Operation Manual

Personalizing your phone
eud-1279/1.0 – R1.0 – 12.2010 77
Function commands
You can use function commands to define a function to suit your personal require-
ments. A function can consist of one or more function commands, function codes,
and the phone number. You can either carry out a function directly or store it under a
function key (select configurable function).
Tab. 1 The following function commands are available:
Tab. 2 Examples of how to define a function:
*/# Procedures
A list with all the function codes can be found in the "User’s Guide */# Procedures" on
the Aastra document portal as electronic document.
"A" Seize line with highest priority
"I" Seize line
"X" Disconnect
"P" 1Pause 1 second before the next operation
"N" Use the phone number entered in call preparation
"." Control key function (up-circuit system)
"Z" Activate/deactivate DTMF mode
"R" Use the phone number last dialled
"Y" Disconnect and reseize the line
"IR"
Seize line ("I"),
Dial phone number last dialled ("R")
"I201" Seize line ("I") and dial phone number 201
"I*21201X"
Seize line ("I"),
activate call forwarding unconditional ("*21") to phone number 201,
disconnect ("X")
Notes:
• Text mode has to be activated before you can enter function commands.
• Functions that are not available via the menu can be activated using */# pro-
cedures (see "User’s Guide */# Procedures" on the Aastra document
portal: www.aastra.com/docfinder).
• You can either type in a */# procedure directly or store it under a key.
• You can only activate certain */# procedures if the same function cannot be
obtained via the menu.
• The availability of certain */# procedures may be restricted depending on
the system and software version.