Operation Manual

Supplementary features
eud-1279/1.0 – R1.0 – 12.2010 31
To answer the callback request
Someone has asked you to call back. You can tell this from the lit attention LED in the
idle state. The display shows Callback requested.
Call waiting on an internal user
You want to talk to an internal user. However, the person is busy.
As a result of your call waiting, the person hears a call waiting tone and your phone
number or name appears on his display. The person can either answer, deflect or
reject your call.
Requirement: It is essential that the internal user has not barred the Call waiting func-
tion on his phone (for configuration see the Chapter "Activating protection against
call types", page 70).
Ask your system administrator whether the Call waiting function is enabled on the
system.
Call
To answer the callback request:
Press Foxmenu > Foxkey Call.
➔The phone number is dialled.
Delete
Clear callback:
Press Foxmenu > Foxkey Delete.
➔Callback is deleted.
Note:
The callback can be changed via Menu > Activated features > Delete or Call as
long as it was not answered or cancelled by the system.
Call waiting
User is busy:
Press Foxmenu > Foxkey Call waiting.
➔You hear the dialling tone.
Note:
If the person rejects your call request or if call waiting is not possible, the call is,
depending on the system’s configuration, disconnected (busy tone) or for-
warded to a preconfigured destination.