User's Manual

16
Deleting memory keys
Note: The Live dial pad option must be turned OFF to edit memory keys.
Saving features in memory keys
For easy access, you can save the feature codes of telephone company services in your memory
keys. This works well with network features such as Call Forwarding, Call Screen, and Call
Return. Some features require an ON and OFF code in two separate keys, while other features
are stored on only one key. The following procedures show you how to save both an ON and
OFF code.
Using feature keys
When a memory key is programmed with a feature code, you can use the memory key to activate
or deactivate the feature.
To delete a memory key:
1. To see its contents, press the memory key.
2. To erase, press
£ twice.
To save a feature ON code: To save a feature OFF code:
1. Press
ß. 1. Press ß.
2. Press the memory key where you want to
save the number.
2. Press the memory key where you want to
save the number.
3. Enter the telephone company feature
code for turning the feature ON.
†
†
Note:Contact your telephone company or Telecom manager for the appropriate feature codes.
3. Enter the telephone company feature
code for turning the feature OFF.
†
Read the display to confirm the number. Read the display to confirm the number.
4. Press
ß. 4. Press ß.
5. Enter the feature name using the dial
pad. (See Entering Names on page 12.)
5. Enter the feature name using the dial
pad. (See Entering Names on page 12.)
6. Press
ß. 6. Press ß.
7. Label the memory key. (See the diagram
on page 15.)
7. Label the memory key
. (See the diagram
on page 15.)
To turn a feature ON or OFF:
1. Press the memory key where you stored the desired feature. The display shows the feature
name and code.
2. Lift the handset or press either
© or ∂.
The feature code is dialed out, which turns the feature ON or OFF.
P0749459 02 E UG 8314 Page 16 Thursday, March 30, 2000 10:16 AM