User's Manual

17
Saving a feature and light in memory keys
You can make the set indicator light come ON when you turn a feature ON and go OFF when
you turn that same feature OFF. You can only do this with one feature. This works well with any
service that has separate ON and OFF codes such as Call Forwarding.
For example, you may want the light to remind you that you have turned Call Forwarding ON.
To do this, use one key to turn the indicator light ON when you activate the feature. Use the sec-
ond key to turn the indicator light OFF when you deactivate that same feature. The following
procedure shows you how to program a FeatureLight ON and OFF key.
Using FeatureLight keys
To save a FeatureLight ON key: To save a FeatureLight OFF key:
1. Press
ß. 1. Press ß.
2. Do NOT select a memory key yet.
To program the light ON, press
.
2. Do NOT select a memory key yet.
To program the light OFF, press .
3. Press the desired memory key. 3. Press the desired memory key.
4. Enter the telephone company feature
code for turning the feature ON.
Note:Contact your telephone company or Telecom manager for the appropriate feature codes.
4. Enter the telephone company feature
code for turning the feature OFF.
5. Read the display to confirm the number. 5. Read the display to confirm the number.
6. Press
ß. 6. Press ß.
7. Label the memory key.
(See the diagram on page 15.)
7. Label the memory key.
(See the diagram on page 15.)
To turn a feature and light ON or OFF:
1. Press the memory key where you stored the FeatureLight.
The display shows
FeatureLight ON or FeatureLight OFF.
2. Lift the handset or press either
© or .
The feature and light turn ON or OFF. (When the feature and light are ON and you’re not
using the telephone, the display shows Feature ON as a reminder.)
P0749459 02 E UG 8314 Page 17 Thursday, March 30, 2000 10:16 AM