Operation Manual

Supplementary features

eud-1279/1.0 – R1.0 – 12.2010 33

Starting an announcement

You want to address internal users directly via their loudspeaker – where available – ,

without waiting for a reply (similar principle to that of an intercom system).

Requirement: It is essential that the internal user has not barred his phone against

announcement (for configuration see the Chapter "Activating protection against call

types", page 70).

Receiving an announcement

You are made aware of the announcement by an acoustic signal, the display shows

Announcement. You will be addressed via your loudspeaker.

You can listen to the announcement or stop it.

Pick up the handset.

Announcement

Press Foxmenu > Foxkey Announcement.

Select destination (User or Group) and confirm with the Ok Foxkey.

Enter the phone number and confirm with the Ok Foxkey.

➔User is made aware of the announcement. You can now talk.

Note:

You can also search in the phone book, last-number redial list or call list for the

phone number of the person you are looking for.

Press Foxmenu > Foxkey Menu > Call features > Announcement > User/Group to

start the announcement.

To continue the announcement as a phone call:

Pick up the handset.

➔You are now connected to the person who initiated the announcement.

Note:

If the announcement was started to a group, all the other recipients of the

announcement are excluded.

To stop the announcement:

Press the End key.

☛