User`s guide

Personalizing Your Phone

eud-0840/2.1 — I7.7 — 10.2008

■ Store a function under a key– function key

You want to retrieve a frequently used function - for example "call forwarding on no reply" -

using a single keystroke rather than having to enter it by hand. Usually the function is assigned

so that you:

• activate the function with the first keystroke,

• and deactivate the command again with a second keystroke.

■ Clearing a Key

You want to clear the assignment made to a configurable key.

The No function function is provided specifically for this purpose.

To store a function under a configurable key:

<long>

Press the key and hold it down for a moment.

➯ Display shows choice of key types.

Function key

Scroll to Function key and press the Select Foxkey.

➯ The currently set function is displayed with .

Select the function you want and press the Select Foxkey.

➯ The further prompting depends on the function (see Chapter "Supplemen-

tary features", page 20). Once you have made all the settings, the function

is stored under the key.

Note:

Besides the predefined functions you can also define your own function. For

more information please refer to the Chapter "Function Commands", page 58.

<long>

No function

To clear a configurable key:

Press the configurable key and hold it down for a moment.

➯ The display shows the key type.

Scroll to No function and confirm Ok with the Foxkey.

➯ The key configuration is cleared.