User Guide EN Owner manual

59Dialog 4223 Professional/Dialog 4225 Vision
Call Metering
Automatic Timer
The timer automatically starts when the called person answers, and
automatically stops when the call is finished. Both outgoing and
incoming calls are measured.
If you make inquiries, conferences, or put calls on hold, etc. during the
call, the timer is not stopped. I.e. the time measured is the total time
from when the first called person answers, until the call to the last
connected person is finished.
Note: The timer shows the elapsed time from the last call until
a new call has been answered. If you need to keep a record of
your calls, always write down the time at once when a call has
been finished.
Timer Press to show the Call Duration feature (see display).
If
Timer is not shown, press more... until it appears.
The display shows:
Key functions that are available during call duration mode:
ShowDate Press to show date (see display).
Exit Press to exit the Call Duration feature (see display).
ShowTimer Press to show the measured time (see display).
11:06 00:00
R. Towers 0012345678
ShowDate Exit
Program PhoneSet CallList PhoneBook Messages
R. Towers 0012345678
ShowDate Exit
11:06 00:00
Brown James
2222