User Guide EN Owner manual

93Dialog 4223 Professional/Dialog 4225 Vision
Settings
Program or change a feature
Ô Press the key to program or change.
Notes:
If the key is already programmed, the number or feature will be
displayed. If you do not want to change the programmed
feature, press
Exit to leave the menu without saving the changes.
To erase a programmed feature, press the Clear key, and press
Exit to leave the menu.
z Enter phone number or a feature code according to the list in section
“Features and required data”.
Notes:
If a wrong number is entered, press the Clear key to erase it, and
then enter the number again.
You can continue programming another function key (repeat
from “Press the key to program or change”).
ÕÔ Press the function key again.
Exit Press to finish programming (see display).
Remove the transparent cover and write the feature name or phone
number beside the key.
Note: Use the DCM (Designation Card Manager) to make and
print your own designation cards. DCM is included on the
Enterprise Telephone Toolbox CD or it can be downloaded
from:
http://www.aastra.com
For more information, please contact your Aastra certified
sales partner.