User manual

21/1551-ASP 113 01 Uen N2 2014-01-28 83
T
ELEPHONY SERVER SOFTWARE
System, data backup, license handling, system supervision, alarm
handling, and automatic fault administration.
A program unit as described in this document is the telephony term
equivalent to the computing term "process", which is a running instance
of a program, including all variables and other states. From this point on,
only the term "program unit" will be used.
A common function is a program unit that is centrally located and can be
used by all program units in all servers. Regional functions are program
units that exists in several or all servers, executing independent of each
other.
For more information about task procedures, see operational directions
for ADMINISTRATOR USER’S GUIDE.
6.4.1 Service Functions
The service functions is a collection of general-purpose functions and is
used by the telephony application system and by the service system for
the following:
• System status monitoring
• Server configuration
• Server status
• Program unit configuration
• Hardware configuration
6.4.1.1 System Status Monitoring
The system status monitoring function is used to monitor the system
status at any given time to deal with special conditions, such as load,
dump or restart.
System status monitoring includes the following actions:
• Prevent any change of reload data through commands during load,
dump, or restart of any part of the system
• Prevent any change of reload data through programming from
voice terminals during load or dump
The reload data changes are not prevented in the entire system at
the same time, but in one server at a time during the action in this
specific server.
6.4.1.2 Server/Gateway Configuration
The server configuration function is used to keep and provide status
information regarding one server. It can also display information about