User`s guide
Installation and First-Time Operation
65
eud-0840/2.1 — I7.7 — 10.2008
■ Wall mounting
You can also mount the phone on the wall. To do so, screw the stand rest onto the wall as a
bracket and hook the phone onto the stand rest.
• Fit the screws for securing the stand rest and mount the stand rest (Figure A).
• Connect the handset and phone cord to the phone (Figure B). For the correct connection
assignment refer to Chapter "Connecting Aastra 5360", page 66 and "Connecting
Aastra 5360ip", page 67.
• Insert the phone into the stand rest horizontally (Figure C-1) and slide downwards (Figure
C-2).
• Unscrew the cams for holding the handset (Figures D-1 to D-3).
• Insert the handset.
Note:
As there is only a limited amount of space between the sockets on the back of the phone and the wall on
which it is mounted, you need to use a ribbon cable with a short connector for the cord. Ask your dealer
for a list of suppliers for a suitable ribbon cable (only Aastra 5360ip).
1
2
2
3
C
D
151 mm
145 mm
130 mm
65 mm
3.5 mm