Operation Manual

Personalizing your phone
58 Aastra 6730i/6731i/6753i
eud-1614/1.0 – R3.0 – 09.2013
Enter the display text for the idle state
You want to change the text displayed by your phone in the idle state.
The display text shown in the idle state on your phone is configured using the Aastra
Self Service Portal. For more information about the Aastra Self Service Portal, please
refer to chapter "Aastra Self Service Portal", page 7.
Local IP settings
The specific data for your phone is saved in the option key menu > Phone status or
Menu > Information. The input of this data is password-protected; it can therefore only
be carried out by your system administrator. You can however call up the data.
Restarting the phone
This menu is used to restart your Aastra SIP phone if necessary.
Please note that certain settings that have been changed only come into effect after
restarting the phone. These include loading a new language or phone software.
Calling up the phone status:
Press the option key.
Phone status
Scroll to Phone status and press the navigation key to the right.
➔ Settings are displayed.
Menu
Calling up the system menu:
Press the Menu Foxkey.
Information
Scroll to Information and press the Enter softkey.
➔ Settings are displayed.
Press the option key.
Restart phone
1. Scroll to Restart Phone and press the navigation key to the right.
2. Confirm the security prompt.
➔ The phone is restarted.