addition, you’ll see the caller's name in the upper text line. œ ¢ 5051 pp5051 Menu ƒ ‘ Silence The phone number will not be displayed if the caller is calling anonymously, i.e., if the caller has suppressed phone number transmission, or if for any reason the phone number is not transmitted.
Making Calls Options during a Call If required, you can select a phone number from one of the available lists and postdial it during the current call by pressing OK (DTMF postdialing). D If required, press Menu briefly. F Select one of the following menu items, and confirm this by pressing OK . Telephone Book Open the telephone book. Redial Open the redial list. Caller List Open the caller list. Microphone off Mute the microphone. A Press the hook key to end the call.
Making Calls Answering a Call during a Conversation (Call Waiting) If you do not want to be disturbed, you can disable call waiting completely (see page 55). You hear the call-waiting tone and see the call in your display. œ ¢ ƒ Call from pp5052 5052 Menu ‘ Mic.‡ You see the caller's name and phone number. r Press the R key to answer the call. The first call is then held. ... or: B Press Info Key to open the service menu. , and confirm this by pressing F Select w: pp5052 OK .
Making Calls Making Another Call during a Conversation (Enquiry Call) In the menu (see page 55) you can set whether you are reminded about waiting subscribers during an enquiry call. If the function is enabled, you hear a short call or brief signal during your call after a set time. Making an Enquiry Call You are making a call. r Press the R key. The first call will be held. t Enter a phone number using the number keys, then press # (or wait four seconds).
Making Calls Toggling during the Enquiry Call If the enquiry call can be established, you can use the R key two parties (this is known as “toggling”). r to speak alternately with the other ... or: B Press Info Key to open the service menu. , and confirm this by pressing F Select h: xxx OK . The currently held call will be activated and the active call held.
Making Calls Consultative Transfer You are making an enquiry call and your handset is in the toggle state (see above): B Press Info Key to open the service menu. , and confirm this by pressing F Select call transfer OK . Your handset returns to the idle state. If the desired party is busy or cannot be contacted: Press the R key to return to the first call.
Editing Lists Local Telephone Book: New Entry The telephone book can contain up to 100 entries. Phone numbers can be up to 32 digits long and names up to 16 characters. When there are no entries in the telephone book: F Press the arrow key while your handset is in the idle state. D Press New . t Enter the phone number and press OK (for information on how to make corrections, please refer to page 26).
Editing Lists Local Telephone Book: Editing an Entry F Press the arrow key while your handset is in the idle state, and scroll to the entry F or search for the name by entering the initial letter t(if necessary, press the number key several times in quick succession). D Press Options . F Select one of the following menu items and confirm this by pressing OK . Edit You can edit the number and the name. Add To Copies the phone number to predialing or to the caller filter (see page 53).
Editing Lists Local Telephone Book: Creating a Quick Call Entry You can define important telephone book entries as quick call entries and dial these numbers by pressing just a single key. You can create up to nine quick call entries (corresponding to the number keys "1" to "9"). Those telephone book entries defined as quick call destinations are identified by the corresponding quick call code number placed behind the name.
Editing Lists Editing the Redial List D Press the ¤ softkey while your handset is in the idle state, and then select the desired entry, e.g., 43567890 . D Press Options . F Select one of the following menu items and confirm this by pressing Add To Copies the phone number to predialing, to the telephone book, or to the caller filter (see page 53). Details The entry details (the called party's name/number and the date/time of the call) are displayed.
Editing Lists Editing the Caller List B Press the info key while the handset is in the idle state. , and confirm this by pressing F Select Caller List . F Select the desired entry, e.g., 43567890 OK . Accepted calls are marked with a ✔, missed calls with a ➜ , filtered calls with a ¿ and rejected calls with a Œ. D Press Options . F Select one of the following menu items and confirm this by pressing OK .
Info Key Voice Box / Caller List Press the info key briefly while your handset is in the idle state. The following options will then be available: voice box, caller list, redial, and telephone book. The info key Bflashes to signal voicemail and missed calls. Display icon Text in the idle display Meaning ≥ flashes Voice Box There are new messages in your voice box Missed Calls There are new entries in your caller list.
