User Guide

Operational Features
41-001129-00 Rev 09, Release 1.4.1 5-113
Operational Features
Operational Features
Configuring Intercom Calls and Auto-Answer
You can configure the Intercom feature and auto-anaswer using the configuration
files or the Aastra Web UI.
Use the following procedures to configure Intercom calls and auto-answer on the
IP phone.
Note: An administrator can configure the incoming and outgoing
Intercom feature. A user can configure the incoming Intercom feature
only.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Intercom and
Auto-Answer Settings” on page A-82.
Aastra Web UI
Outgoing intercom settings:
1 Click on Basic Settings->Preferences->Outgoing Intercom Settings.