User Guide

480i IP Phone User Guide 21
Handling Calls
5. If you do not wish to add the
new party to the conference,
press the Nbutton while
connected to this new call. This
disconnects the new party,
leaving the original call on hold.
To go back to the original call,
press the line/call appearance
button for this call.
6. If you wish to add the new
party to the conference, press the
= button again.
7. To drop a party from the
conference, use the navigational
keys to navigate to the desired
party’s call appearance screen or
press the Next and Previous
softkeys (if visible), and then
press the Drop softkey.
Note: If you disconnect from the
conference, the other two parties
will also disconnect.
Picking up Calls
If you are juggling multiple
calls, you can scroll through call
information by pressing the
3 and
4 navigation keys. If you wish to
connect to an incoming call or
re-connect to a call you placed on
hold, press the line/call
appearance button for the call or
press the Pickup softkey.
If the phone is already connected
to a call, pressing the line/call
appearance button for the new
incoming call will automatically
place the connected call on
hold and answer the new call.
Ending Calls
To end a call, you first need to
connect to the call, if not already
connected, and press the N
button or the Drop softkey. If
connected through the handset,
you can also place the handset
back on hook to end the call.