User's Manual

Operational, Basic, and Advanced Parameters
41-001160-01, Rev 00, Release 2.3 A-35
UPnP Settings
Parameter –
upnp manager
UPnP
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings->UPnP
Aastra Web UI Advanced Settings->Network->
Advanced Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description Enables or disables Universal Plug and Play (UpnP) on the IP phone. If
you set this parameter to “0”, you can manually configure NAT on the IP
phone and the UPnP manager will not start.
Format Boolean
Default Value 0 (false)
Range 0 (false)
1 (true)
Example upnp manager: 1
Parameter –
upnp gateway
Configuration Files aastra.cfg, <mac>.cfg
Description IP address or fully qualified Domain Name of the Internet gateway or
router. This parameter stores the IP address of the gateway or router in
the event that only non-default UPnP gateways get discovered on the
network. The UPnP port mappings are saved to this IP address so even if
the phone reboots, it will still have the correct port mappings.
Format IP address or fully qualified Domain Name
Default Value 0.0.0.0
Range Not Applicable
Example upnp gateway: 120.400.003.2