User`s guide

Personalizing your phone
70 eud-1290/1.0 – R1.0 – 01.2011
Setting the LED indicator
You want the attention LED to inform you of any phone incidents.
You can activate or deactivate the following settings:
• In Service: The phone is switched on.
• Incoming call
• Info
• Appointment call: Function can only be set with a function code, see Chapter "*/#
Procedures", page 86)
• Hands-free operation
• Battery empty
Setting the volume
All the ring tone properties are set using the profiles, see Chapter "Profile set-
tings", page 71.
Setting the volume during a call
You want to adjust the volume while in a call. You have to set the volume of handset
and loudspeaker separately.
The new volume will remain stored even after the call is ended.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
LED indications
Scroll to LED indications and press the Select softkey.
<LED setting>
Scroll to the LED setting you want and confirm with the Select softkey.
Louder: Press top side key.
Quieter: Press bottom side key.