User manual

21/1551-ASP 113 01 Uen N2 2014-01-28 87
T
ELEPHONY SERVER SOFTWARE
– Process ID and path to the executable file for new and old
program unit versions
6.4.4 Start and Restart of MX-ONE Telephony System
6.4.4.1 System Start
The purpose of the system start function is to set the system into opera-
tion after an update, upgrade or boot procedure.
System start comprises two main functions:
• Initial loading, which means that program units are loaded into
memory.
• Initial start, which means that values are assigned to variables to
activate the system functions and to link together the system logi-
cally.
6.4.4.2 Initial Load and Start
The initial load and start function comprises the following steps:
• Load all program units into memory.
• Assign values to variables of all program units.
• Start the program units.
6.4.4.3 Manual Restart
The purpose of the manual restart function is to recover manually from
any kind of system fault.
The following can be manually restarted:
• The system
All program units are restarted. All traffic in the exchange is stopped
and for example, IP phones are unregistered.
•Servers
All program units in the selected servers are restarted.
• Program units
Selected program units are restarted.
• Device boards
The restart is carried out by an activation request from the
device-handling program to the stated board.
• Media Gateway