User Guide

6
Checking your telephone
When you first plug in your 8314, you may see a message asking you to make a language selec-
tion. Follow the directions on the display to select one of the languages.
Your telephone also runs a test to ensure that the line cord is connected properly. If the test fails,
the display prompts you to check the line cord. Make sure that all connections are fastened
securely.
Desk Mounting
Lower the stand into the slots on the base of the telephone and slide the stand back until
it clicks into the locked position. The excess line cord fits into the stand of the telephone.
Optional Wall Mounting
Lower the stand into the slots on the base of the telephone and slide the stand back until
it clicks into the locked position. The excess line cord fits into the stand of the telephone.
Note: The Load Number (LN) is 14 and the Ringer Equivalence Number (REN) is 1.4B for the
8314 telephone. Please see the base of your telephone or the Regulations sheet for more
regulatory and safety information.
†
We recommend that you use a wall mounting plate, which your local telephone company can install.
Desk
Mount
Desk
Mount
Wall
Mount
†
Wall
Mount
†
P0749459 02 E UG 8314 Page 6 Thursday, March 30, 2000 10:16 AM