Customizing Your Telephone Menu: Alarm D Press Menu . , and confirm this by pressing OK . F Select Alarm F Select one of the following menu items and confirm this by pressing Alarm active OK . Press OK to activate ✔ or deactivate — the alarm. An activated alarm appears in the display as ª . Set At a given 24h time format, enter the time between 00:00 and 23:59. At the12h time format the time can be entered between 00:00 and 11:59.
Customizing Your Telephone Menu: Ringer Settings D Press Menu . F Select Ringer Settings , and confirm this by pressing OK . F Select one of the following menu items and confirm this by pressing OK . You can specify different melodies to identify different types of incoming calls. However, transmission of the call type depends on the communications system on which you are operating your handset. For further information, please contact your system administrator.
Customizing Your Telephone You can specify whether an incoming call is to be indicated by the ringer (”buzzer”), the vibrator, or the headset. Select an entry and activate ✓ or deactivate – the device by pressing OK . Device … Buzzer ✓ … Vibrator ✓ … Headset ✓ Press Esc to accept the setting. Volume Settings Use the arrow keys or the number keys "1" to "8" to set the desired ring volume, then press OK .
Customizing Your Telephone Menu: Volume D Press Menu . F Select Volume Settings , and confirm this by pressing OK . F Select one of the following menu items and confirm this by pressing 52 OK . Earpiece Use the arrow keys or the number keys "1" to "8" to set the desired volume level for the earpiece, then press OK . Hands-free Use the arrow keys or the number keys "1" to "8" to set the desired volume level for the loudspeaker (speakerphone), then press OK .
Customizing Your Telephone Menu: Caller Filter You can use the caller filter to block or accept incoming calls from certain phone numbers. The phone numbers in question have to be stored in the caller filter's list of numbers (see below). You can copy phone numbers to the caller filter list from the telephone book, the redial list, or the caller list (see the section entitled "Editing Lists" on page 43ff). An entry can consist of up to 32 digits for the number and 16 characters for the name.
Customizing Your Telephone Menu: System Your handset can be operated on up to ten DECT systems. Before you can make a call via a system, however, your handset has to be registered on the respective system. A system password or registration code may be necessary for the registration process. If this is the case, please contact your system administrator for assistance. If the handset has not been registered, No System will appear in the display. D Press Menu . , and confirm this by pressing OK .
Customizing Your Telephone Menu: [System name] This accesses the communications system menu. This menu is only available when the handset has been logged into a system. NB The entries and features that are actually available may differ from those described in this user guide as they are dependent on specific conditions. If necessary, contact your system administrator. D Press and hold Menu . or Press Menu , select [System name] , and confirm this by pressing OK .
Customizing Your Telephone 56 Lines This menu item currently has no function. Quit it by pressing Esc . local menu This accesses the local menu (corresponds to pressing Menu ).
Customizing Your Telephone Menu: Telephone Options You’ll find all the individual settings for your handset in this menu. D Press Menu . F Select Telephone Option , and confirm this by pressing OK . F Select one of the following menu items and confirm this by pressing OK . Language Select one of the available languages for your display, and confirm this by pressing OK .
Customizing Your Telephone Select one of the following menu items and confirm by pressing OK . Emergency Call … SOS beep ✓ … Determine whether an SOS call is signaled by a loud tone on the handset (so that the handset / person can be ✓ . located). Confirm the setting by pressing OK … Hands-free ✓ You can set the handset to switch to handsfree mode during an emergency call. This allows the recipient of the call to hear what is happening and be heard in the room. ✓ .
Customizing Your Telephone phone number in question is first copied to predialing, where you can add digits if required. You can press OK to activate ✓ or deactivate – this feature. Auto.key lock Charging LED ✓ ✓ If this is activated, the keypad will automatically be locked 60 seconds after your last keypress. You can press OK to activate ✓ or deactivate – this feature. If this is activated, the display backlight will switch on automatically whenever you take the handset out of the charger cradle.
Customizing Your Telephone Reset Select one of the following menu items and confirm by pressing OK . … Handset Following a security check, the handset will be reset to the initial delivery state. This means that all settings / entries will be deleted with the exception of the system registration and PIN. … Telephone options Here, it is only the settings under the “Tele- phone options” menu (see page 57 onwards and page 62) which are reset.
Customizing Your Telephone Menu: Security This menu access option allows you to lock the keypad to prevent unauthorized use. For this, you require a PIN (Personal Identification Number). The default PIN is 0000 (4 zeros). D Press Menu . and confirm by pressing OK . F Select Security t Enter your PIN and confirm by pressing OK . F Select one of the following menu items and confirm by pressing OK . Lock handset Confirm by pressing OK and the handset is now locked. “PIN Lock” appears on the display.
Appendix Default Settings - - - - 62 Alarm: off Ringer Settings: - Melody - internal: 1 - external: 2 - unknown number: 4 - VIP: 5 - Alarm: 7 - Emergency Call: 13 - Type: Repeat - Device: Buzzer, Vibrator, Headset on - Volume Settings: Buzzer 3 Volume Settings - Earpiece: 3 - Hands-free: 3 - Headset: 3 - Buzzer: 3 Caller Filter - Filter off - List of numbers: no entry System - Subscriptions: no entry Telephone Option - Language: English - User Name: no entry - Attention tones: - Key Click: on - Coverag
Appendix Important Information about the Batteries Always switch the handset off before removing the batteries, as otherwise data could be lost. 1. Use only nickel metal hydride (NiMH) rechargeable batteries. The talk times, standby times, and charging times stated below (see the section entitled "Technical Data") only apply when batteries with a capacity of 700 mAh are used. Three size AAA NiMH rechargeable batteries are included in the original product package.
Appendix 11. In some countries, the law requires used rechargeable batteries to be returned. Do not throw batteries into your household waste. Dispose of used batteries in accordance with your local regulations, and recycle them whenever you can. The batteries can contain substances such as nickel-cadmium (NiCd), lead (Pb), cadmium (Cd), or mercury (Hg). Care and Maintenance Your telephone is a product that meets the highest design and manufacturing standards. It should therefore be treated with care.
Appendix • 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) have been transferred into national law in all EU member states.
Appendix Limited Warranty (for sale in USA, Canada) Aastra warrants this product against defects and malfunctions during a one (1) year period from the date of original purchase. If there is a defect or malfunction, Aastra shall, at its option, and as the exclusive remedy, either repair or replace the telephone set at no charge, if returned within the warranty period. If replacement parts are used in making repairs, these parts may be refurbished, or may contain refurbished materials.
Appendix After Warranty Service Aastra offers ongoing repair and support for this product. This service provides repair or replacement of your Aastra product, at Aastra's option, for a fixed charge. You are responsible for all shipping charges. For further information and shipping instructions; In North America, contact our service information number: 1-800-574-1611. Outside North America, contact your sales representative.
Appendix Technical Data valid for … 68 Standard: USA, Canada DECT / GAP All other countries DECT / GAP No.
Appendix Menu Structure Key Lock on/off Alarm Alarm active Set Date / Time Melody Ringer Settings Melody Type Device Internal External Unknown Number VIP Alarm Emergency call Repeat Play once Buzzer Vibrator Headset Volume Settings Volume Settings Earpiece Hands-free Headset Buzzer Caller Filter Accept list Block List Filter off List of numbers System Subscriptions IPEI Version Number Systemname (depends on the system being operated/ only appears after login) Telephone Option Language Deu
Appendix User Name Attention tones Emergency Call Voice BOX No. Loud environment Auto Answer Silent Charging Charger Answer Auto. Quick Hook Auto.key lock Charging LED Disp.
Appendix Index of Key Words A Alarm............................................................49, 50 Answering a call................................................37 Attention tones.................................................57 Auto answer ......................................................58 Auto. key lock....................................................59 Auto. quick hook...............................................58 Auto. search.......................................................
Appendix Keys on the handset...........................................8 L Language ...........................................................57 Local telephone book ......................................35 Local Telephone Book: New Entry .................43 Lock handset .....................................................61 Loud environment............................................58 M Main menu (example) .....................................23 Maintenance .............................................
Version Number................................................54 VIP .......................................................................50 Voice Box............................................................48 Voice box access number................................58 Volume ...............................................................
Aastra 142d (Aastra DECT 142) DECToverIP / SIP Copyright 20098 Aastra All Rights Reserved 30.04.2009 • Version 2 • The right to technical changes is reserved.
